LED lighting.

[Stub Mandrel]

On 13/08/2025 at 10:02, Phil Starr said:

I can never work out if this is just common sense or I am slightly bonkers/obsessive

 

You are not alone. I can only keep things tidy if they have a place.

[Stub Mandrel]

I bought some cheap PARs from Amazon. Aside from cheap plugs they are great, sound to light, dmx and everything. I ordered two more and they were basically remote control light bulbs.

 

They must have sent the wrong model the first time.

 

I have a few other bits and keep meaning to get a decent Derby.

 

I also bought two tiny USB 'R2D2' lights from Temu for about a fiver each. I got the idea after seeing similar ones at a club. Sat at the back they cover a huge area of ceiling and back wall with gently moving patterns of rgb dots that chase through the combinations. Take 2 minutes to set up and add a lot to gigs in little venues where there's no room for proper lighting.

[Woodinblack]

3 hours ago, Stub Mandrel said:

I also bought two tiny USB 'R2D2' lights from Temu for about a fiver each. I got the idea after seeing similar ones at a club. Sat at the back they cover a huge area of ceiling and back wall with gently moving patterns of rgb dots that chase through the combinations. 

 

I bought a laser from aliexpress for a fiver inc shipping. Powered by USB, works surprisingly well and adds some patterns and a few LED colours.

[Stub Mandrel]

1 hour ago, Woodinblack said:

 

I bought a laser from aliexpress for a fiver inc shipping. Powered by USB, works surprisingly well and adds some patterns and a few LED colours.

 

 

I have a couple and so does our lead guitarist which is a bit much! Pink Floyd eat yer heart out!

 

It's ridiculous how cheap they can be and that even on usb power they are bright enough for a club.

[police squad]

13 hours ago, Phil Starr said:

Mine came with the light and are shaped to fit just that light. You can buy acrylic sheet cut to size but I've no idea if this would be suitable https://www.cutmy.co.uk/plastic/acrylic-perspex-sheets/frosted/translucent/3mm/L1020-W80/

I've ordered some gel type stuff to try but thanks for that. I've never thought of a diffuser but it's a great idea

[Phil Starr]

 

 

13 hours ago, Woodinblack said:

 

I bought a laser from aliexpress for a fiver inc shipping. Powered by USB, works surprisingly well and adds some patterns and a few LED colours.

We have something similar, ours have low power red and green lasers that project tiny, intense moving dots in a matrix. They run off power supplies but i've adapted ours to run off a USB power pack to cut down on leads. They were about £10 ea.

Edited 2 hours ago by Phil Starr