Jump to content
Why become a member? ×

Recommended Posts

3 hours ago, Greg Edwards69 said:

Apologies for the zombie ressurection!

 

I have a couple of questions regarding the Sonicake Boom Ave - I'm thinking about getting one as an inexpensive backup to my Helix.

 

Does the compressor add a significant volume boost the more you turn it up? I had a Valeton Dapper that did this and I wasn't keen on the amount of make-up gain it applied.

Does the Octaver track well enough down to open E?

Is the pre-amp of the Ampeg variety and does the top end sound good direct from the XLR to a mixing desk? Again the Valeton sounded a little harsh.

Thanks in advance.

HI, the compressor does add volume yeah, even with the boost set to minimum. The octave was good, but didn't track well down to e. The preamp was quite scooped and modern sounding to my ears, the DI out had something really nice about it - can't exactly say what, but I really liked its punch. Sadly mine packed up - one of the foot switches gave up the ghost so it sits in the unused pile now. 

  • Like 1
Link to comment
Share on other sites

14 hours ago, gafbass02 said:

HI, the compressor does add volume yeah, even with the boost set to minimum. The octave was good, but didn't track well down to e. The preamp was quite scooped and modern sounding to my ears, the DI out had something really nice about it - can't exactly say what, but I really liked its punch. Sadly mine packed up - one of the foot switches gave up the ghost so it sits in the unused pile now. 

Thanks for that. It still might do the job as a "hope I never need to use it" backup. They're currently in the amazon black Friday sale for £55 quid. I might just get one at that price.

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

This is my most recent incarnation. The Q Strip is great, although obviously no drive option. In fact this was after sound check. I got bored waiting for 3 hours for the food service to end so we could do the Xmas party thing, so packed the tuner away and just had the Sansamp there using phantom power. Was in the PA too.  The cab is an RCF Art 732a. It’s a bit too big for my liking, but that said it was a city centre gig and I was able to walk it all from the car park. See pic

IMG_1205.jpeg

IMG_1206.jpeg

IMG_1208.jpeg

IMG_1211.jpeg

IMG_1204.jpeg

Edited by nottswarwick
  • Like 8
Link to comment
Share on other sites

  • 5 weeks later...

My ampless set up.  Wireless into EBS Microbass II, line out to tuner (which is also a backup DI), One Control Hooker's Green in the loop.  Will be trying it for the first time next week at the tech rehearsal for a ska band I've joined.   I've used in ears a few times with my current band, but never gone without backline before.

PXL_20240107_213807850~3.jpg

  • Like 3
Link to comment
Share on other sites

On 27/08/2023 at 12:12, Baloney Balderdash said:

Yet another rendition:

 

And yet another:

 

Quote

 

My entire signal chain explained in written form  (currently in the process of rearranging my setup, following is the most likely outcome) :

 
(*pedals listed in [ red/bold/underline text ] are "always on" effects*)
 
 

4 string 28.6" scale Ibanez GSRM20 neck + GSRM20B body Mikro Bass (equipped with an EMG Geezer Butler P pickup, and strung with Elixir Nanoweb coated nickel-plated roundwound hex steel core guitar strings, gauge .068 - .052 - .038 - .028, tuned in tenor bass, A standard, tuning, that is as the 4 upper strings of a 6 string bass in regular B standard tuning) ->

 

