Jump to content
Why become a member? ×

warwickhunt

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    10,692

  • Joined

  • Last visited

 Content Type 

Everything posted by warwickhunt

  1. warwickhunt
    Sold pending payment
  2. warwickhunt
    You could save viewers of your thread a lot of time if you went through and deleted all of the unnecessary posts bumping the bass.
  3. warwickhunt
    [quote name='ash' timestamp='1350216368' post='1835813'] Is this one still around type bump? [/quote] It is type bump!
  4. warwickhunt
    DOH! That was an old pic of the bass on Photobucket. Your pickguard is still on Rita. [IMG]http://i54.photobucket.com/albums/g119/warwickhunt/100_2334.jpg[/IMG]
  5. warwickhunt
    Dave (the seller) and Dave (the luthier) are both top fellas so this will be a cracker. Dave (the luthier) fettles guitars for Mark Knopfler and does the finishing on Sobell acoustics, so you can expect a quality job!
  6. warwickhunt
    Are you keeping the 'P' pup? It was the only one that I was interested in!
  7. warwickhunt
    [quote name='phsycoandy' timestamp='1349987637' post='1833301'] SOLD PENDING [/quote] A Warwick selling... maybe I should put my SSI up for sale after all! Nice one.
  8. warwickhunt
    Still here.
  9. warwickhunt
    [quote name='Joe86' timestamp='1349398909' post='1825942'] Beautiful bass. Av' a bump on me. [/quote] Cheers.
  10. warwickhunt
    I've had an offer of £200 for the power amp and case if anyone wants the Hellborg @ £750!
  11. warwickhunt
    Never thought about the whole YOB thing!
  12. warwickhunt
    Bump
  13. warwickhunt
    [quote name='JTUK' timestamp='1349812291' post='1830966'] If you are pushing out the volume from a NV412 and on large-ish stages in a 1000 seater, that is where you need the bigger rig. I doubt my 2x210's would do it without very decent monitoring and maybe fills, with a 550w amp. ..and I am not sure I would be wanting to hook up less cab power into a DB750 that might have to ramp it up a bit. [/quote] I'd agree though I'd say that if you were playing 1000+ seater venues then your cabs are purely monitors and the size of the cab is possibly less relevant (unless the band have TOTAL disregard for on-stage sound); as you say at that kind of gig you'd be expecting decent monitoring/side-fills.
  14. warwickhunt
    I'm not sure what good sending the scan of an ID card might be (is it someone in the UK asking for that... doesn't sound like it), it isn't something that I'd ask for or find of benefit in ascertaining someone trustworthiness (unless it has your address, photo and can be backed up with relevant corresponding documents/images). Though conversely, I'd not take a blind bit of notice if someone offered me an ebay username as 'proof' that someone was honest, it can mean very little and is fairly flimsy proof of honesty. Unfortunately if it is an expensive item and you/the buyer are in different countries and can't reach an agreement, I'd just let it go and move on... unless the buyer has some super-duper credibility (a forum moderator etc) and you can trust them by sending the bass before payment. Have you considered using a '3rd party' to hold the bass/payment until you can both be satisfied?
  15. warwickhunt
    [quote name='PauBass' timestamp='1349798573' post='1830693'] Thanks for your input guys. I have the feeling that 2 DB112 is not going to be enough coming from a 700 Watt Bergantino cab? [/quote] Don't kid yourself! I went from a 2100 watt Tech Soundsystems 6x10 to the pair of 1x12DB cabs and I didn't look back. There is nothing that the Neo 6x10 cab could do that these DBs couldn't do!
  16. warwickhunt
    [quote name='crez5150' timestamp='1349787372' post='1830498'] I use 1 x DB112 and 1xDB112NT with a GK MB500 head and find it more than adequate for most gigs. Unless you are going out without PA support I wouldn't want anything more [/quote] Ditto, same cabs but with 550w Thunderfunk and I have played in various loud bands (sans PA) and the DB12s have been more than adequate for large pub/medium club gigs. I 'suppose' if it were a monstrously loud band with wailing full Marshall stacks and a drummer going through the PA when the bass wasn't, then I might say the 2x12 doubled up or a pair of 4x10 but you'd be fair going it some to need these!
  17. warwickhunt
    Stage I Custom Shop...! How so? There was no 'Custom Shop' per se in 92 (amendments were made in the factory as req'd by customers) but what 'custom' features does it have? The colour is uncommon but not a special order.
  18. warwickhunt
    [quote name='bob_pickard' timestamp='1349682199' post='1828910'] Is the pre-amp installed under the cover in the back or is there a cut out block in the side? I'm assuming the low output is the pre-amp gone down the swanny from your other posts? [/quote] The preamp is installed in a rear screwed on cover (all controls are front mounted). The low output is something I've enquired about but no idea why it is so quiet and it may be that I'll get it looked at because I don't feel that it is the preamp because it equally affects the magnetic pup. AFAIK the mag and piezo don't share a preamp so if it was just the piezo quiet then I could agree that it was a fried preamp but both being quiet makes me think that it is battery or wiring/socket problem. Seeing as how there is a cheaper AB20 for sale on BC for £325 (doesn't have fancy woods or mag pup), I think it could prove worthwhile having it repaired and increasing the value accordingly.
  19. warwickhunt
    [quote name='binky_bass' timestamp='1349632413' post='1828507'] awesome... if this was some form of 6-7 string beast, i would sell a testicle to make it mine! but for this... I would probably still sell a toe. Nice piece man! [/quote] Cheers! Just to reiterate; the magnetic pup is factory installed not after-market.
  20. warwickhunt
    The volume is as good as any other electro-acoustic (plenty enough for hearing yourself though you'd have no chance with it unamplified against a drummer). Postage isn't a problem as it has a hardcase specifically shaped/made for it; cost about £15-£20. Cheers
  21. warwickhunt
    If you need a plate to fit then just draw/trace what you require and ask Howard (the bass doctor) to make one to fit; his plate materials are absolutely stunning (not horrible red/pepperoni) and generally as cheap as an off the shelf jobbie.
  22. warwickhunt
    [quote name='karlfer' timestamp='1349119343' post='1822126'] Gorgeous, stunning, lust Fancy a very light Bob Glaub [/quote] If I wasn't having a clear out I may well have been asking for an accurate weight on the BG but...
  23. warwickhunt
    Thanks for the endorsement Luke!
  24. warwickhunt
    Howard (the bass doctor) could probably do you one very easily and the quality of material is second to none!
  25. warwickhunt
    On hold pending... my drummer buying it for his son! LOL
×
×
  • Create New...