Jump to content
Why become a member? ×

PaulThePlug

Member
  • Posts

    4,191
  • Joined

  • Last visited

Everything posted by PaulThePlug

  1. Nice.. nothing like a little something and a fumble to fall in love again...
  2. 0.1 arrived... Tried to adjust the truss rod to lessen the relief and flatten the neck before sticking on the shim steel... No Joy... opened up the super glued crack... So 101 Hard as Nails... ...and on with the shim steel... Its steel down on the foam rubber garage mats with a box of books on top. Hopefully the thin shim will conform to the fretboard radius. Then a sand of the shim over-edges to the fretboard. Fingers crossed!
  3. Really interesting post... My Son is looking at...
  4. Nice in Nice - Stranglers...
  5. Would you of chosen that one over another?.. Back it goes... Would you of had that one at £850? A place to start?
  6. 47 something capacitance thing... green it was...
  7. Bra-bar' Ann - Beach Boys
  8. Some Blah Blah... https://contact.bartolini.net/support/solutions/articles/5000587194-ibanez-basses-pickups-and-electronics
  9. My Ibby SR600 and others of the time Court etc had the Mk1 licenced Barts, these are a Reverse P in a Soap Bar. Sure about being Mk2?
  10. Got a Tonerider in my SR300 Passive P... Great Tone and Authority... Might i suggest a look at the wiring, cap value... 47uf... and pots? If ya got a spare £5 i cannot rate the Pure Tone Jack sockets highly enough.
  11. Faceache and a Cheeky offer of £15... Took the front badge off 'cos it's mahoosive on such a diddy combo... I'm sure it was obstructing the speaker... and now looks all the sleeker. Had the driver out and stuck a bit of left over wadding in. Doubt the 8" driver is 5 String Friendly, Fine with a Four... Remarkably useable single Tone control... Quite Sweet-Sounding with the Fretless...
  12. If ya don't want the Outline Packing foam ;-).. I want some surrounds for my SR400 with Dimarzio 123's... Here is my SR300 Maida Vale Stacked J's...
  13. 0000 wire wool and lemon oil for a clean and condition... 0000 wire wool and furniture wax for a polish... Dremel and a mop with a dab of autosol if frets grained and grubby w/ fretboard guard shim to give the frets a go Then one of the 4 Sided Nail Polish bricks... down thru the graded sides. https://www.boots.com/boots-4-way-buffer-10278878 Then a light Microfiber clothing... An enjoyable hour with a pint or jack 'n coke...
  14. Whats local on faceache and gumtree?Squier P or J, Ibanez SR300, Tangle 4k Rebel... what sort of music or sound you after?
  15. That's a lot of $£€... Have you tried the Senni HD206 @ £20ish of the 'bay? Might be worth a look at the specs...
  16. Hook upto a PC... Focusrite Scarlet thingy...
  17. West Berlin - Camel (Stationary Traveller)
  18. Get out the Cab...
  19. Light pressure, otherwise you get a little scallop between the frets...
  20. Train kept a rollin'.. various
  21. Reasonable Scratch and Control plates on Aliexpess if ya not in a rush for low £... just takes 2 - 3 wks These for my Aria Jazz P Modder...
  22. Page 6... Mike Dirnt...bass heads.pdf
  23. Aliexpress... Something like this... https://a.aliexpress.com/_mtflXLK Cheaper available.
  24. Wadded... @stevie advised to keep the wadding away from the port... All stapled up to prevent wafting...
×
×
  • Create New...