Jump to content
Why become a member? ×

eubassix

⭐Supporting Member⭐
  • Posts

    3,042
  • Joined

  • Last visited

Everything posted by eubassix

  1. Great cab(s) _ I have the 1260 compact (Eminence Gamma 12". Eminence LA6cbmr 6.5" + Horn) 300/8 :-
  2. Had an early/original/fretless version of this years back. Loved it. Imagine yours might have looked like this (below) before the changes (?) :-
  3. Purchased a nice pickguard ( / scratchplate?) from Peter recently; excellent, prompt communication throughout folowed by a swift, safe delivery !
  4. there are some exceptional necks on the Classics. I have the coral/maple model, with some serious flame :-
  5. Might be possible. I did speak to a couple of respected UK luthiers and they were concerned re. the coin, the holly wood (difficult apparenly) and not knowing what epoxy/resin(s) might have been used to both fix and surround the coin.
  6. Thanks Jon ... sorry, I thought I'd included that. It's reading 9.1lbs on our digi-scales. You're right about the weight Q. Maybe it should be included with the required info (location, price etc.) ... just tried it on the alternative hand-held luggage digi-scales = 8.88 lbs (could be right as it matches the price?!). So probably somewhere in the 8.8 - 9.1 range..................
  7. ditto: rare colour & great condition
  8. Thanks for the update / link BCH - some really interesting options. Aesthetically (+personally) I prefer the original (?) front grille(s); not ure if they remain an option?
  9. Ashdown Spyder 330 Dual Tube Pre Amp Bass Head. Condition is Used / refurbished. Driven by 2 pre amp tubes, sounds really good, mid and bass shift switches to provide a variety of tones. Overall controls: L + H imputs; FX send-return; [ROTARY] Middle, Bass, Treble, Gain, Master; [SWITCHES] Mid, Bass, Bright, Mute, Pre/Post; Ashdown VU Meter. (Rear : DI + 2x speakers.This was in a bit of a state (aesthetically only), so have simply refurbished the chassis using hardwearing 'plastidip' (black, plastic paint) and fitted new corner protectors. Will be packaged very well/carefully for Courier (24/48h).
  10. sorry. I had quite a few Q's re, weight but only just managed to borrow a digital luggage scale - reading 9.7lbs.
  11. 15 inch bass speaker. Excellent used condition. Make unknown. c. 14cm (5.5") overall depth. Large magnet construction of c.7.5" (19cm) diameter. 8ohms power unknown but would estimate 300 watts (used previously with 330w head w/out issues). Includes a FANE J.73 (made in Japan) Horn (c. 18.5 x 7.5 cm and c. 16cm deep). Plus 2x interconnected jack sockets and original wiring (split for removal but could be re-joined) Ideal for bass unit - this is where it was removed from previously. Local pick up preferred but I can get a Courier quote if required or meet-up relatively locally.
  12. Ashdown AAA After-8 Bass Combo.Excellent condition (see photos), although I've had to add some black tape to one end of the rubber strap which was wearing against the fitting + the inner metal strip; probably a common issue - very little used (home only). Great little unit for practice+. Happy to arrange Courier if required.
  13. Thanks to the invaluable assistance of KiOgon (John), my Tao J bass now has an excellent set of Bourns mini pots c/w VVT with S/P on the tone pot (no batttery) with Standard Jack. The original owner had seriously cut/shortened the wires on the SD Hot Stack (STK-J2) pickups, so John also created a link-loom to facilitate easier, solderless connection/s. Highly recommended - John's messages/photos/diagrams were very clear, helpful and explanatory, and the unit(s) arrived really quickly.
  14. Thanks Ruarl - instrument is with me, in the north-east of England - ramp is flat (but the f/board is only slighly radiused & string heights quite level over the ramp) - bridge & 'nut/headstock' will take both DBE and standard strings. If you look closely at the last photo you can see the channels and small hex-(clamp)-bolts above the current dbe strings.
  15. PM replied
  16. ?... does this have (or show evidence of) '.. one small finish chip on the neck between frets 4-5 ..' ?
  17. Thanks, will check and update
  18. Squier JV sold
  19. sold
  20. ACG (UK) Salace Headless 5: Custom (Specification Level). Top/Back Wood: Holly top with Bloodwood accent; Body Wood: Black Walnut; Body Finish: Satin Lacquer; Neck Wood: 5 piece Wenge/Bloodwood; Finger Board: AI Birdseye Maple; Scale: 34″; Neck Finish: Satin Lacquer; Pickups: ACG RFB ACG PB in Bloodwood ramp; Hardware: ETS Bridge/Tuning unit, ACG Headpiece Dunlop Straplocks; Pre-amp: ACG EQ03 5K filter pre. Exceptional instrument in really excellent condition (see photos). c/w Blake-Apex semi-solid case (designed for guitar/s but works well for this headless bass with an overall length of c. 100cm or 39"). Narrow(er) string spacing of 16.5, although the saddles are adjustable. @ nut/zero-fret: c 9mm). Initial photos show bass as-is, with a small dark cover (25mm) over the gold-sovereign designated by the original owner (this is recessed/flush with body top). Also a photo(s) with coin w/out cover. The coin itself has a value of £340-550 (conditional) but is pretty much impossible to remove w/out damage to bass, coin or both. Exceptional bass acquired via BC trade but I can't adjust to the narrow string spacing & frustrated in being unable to unmodify the personalised modification. https://www.acguitars.co.uk/project/093salaceheadless5/ £1234
  21. TAO Custom Jazz Bass + (Moses Graphite USA). Incl. Courier. Tao Jazz Bass Guitar. Unique, custom build.
  22. on again :- https://www.ebay.co.uk/itm/Wal-Fretless-5-string-bass-with-extra-fretted-neck/203272389517
×
×
  • Create New...