All Activity
- Past hour
-
rmcki started following Warwick streamer double buck 5 string bass
-
Sammybass started following Markbass Traveler 102P 400W 8 ohm Cab and Markbass Traveler 151P 400W 8 ohm Cab
-
-
-
Just got a EBS MB3, need a cheap IR loader for headphone practice.
dave_bass5 replied to dave_bass5's topic in Effects
Thanks. I should clarify that it’s just going to sit between the EBS and my computer interface. I’ll take the headphone feed off the interface so no need for any headphone socket etc, although obviously i can just ignore that part. Also needs to be mains powered so i dont have to unplug anything when not using it. I see that NUX do one called Pulse. A bit more than i was hoping to pay but as i already love the IR’s in the MLD maybe that one will be better. -
Suggestions for an inexpensive P Bass with a Jazz neck
ghostwheel replied to Minininjarob's topic in Bass Guitars
Sire P7 has the width at the nut of 38mm according to their web-site as well as Thomann's one. -
Suggestions for an inexpensive P Bass with a Jazz neck
Minininjarob replied to Minininjarob's topic in Bass Guitars
I’ve just checked the specs and it has a 1.5” neck so that’s Jazz size yeah?? I’m thinking a blue one and swapping the hardware to all black, new electrics and a nice pickup set (if the standard ones I don’t like) and that’ll be amazing. For maybe £250 all in minus new pickups. That’ll look amazing. Need to go and check one out ASAP. -
potato bass started following Price drop Kiesel Icon 6 mint £2100
-
-
FS / FT MarkBass TTE 801 PayDay Price Drop Now £425
Stealth posted a topic in Amps and Cabs For Sale
Bought this recently from Bass Direct whose write up I have shamelessly stolen (`Hope you don’t ming Mark!) it’s a great amp and stupidly loud but not quite the sound in my head right now. I have fitted a full set of brand new JJ valves 3 x ECC83 1x ECC81 The Price includes UK postage or Local delivery. Trades…….. Aguilar Tone Hammer 500 EBS Reidmar 750 Ashdown ABM / Rootmaster Orange Little Bass Thing MarkBass Rocker Try Me ??? Heres all the in-depth stuff The TTE 801 is the amp of choice for those who want a warm vintage tone with stadium-rocking power. As with the 500W version, the TTE 8001’s vintage vibe was carefully engineered with features such as an classic-style tube preamp, a tube compressor, a simple 3-band passive EQ section, a “Colour” filter (a tubeadaptation of the famous Markbass VLE control), but gets amplified by a potent 800W power amp that features our innovative Tube Technology Emulator, giving even more tubey warmth. Current technology is brought together with classic tone concepts in a head that looks and sounds vintage—but features some special adaptations of the Markbass innovations that put the brand on the map! The TUBE HEART of the TTE 801 makes this head an incomparable vintage sounding amp!!! But there's no better way to understand “Modern Vintage” than to plug in the amps and let the tone explains itself! This amp is presented in fantastic condition with a gig bag included. PREAMP PREAMP: Tube TUBES: 3x ECC83 + 1x ECC81 (compressor) POWER AMP POWER AMP: TTE (Tube Technology Emulator) POWER: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms EQ (passive) BASS MIDDLE HIGH CONTROLS COMPRESSOR COLOUR (TUBE-DRIVEN VLE) OUTPUTS LINE OUT: balanced XLR, max. voltage 20 Vpp SPEAKER OUT: two speakon/1/4" combo OTHER WEIGHT: 14.11 lbs / 6.4 Kg WIDTH: 18.90 in. / 48 cm DEPTH: 10.24 in. / 26 cm HEIGHT: 7.87 in. / 20 cm POWER REQUIREMENT: 100/120V; 230V; 240V --
- 2
-
-
lemmywinks started following Just got a EBS MB3, need a cheap IR loader for headphone practice.
-
Just got a EBS MB3, need a cheap IR loader for headphone practice.
