Jump to content
Why become a member? ×

tommorichards

Member
 View Profile  See their activity

  • Posts

    1,055

  • Joined

  • Last visited

 Content Type 

Everything posted by tommorichards

  1. tommorichards
    Dog poo is a great, relatively unknown, wood filler
  2. tommorichards
    With a rosewood neck, id say black with tortoiseshell plate. Or natural with a black plate. Maybe a hidden pickup by the neck, under the scratchplate?
  3. tommorichards
    1975 Gibson Ripper/G3 bass, modded. Here is a modified Gibson Ripper bass, with an all maple body and neck. Its had Jaydee custom pickups installed to turn it into a G3 bass, with a 3 way switch for the neck and bridge pickups, with an added switch to turn the middle pickup on. Its also had a hefty brass bridge installed (it comes with the original 3 point bridge), as well as a brass nut. It has also had a brass plate added to the back of the neck, but it now removed, so that only the holes are still visible. it could be restored back to a ripper bass by getting Seymour Duncan Ripper pickups and installing them. Comes with the original hardcase. Weight is 4.6 kg, or 10.1 lbs in old money. Collection from New Brighton, Wirral. Can be tried out as well. No trades.
  4. tommorichards
    2008 Fender Jazz Bass in Candy Apple Red, Made in Mexico. 9lbs / 4.1kg A beautiful combination of maple fretboard and candy apple red body. The body is very clean, minus a few dings, but has spent most if its life hanging on a wall. It's a jazz bass, two pickups, Vol/Vol/Tone controls. Quiet, crackle free, smooth moving tuners. Nothing much else to say about it. Collection from New Brighton, Wirral. Courier can be arranged at buyers expense. Now sold.
  5. tommorichards
    where about are you?
  6. tommorichards
    Looks like the one from here
  7. tommorichards
    so how is this still here
  8. tommorichards
    Epiphone Jack Casady bass, with hardcase. Its had some amendments from the original bass, as it was missing a few things when i arrived up it. Its had new machineheads, a new bridge, a new pickguard made, new pots and control knobs, new strap buttons, and a fresh set of strings. However, the pickup, transformer, and impedance selector are still original. There is some damage by the pickguard due to it being left alone missing pieces for so long, the bracket rubbed against the body. No trades, and feel free to try it out, I'm in New Brighton, on the Wirral. I can post, but its up to you whether or not you want to also pay the insurance on it.
  9. tommorichards
    I want to know why they moved the bridge so far up, that doesnt make it a shortscale, or it does, with impossible intonation issues
  10. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  11. tommorichards
    Ahh sorry, its been a while. Those sold on ebay a few months back. I've not updated the list.
  12. tommorichards
    I have a fair few of these things. Anything specific?
  13. tommorichards
    cant wait to see how this turns out. I love a good mix and match bass.
  14. tommorichards
    It could also be truss rod adjustment needed too, you're right there @BreadBin I posted when I was tired, and thought the obvious had been tried.
  15. tommorichards
    Took it around Spain, over cobbles and up and down steps. They worked flawlessly. I did notice that the cab leans slightly forward with them, so I just need to put a spacer on the rubber feet to lift the front up, and then it'll be spot on.
  16. tommorichards
    Well they fit perfectly, and keep it the right height. I'd definitely recommend them, they feel much smoother than the stock ones too.
  17. tommorichards
    It is a pain, the rickenbacker bridges are the same too, as are the normal 3 point Gibson bridges. Fender got it right first time.
  18. tommorichards
    No worries dude. Its annoying that its hard to find replacements in the UK. If these work, i may have stumbled onto something.
  19. tommorichards
    Well, there are a few options, considering its a neck through and so the usual remedy, a shim, isnt possible here. 1 - Change the bridge for one that will allow a lower string height 2 - Make the nut slots a tiny bit lower. Sometimes they come quite high and so may make the action a bit high. 3 - Recess the bridge. Not too hard, and as long as you're careful, shouldn't look too messy. 4 - File the slots in the bridge saddles.
  20. tommorichards
    Must have been the sanitation department at BMW that designed that one.
  21. tommorichards
    Hmm, he has no idea what very good condition actually means.
  22. tommorichards
    He makes some amazing stuff. I've no idea who would play it though.
  23. tommorichards
    It sounds like a valve has gone, and messing around could cause more damage. Down your way, it seems as the main contenders are Keld ampworks guitar amp repair, or The jukebox man.
  24. tommorichards
    I've used a sticky vinyl sheet before to make a matching headstock. It looks okay from a distance but not perfect. It depends what quality you're after.
  25. tommorichards
    If you're on Facebook, I think a chap called Tim Allen makes them, and I know he hangs around in the rickenfaker page. There are also a few online shops that make them, depending on the material used. Also check out the affiliates section on this site and a few may be advertising that they make custom ones. And, if you still can't find someone, send me a Pm, and I can make one for you. Though I'm a busy guy, and wouldn't be able to get it started for 3 weeks. I'd probably charge you for the material and a tenner on top.
×
×
  • Create New...