dyerseve

They are the original pups, this is my old bass. They have "made in germany" stamped on the back so will either be MEC or Schaller

I think everyone is sleeping on this bass! The Jazzman is the most versatile Warwick there is! This is a full blooded German Warwick with unbelievable tonal versatility, top quality hardware and fantastic ergonomics. Stone cold bargain!!!

I agree, very unusual to see. Great basses - the range of the tone filter is really unbelievable!

Up for sale is a vintage Ibanez MS10 Metal Charger distortion pedal. The pedal is in excellent condition, functions perfectly and comes complete with the original box and user manual. The pedal has just been serviced - all of the potentiometers and contacts have been cleaned and the pedal has been fully checked over and given a clean bill of health. The pedal is missing one of the original knobs but I have included a knob the fits the pedal and functions perfectly. If you dont like it, you can just pull it off. From original sales brochure: Features If you are looking for that hot and heavy, massive metalmania distortion, hook up with an Ibanez MS10. It has more "raw gain" than any other distortion available. It has five controls to let you really capture the rage in your guitar. There is a Drive control that varies the amount of distortion, an Attack control for predistortion, treble and boost and Punch and Edge controls that provide post distortion equalization. Plug into an MS10 and you will swear that you have a wall of power behind you. Use The MS10 was designed specifically to recreate the tonality of large British amplifiers. Because of various reasons including different tubes (valves), equalization voicing, speaker characteristics and cabinet resonances these amps sound drastically different than other amps. The punch control simulates the cabinet resonance at certain low frequencies while the attack and edge concentrate on high frequency e.q. and speaker traits. Distortion is adjustable and at full settings simulates not only pre-amp clipping bu adds the effect of power-amp and speaker overdrive. As with any distortion device, location in the "chain" or signal flow is very important. It is usually desirable to distort the guitar signal first before adding further processing (with possible exception of compression). Since many large "stacks" don't have effect loops or outputs after the pre-amp, these amps are "miked" and the sound engineer adds processing to the microphone channel. In large halls or studios this is fine because the guitarist hears the finished product through a fine monitoring system. But for most players this is impossible. Even if you own an amplifier like this, chances are you aren't getting the "finished product". The MS10 at the front of a chain of processors may actually sound better than processors fed into expensive amplifiers. Don't distort your processing, distort the guitar then process the distortion. (experiment with placement of e.q., compressor and phaser, but always place delay effects "post distortion") Shipping to UK will be 18GBP, within the EU 15€ and within Germany 6€

**SOLD** For sale is a fantastic high end Japanese Ibanez SR1010 with a SOL finish. Research shows that the model number is SR1010SOL and the serial number reveals it was made in the legendary FujiGen factory Production year: September 1998 Serial number: 38096 This bass features a mahogany body, wenge and bubinga neck with a rosewood fingerboard with mother of pearl inlays, quality hardware including Gotoh tuners and an Accu-Cast B20 bridge. The electronics are also very high quality and feature pickups developed in the USA and an active Vari-Mid HiFi EQ. With this EQ you can set the center frequency that you want to cut or boost. There are also controls for reducing/boosting the treble and bass. The neck is a typical slim Ibanez neck that plays like a dream. The bass is very light with only 3.8 kg. The bass is in very good condition - there are some light playing marks and hardware tarnishing, but no damage and everything works perfectly. Luminous fret markers were added to the side of the neck by a previous owner. The bass will be shipped in a hard case. Shipping to UK £55, EU £25

**SOLD** For sale is a beautiful vintage high-end Ibanez from the late 80's. Research shows the model number is SR800LE and the serial number reveals it was made in the legendary FujiGen factory Year of Production: September 1987 Serial Number: 42619 Features: Offset Double Cutaway Basswood Body, Bolt-On 3-Piece Maple Neck, 24 Fret Rosewood Fingerboard with Mother of pearl inlays, Gotoh tuners, AccuCast B20 bridge, an active Regulated Lo-Z J-style and an active Regulated Lo-Z P-style Ibanez pickup, Volume / Blend / Bass and Treble EQ controls, black hardware. This bass has a very clear and powerful tone, it's incredibly easy to play and the EQ offers plenty of adjustment options to find your perfect tone. This is the second SR800LE I have owned. The other was used in a different tuning - this one was only used in the standard tuning. Overall the bass is in very good condition, especially for a 35 year old instrument! All electronics work perfectly, as does the truss rod and hardware. There are a few minor dents as you would expect on any used instrument but you have to look closely to find them - see photos The fingerboard has been cleaned and oiled, the frets have been cleaned and polished. All potentiometers have been cleaned with a contact cleaner so they work perfectly. Nice ergonomic and well balanced bass. At just 3.6 kg, it's also pretty light! The bass comes in a Warwick gig bag, packed in a sturdy shipping carton. Shipping to UK £55, EU £25 - cheaper options are available if I detach the neck and the buyer reattaches it upon arrival....