Nate

Mark Bass bumpage.

Thanks, Jamie! Hope all is well

Hey! Selling this Cort A5 as I'm upgrading a lot of my gear and don't use it much any more. Has done me well and sounds great. Very versatile. Pick up from NW London please! [attachment=174798:CORT A5 HEADSTOCK.jpg][attachment=174799:CORT A5 FRONT.jpg][attachment=174800:CORT A5 BACK.jpg] Below is the spec from the Cort site:[list] [*]CONSTRUCTION: Neck-thru [*]CUTAWAY: Double Cutaway [*]BODY: Figured Maple Top on Mahogany Body [*]NECK: 5pc Maple & Wenge, 1F 20.5mm, 12F 22mm [*]BINDING: N/A [*]FRETBOARD: Rosewood, 12" Radius (305mm) [*]FRETS: 24 / Large (2.7mm) [*]SCALE: 34" (864mm) [*]INLAY: Abalone Dot with Black Circle [*]TUNERS: Hipshot Ultralight Tuners [*]BRIDGE: Hipshot Trans Tone Bridge (5) [*]PICKUPS: Bartolini MK1-5/F & MK1-5/R [*]ELECTRONICS: Bartolini MK-1 EQ / 1v, 1blend, 3band, EQ on-off switch [*]HARDWARE: PT (Platinum) [/list] Gimme a shout if you fancy it!

Hello! Selling this due to an upgrade. Great condition and as you all know, a great sound. Super lightweight too! Pick up from NW London please! [attachment=174790:MARKBASS FRONT.jpg][attachment=174791:MARKBASS BACK.jpg] Spec from Markbass site: [b]INPUTS[/b] INPUT impedance 500 Kohm, max. voltage 15 Vpp BALANCED INPUT (XLR) impedance 22 Khom, max. voltage 25 Vpp EFFECT RETURN impedance 22 Kohm, max. voltage 25 Vpp [b]CONTROLS[/b] GAIN -80 dB to +23 dB range MASTER VOLUME GROUND LIFT switch on rear panel [b]EQUALIZATION[/b] LOW center frequency: 40 Hz; level: ±16 dB LOW MID center frequency: 360 Hz, level: ±16 dB HIGH MID center frequency: 800 Hz, level: ±16 dB HIGH center frequency: 10 kHz, level: ±16 dB VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut) [b]OUTPUT[/b] LINE OUT balanced XLR, max. voltage 10 Vpp EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT unbalanced, max. voltage 25 Vpp SPEAKER OUT speakon, 1/4" [b]OTHER[/b] WEIGHT 6.39 lbs / 2.9 kg DEPTH 10.1 in. / 25.6 cm WIDTH 10.87 in. / 27.6 cm HEIGHT 2.8 in. / 7.1 cm OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)

Pics coming soon - Promise!!

B b b b bump

I'm in Belsize Park. NW3

Hello chaps and chapesses (I've never said that before!) Selling my 15" EBS cab. I never use it. All in good working order and what not. Only issue is the EBS logo sometimes comes off... I didn't realise they were essentially kept on with a couple of sticky bits! It stays on for quite a while but sometimes drops. It's on at the moment! I've just moved into a new (and tiny) flat in NW London and as soon as I've cleared space, I'll get some photos up. Although, if you google it, it basically looks like one of those! Ha! Pickup would be ideal if poss... Gimme a shout if interested.

Megabump for a great job!

Would you consider selling?

Still for sale?

Still up?

Think you're meant to put a price up in this forum

Still for sale, Wibbler?

I can vouch for this young man. Decent bloke and good player! I'm tempted by this to be honest.... Hope all is well dude!

So, the neck was fixed, not replaced..? That worries me... :s

Oh deary me. RIP!

Still there?

Any pics..? Dunno if this is still for sale...

Any more pics..?

I've been looking for a year of my birth bass... Damn, this is tempting...

You mention a trade for something of a similar value.... How much would you say this is worth?