For Sale or trade my US Lakland Classic 44-64 with Geezer EMG Pups.
I purchased this second hand from guitar guitar, it's in very good condition. The Lakland US necks really do feel as good as people say, this one is 43.60mm at the nut and has an alder body with maple board.
EMG's GZR's certainly seem an upgrade to me for power and clarity but also included are the original Lakland pups and loom. Comes with mint, perloid & black scratch plates, the bevel on the mint is less than perfect (didn't know my OCD was this bad) so I had a black one made by Sims guitars who did a great job. Now they have a CAD file for the guard you can get a discount should you wish to have a further guards made up (Tort??).
Weight on kitchen scales is 3897g and I was quoted 3.8KG by the shop so pretty sure that's the ballpark.
The overall condition is very good, going over it with a fine toothed comb I have spotted a couple of tiny sub 1mm blemishes on the body but only visible at 'that' one angle and can't really get a pic of them, attempt with finger below. The neck looks and feels flawless. I will try and get some better over all pics but just getting reflections at the moment.
Original Lakland hard case included so shipping is possible if fully insured. Meet or collection following appropriate guidelines preferred though.
Trades wise, for a keeper it is likely to be: 4 string, under 4Kg weight, sub 42mm at the nut and back of the neck would be blemish free to the touch. Happy to listen to alternative trade offers and could add cash for the right instrument.
NEW PRICE £5999
A Fodera Monarch Deluxe made in October 2014, in stunning condition with deluxe case.
Featuring the same tone wood and pickup combination as the Victor Wooten Classic: A Mahogany body, Indian Rosewood fingerboard, and EMG P/J’s. "This bass delivers a rich, articulate tone with deep, warm lows, clear, bell-like highs, and an overall modern vibe".
This bass also features a dark Buckeye Burl top with lost of dark, intricate figure, as well as tulip inlays at the 12th and 24th frets!
• Mahogany Body
• No Tone Block
• Buckeye Burl Top (Solid)
• Indian Rosewood Fingerboard
• 3-pc. Hard Rock Maple
• Mother-of-Pearl Dot Inlays w/ Tulips on 12th and 24th frets
• Birth Date - October 2014
• Dovetail Construction
• 34" Scale Length
• 4 String Configuration (19.0mm Spacing)
• 24 Frets (Large)
• Fodera / Pope Custom 3-Band Preamp
• EMG P / J Pickups
• Monarch Control Layout
Great conditions, early series with noiseless pickup.. 2006/2008.. good sound and playability
new DR pure blues strings
i can consider trades with more expensive 5 strings basses even with cash to your side.
shipping to evaluate for all Europe
OmniCabSim Deluxe: £160
Tweakable cabinet simulator and DI (with aux in, headphone out with separate volume control, balanced XLR, ground lift, and 1/4 'through' and 'output').
Perfect working order, very good condition, boxed.
RRP £259, and being from Chile with only one UK distributor that is out of stock these aren't the easiest things to get hold of.
Postage via special delivery £7, or collection from Twickenham.
My seller feedback is here: https://www.basschat.co.uk/topic/446834-feedback-for-sumone/
Will consider a trade/part exchange for an amp head, ideally >300w with FX loop, aux in, headphone out, XLR out. Something like the Ashdown RM 300 or 500.
Info from: https://www.dsmnoisemaker.com/omnicabsim-deluxe/yh0m9
A cabinet simulator is a device designed to emulate the frequency response of a speaker system. Guitar and bass speaker systems have a very pronounced filtering effect, rolling off the low and high frequencies very sharply due to their physical and electrical properties. Things like cone size, material, impedance, enclosure size and type, even distance from a wall, affect these filters very noticeably.
The Philosophy behind the design is to allow the user to CREATE their own cabinet response settings, moving away from the typical preset cabinet simulators in the market. This approach let the musician to define his own sound and getting an accurate reproduction of it when recording and playing live gigs, without depending on mic placement, amplifier or cabinet availability..Just dial in your favorite tone, tune your cabinet response and go straight to the PA or recording gear!!
Mic and Line output. Compensate levels with the gain control.
Tunable high frequency response emulates the steep low pass filter that different speakers produce.
Tunable Low frequency response that controls the low end roll off typical of speaker of various sizes.
Tunable low frequency resonance lets you dial the resonance of the low end roll off point, reproducing the effect of closed or open back cabinets, and anything in between.
Mid control lets you dial “modern” or “vintage” responses.
Punch control boosts the 800 Hz band, that lets you cut through the mix with warmth.