lemmywinks replied to dave_bass5's topic in Effects
The Sonicake Pocket Master has a headphone out and is within budget, it's also tiny and contains a rechargeable battery. Supports IR and also has a few NAM capture slots. -
Found one on Thomann..............I cant believe it ..............same problem ! M1 works perfectly except that the BT logo does not light up , even though its paired to my mobile or iPad Anyone else having this problem ? Going to get in touch with Mooer , see what they say I`m awaiting Thomanns decision ( maybe they are checking stock ? )😄 Pete
-
Used for a few months …. spec below No more batteries to change, no more tangled cables to trip over. The FuelTank is the perfect power supply unit for guitarists who want to focus on their performance, not their gear. Delivering 1.500 mA of power through ten DC plugs, FuelTank powers all your pedals, keeping you running on full power night after night. With a compact design, FuelTank fits conveniently every pedalboard including the T-Rex ToneTrunk effect board. And it comes with all the cables you need to get you up and running. Key Features The Only Non-Isolated Power Supply! - Non-isolated power supplies also have an efficiency advantage. The lack of isolation barriers provides direct control and monitoring of the output, which enables better performance and regulation. All the Cables you Need – The Fuel Tank comes complete with a collection of different cables to connect your pedals efficiently. Pure Classic Power Fuel Tank delivers 1.500 mA of reliable power. Two of the ten outputs provide 12-volt power with isolated ground, one DC and the other AC, for AC pedals. Each output is short-circuit protected. Eight 9-volt DC output plugs, all sharing the same ground. Giving a total of 500 mA One 12-volt DC output with isolated ground, giving 500 mA One 12-volt AC output with isolated ground, giving 500 mA The Only Non-Isolated Power Supply What Is a Non-Isolated Power Supply? As you may have guessed, a non-isolated power supply does not have insulation to isolate the circuit. Both the input and output share a common ground, so the current can flow between them through a single circuit. What's in the Box? MAINS input power plug, 3-pin standard plug One 5-connector link cable/daisy chain for the DC outputs Eight black extension cables for the DC outputs, length 25 cm Ten black extension cables for the DC outputs, length 50 cm Two red extension cables for the 12-volt AC output, 25 cm Who are T Rex? T Rex are based in Denmark and have been established since 1996. They are one of the original "boutique" pedal manufacturers, offering guitar and bass players a superior range of FX pedals. Specifications The dimensions of the FuelTank are: L:15,8 cm H:3,8 cm W:7,6 cm Notable Points Want to mount this underneath your pedalboard? Mounting Brackets that attach are sold separately. If you have a pedal that only accepts 18 volt, you cannot use the Classic. You need the FuelTank Chameleon or the FuelTank Junior and the yellow voltage doubler cable.
-
Zoom multi stomp pedal ..in good condition with box and instructions £60.00 inc uk postage 58 bass effects and amp/preamp/di models, including modulation, equalization, delay, and reverb Up to 4 effects can be used simultaneously, in any order 50 memory locations for the storage of user-created patches 30 preset patches Onboard chromatic tuner supports all standard bass tunings
-
Darkglass Duality fuzz pedal ..in good condition and comes with box £90.00 inc uk postage Fuzz Contains 2 fuzz circuits - a sawtooth wave and a hard high-gain sound that can be combined for a wide range of fuzz sounds Controls: Duality, Level Bypass footswitch Status LED True Bypass Input: 6.3 mm jack Output: 6.3 mm jack Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside) Power supply via 9 V DC mains adapter (not included - suitable mains adapter: art. 409939) Power consumption: 40 mA Dimensions (W x D x H): 50 x 100 x 45 mm Weight: 340 g Made in Finland
-
-
'99-'03 Spector Q4 Pro w/ Dtuner (inc generic hardcase) £400
andydye replied to andydye's topic in Basses For Sale
-
andydye started following Powersoft Digam LQ2804
-
-
hen barn started following 2025 SE Bass Basheroo! Provisionally Sunday 9/11/25
-
2025 SE Bass Basheroo! Provisionally Sunday 9/11/25
hen barn replied to NancyJohnson's topic in Events
I’m in ! -
Suggestions for an inexpensive P Bass with a Jazz neck
Minininjarob replied to Minininjarob's topic in Bass Guitars
Got a link for that Chinese neck? -
Suggestions for an inexpensive P Bass with a Jazz neck
Minininjarob replied to Minininjarob's topic in Bass Guitars
Thanks that’s really helpful. I have a Player model, but I have a Musicman Sterling USA which has an amazing neck and I’d like to have the same on a P without messing with mine. -
dave_bass5 started following Just got a EBS MB3, need a cheap IR loader for headphone practice.
-
Any suggestions? Ive seen the Sonicake IR loader and it looks good, but wondered if anyone has any other recommendations in this price range. £50 max I guess. It's purely for headphone practice at home, will never leave the house. Not even fussed about what it has in it etc, I just need to get that cab feel. Ive been using a Nux MLD preamp and got hooked on IR's, although I turn the IR off when using it with the band.
-
Suggestions for an inexpensive P Bass with a Jazz neck
Minininjarob replied to Minininjarob's topic in Bass Guitars
Whats the neck like? -
ShadesOfBlackBeard joined the community
-
I imagine from a manufacturing point of view, it’s easier/cheaper to put the control panel into the top? That way the front can just be a simple grille cloth and speaker baffle.
-
Stealth started following Assorted Used Valves all working £30 posted
-
The Nurse - The White Stripes