
eubassix
Member-
Posts
3,042 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by eubassix
-
-
Neck is quite an attractive maple/maple - Vol + Vol + Tone - current knobs are chrome. 9lbs. 34" scale; 1.5" nut; 9/19mm spacing/s (nut/bridge). The body had some holes which required filling/colouring. The main issue was the over-large neck pocket (so there is a gap to either side of the neck - but not obvious from a distance). the s/plate is new and matches better than in the photos. new 40-100 - Nickels. Decent chrome bridge. Decided to use some black tuners as the maple neck/headstock is so light. Good quality pickups. Action OK but not easy to set ultra-low, 'F' logo added. Price does not include a case/bag OR Courier; but might be able to find something and offer delivery (at cost) for full or 'split' bass :-
- 1 reply
-
- 2
-
-
Neck is maple/rosewood - I think the seller maybe modified (headstock) a budget but decet J neck then added his own logo (since replaced with a 'F') Vol + Vol + Tone - current knobs are the standard Fender Black versions. Very light at only 7.2lbs. 34" scale; 1.5" nut; 9/19mm spacing/s (nut/bridge). The body is quite badly finished and painted but not obvious from a distance. the s/plate is new. new 40-100 - Nickels. Decent Wilkinson chrome/brass bridge Action OK/ quite-low, 'F' logo added. Price does not include a case/bag OR Courier; but might be able to find something and offer delivery (at cost) for full or 'split' bass :-
-
Neck is Fender J type - fits well; maple/rosewood (looks like an original MiM) Vol + Tone. 9.8lbs. 34" scale; 1.5" nut; 10/18mm spacing/s (nut/bridge). The body is generic. Finished with parts I had lying about - NOTE that 3 tuners are decent/chrome, but as I couldn't find a match (for ages) the 4th (A) is a Gold tuner. OLP neck-plate (chrome). Purple finish is OK and the s/plate is new. There a hole (?) in the bottom/rear of the body. f/board is de-fretted (slots filled; reasonable job). Fairly new 45-105 - Flats. Action OK but hard to get ultra-low, 'F' logo added. Price does not include a case/bag OR Courier; but might be able to find something and offer delivery (at cost) for full or 'split' bass :- (SOLD on ebay)
-
- 2
-
-
bass currently plays active but the whole centre-rod pulls out rather than switching). Neck is Fender J type - fits well. Vol + Pan + B/T stacked. 8.8lbs. 34" scale; 1.5" nut; 10/19mm spacing/s (nut/bridge). There's a chunk out of the body (below knobs/edge) which has been re-coloured *& coated. New 40-100 - Nickels. Action OK but hard to get ultra-low, 'F' logo
-
‘THUNDERBUCKER 66s’ ( 5 string version* ) http://thunderbuckerranch.com * Just checked and current price is c £470 (In the USA) based on current exchange for the 2x pickups, 2x covers, 2x surrounds, 2x spacers + postage; if hit with VAT it would raise to £564 plus possibly some 'duty' .. but no idea what that might be. Due to the relatively narrow dimensions, these would also work in a 4 string bass: 924m (3.65") x 405mm (1.6"). Comes with everything required (pickups + covers + spacers + rings + all screws) and includes P &P. The pickups are very new/shiny but do have some minor marks upon very close inspection (might well polish out with the correct cream/buffing tool)
-
OK/thanks. I'll check those myself (excellent idea) and see if anything matches. Might also be worth checking current model range offered.............
-
Thanks Andy - could be, although shape looks slightly different (notably the long, thin section by the final-frets/E-side (?). There's no 'U' truss-rod cut also. Is the bass in the photo yours? if. so, the distance between the top edge of the neck-pickup-cut & neck-cut would be useful. The one I have is c. 66mm; whereas the std. p/guard (t/shell ) is c. 94mm.
-
Just been handed this BLACK F' p/guard but no idea what it's off / from / for? ... any ideas / suggestions. It's patently wrong for any std. MIA, MiM, MIJ jazz, but wondered if it might have been created for a specific (modern / MIC / 24F? ) J-type instument. ?? It's also incorrectly routed/cut for the neck pickup (sligtly too 'tight' at the edges) but that's easily remedied :-
-
-
Mike purchased a Tech 21 Sansamp Deluxe VT pedal, to be sent to Tallinn Estonia (!). Great communication throughout & prompt, personal payment. Had some worries re. destination (first time sending something to Estonia) / using PO-RM (only sensibe option price-wise) ... but arrived OK, safely and on-time. Highly recommended to all BC'ers.
-
-
-
-
-
-
Exceptional instruments!.. lovely to see one here, and a great shame that the Co. didn't continue long after Greg died so prematurely. I had an XT-33 / 5 IEP years back, bought directly from Greg. He once left a message for me (answering-machine, with a mini-tape!) which I had to take to work and have a USA colleague interpret - Greg's S,.Carolina twang was so strong (!). Adding some photos :-
-
Tech 21 VT Bass Deluxe (SansAmp Character Series) NEW. incl P&P:- https://www.bax-shop.co.uk/bass-equalizer/tech-21-vt-bass-deluxe-sansamp-character-series Gift, greatly appreciated, but not 'my type-of thing' at all...... New unit, box, all original instructions etc. Price includes Courier/packaging.... and is now REDUCED to £180 (incl.) !!!
-
?... not sure what that means, but have just replied to your PM. I PM'd bebebass yesterday. As it was a trade being offered - from the USA - I wanted to be sure re. USPS cf. UK/Courier shipping (time differences) and the potential (relatively recent) issues re. certain woods being banned from entry into the USA. I've seen a few BC / ebay listings stating that USA purchases are no longer possible due to 'CITES' (?).......................
-
-
-
-
- 12 replies
-
sold:Strat'Riks'F-copyBlk/rw
eubassix replied to eubassix's topic in Accessories & Other Musically Related Items For Sale