->> XVive Undulator (tremolo pedal, but never actually engaged and used exclusively for its great buffer) ->> EHX Black Finger (tube driven optical compressor, with 2 preamp tubes operating at proper high 300V plate voltage, mainly used as a tube preamp stage, driven to just at the edge of the tubes's breakup point, but with some very subtle compression dialed in as well) ->> TC Electronic Sub'N'Up Mini (used exclusively for an 1 octave up effect, delivered by a custom made Toneprint, dialed in to mimic an 8 string bass/12 string guitar, to fill out more sonic space, mostly used in conjunction with my high gain distortion setup) ->> DigiTech FreqOut (feedback generator) ->> Boss LS-2 [A+B Mix <-> Bypass] (parallel effect loops mixer/switch) ={ [Loop A Send] ->> Monarch MFL-22 Stereo Flanger (sometimes stacked into the HoTone tremolo in front of it, and always mixed with either clean signal or the Behringer phaser from parallel effects [Loop B]) ->> HoTone Trem (tremolo, sometimes used with the Monarch Stereo Flanger behind it stacked into it, and always mixed with either clean signal, or sometimes the Behringer VP1 Vintage Phaser, from parallel effects [Loop B]) ->> [Loop A Return] ->|+|<- [Loop B Send] ->> Behringer VP1 Vintage Phaser (clone of the original big box EHX Small Stone phaser, used with Color switch engaged for deep sweep and high resonance/feedback, and always mixed with the Monarch MFL-22 Stereo Flanger from parallel effects [Loop A]) ->> [Loop B Return] ([Loop A] + [Loop B] mixed at an approximate 50/50 ratio) => [LS-2 Output] }=>->> Boss LS-2 [A+B Mix <-> Bypass] (parallel effect loops mixer/switch) ={ [Loop A Send] ->> Mosky Black Rat (RAT clone, in Turbo RAT, LED diode clipping, mode, quite raunchy, fuzz-esque, high gain distortion, always used mixed with the {Orange Juice -> Metal Zone} from parallel effects [Loop B]) ->> Behringer SF300 Super Fuzz (Boss FZ-2/Univox Superfuzz clone, octave fuzz, always mixed with either clean signal, or {Orange Juice -> Metal Zone}, from parallel effects [Loop B]) ->> [Loop A Return] ->|+|<- [Loop B Send] ->> Joyo Orange Juice (Orange amp like overdrive, dialed in to deliver a low gain overdrive, always used stacked into the Boss Metal Zone in front of it, and mixed with the Mosky Black RAT from parallel effects [Loop A]) ->> Boss MT-2 Metal Zone (distortion, dialed in at a rather moderate gain setting, always used with the Orange Juice behind it stacked into it, and always mixed with either the Mosky Black Rat, or sometimes the Behringer Super Fuzz, from parallel effects [Loop A]) ->> [Loop B Return] ([Loop A] + [Loop B] mixed at an approximate 50/50 ratio) => [LS-2 Output] }=>->> Zoom B1Xon (used predominantly as reverb unit, with various different reverb patches, including the always on {very subtle Plate Reverb -> subtle Spring Reverb} reverb patch that is part of my basic "clean" tone, and an extremely thick, lush reverb patch, used as a pad effect with volume swells from the build in expression pedal, though also used for a couple of additional effects, including a prominent "wah" pedal patch and a trippy reverse delay patch) ->> Danelectro Fab Metal (post reverb high gain distortion, often used stacked into the Orange Juice in front of it) ->> Joyo Orange Juice (post reverb medium gain distortion) ->> NUX Tape Core Deluxe (amazing digital emulation of the legendary Roland RE-201 Space Echo tape delay) ->> Behringer VD400 Vintage Delay (clone of the Boss DM-3 Analog Delay) ->> Boss LS-2 [A+B Mix <-> Bypass] (parallel effect loops mixer/switch) ={ [Loop A Send] ->> Joyo Oxford Sound (clone of the Tech 21 Oxford, which is an all analog emulation of an Orange Amp type preamp, always used blended with "clean" signal from parallel effects [Loop B]) ->> [Loop A Return] ->|+|<- [Loop B Send] ->> ([Loops B] empty, used to blend in "clean" signal) ->> [Loop B Return] ([Loop A] + [Loop B] mixed at an approximate 50/50 ratio) => [LS-2 Output] }=>->> NUX (NBP-5) Melvin Lee Davis Bass Preamp + DI  (loaded with a digitally emulated Aguilar Tone Hammer amp, and an Ampeg SVT-212AV IR cab simulation, with a subtle low gain overdrive blended in at a 50/50 clean/drive ratio) ->

 

->> ART Tube MP Project Series (tube preamp and DI, with build in HPF, fixed @40Hz -12dB/Oct, engaged, tube driven to just on the verge of breakup point->

 

// ->> Band rehearsal/jamming/gigging  // ->> Home practice // ->> Home recordings //  : 

 
// ->> Band rehearsal/jamming/gigging ->> Effects Return (poweramp input) of a Peavey Solo Special 112 (160W combo amp, with the build in speaker disconnect and instead hooked up to a passive PA speaker) ->> The Box PA 502 (passive full range flat frequency response PA speaker with 1x 15"  woofer/mids driver + 1.7" high frequency tweeter horn) // ->> Home practice  ->> The T.Mix Mix 502 (mixer) ->> Sennheiser HD 380 Pro (studio grade, that is FRFR, headphones) // ->> Home recordings ->> M-Audio Fast Track (audio interface) ->> Reaper (DAW) //

 

Link to comment
Share on other sites

6 hours ago, Pea Turgh said:

Got the P2 recently.  Had the tuner for donkeys, and the in-ears for a couple.


Can’t wait to give this a shot!

IMG_7815.jpeg

We use p1s. What are the advantages of the p2s please?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...