moley6knipe Posted June 9, 2021 Share Posted June 9, 2021 I like the angst! 😝 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted June 9, 2021 Share Posted June 9, 2021 11 minutes ago, moley6knipe said: I like the angst! 😝 Ah, you are SA's core target market then 😂 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 9, 2021 Share Posted June 9, 2021 1 hour ago, SumOne said: Yeah I don't blame you for waiting. Something else I've found is that the scrolling through the named presets automatically turns the C4 on which might not always be ideal (but can be turned off if holding the left button down before scrolling through in the device number Preset menu). There's probably a solution buried in youtube videos/manuals/menus somewhere but my patience and motivation is wearing thin! It's these sort of hassles that a few month ago would have me returning these pedals (I had already owned a C4 and returned it). I think (hope) it'll be worth it in the end though, the C4 does make some excellent sounds and it's worth having an additional controller to access them. If you are recalling presets using PC messages over the C4’s USB port then the preset will be loaded in the state stored in the preset. If you want them to load in the bypass state, you’ll need to edit each preset and change the “engage/bypass state upon load” function and resave them. 58 minutes ago, moley6knipe said: you can’t change presets on a C4 using Program Change MIDI messages That’s not true - if you’re using MIDI over USB then you can send PC messages to the C4 via its USB port to directly access its internal presets. 2 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 9, 2021 Share Posted June 9, 2021 47 minutes ago, Al Krow said: Or am I just being too old fashioned? No, just old and evidently of poor memory; we’ve already had this conversation. 😉 1 Quote Link to comment Share on other sites More sharing options...
Al Krow Posted June 9, 2021 Share Posted June 9, 2021 26 minutes ago, Quatschmacher said: No, just old and evidently of poor memory; we’ve already had this conversation. 😉 I don't recall having it on this thread...but as you say I'm old and of poor memory 😂 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 9, 2021 Share Posted June 9, 2021 1 hour ago, Al Krow said: I don't recall having it on this thread...but as you say I'm old and of poor memory 😂 No, it was in a smaller group chat. Quote Link to comment Share on other sites More sharing options...
moley6knipe Posted June 9, 2021 Share Posted June 9, 2021 8 hours ago, Quatschmacher said: That’s not true - if you’re using MIDI over USB then you can send PC messages to the C4 via its USB port to directly access its internal presets. I stand corrected, my bad! Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 10, 2021 Share Posted June 10, 2021 Bass Indirect have admitted they never had the hub in stock when they took my money. Ah well maybe next week. Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 11, 2021 Share Posted June 11, 2021 Well I ought to show a little more faith... 3 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 11, 2021 Share Posted June 11, 2021 5 minutes ago, stewblack said: Well I ought to show a little more faith... Make sure you update its firmware to 1.20 to get the best from the UW. Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 11, 2021 Share Posted June 11, 2021 1 hour ago, Quatschmacher said: Make sure you update its firmware to 1.20 to get the best from the UW. I did that. Got all pedals hooked up and accessed all bar one on the neuro editor. Now need to suss how to use my midi pedal to scroll the scenes Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 11, 2021 Share Posted June 11, 2021 3 minutes ago, stewblack said: I did that. Got all pedals hooked up and accessed all bar one on the neuro editor. Now need to suss how to use my midi pedal to scroll the scenes That’s pretty straightforward. Just send PC messages to the hub once you’ve saved some scenes to the hub. Just remember that the Hub goes 1-128 so if your controller has a display offset option, you should engage that. 1 Quote Link to comment Share on other sites More sharing options...
SumOne Posted June 12, 2021 Share Posted June 12, 2021 Source Audio Multi FX would be a winner: Aftershock + Gemini + C4 + EQ + Collider + Ultrawave + interface like Helix Effects = take my money! 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 12, 2021 Share Posted June 12, 2021 14 minutes ago, SumOne said: Source Audio Multi FX would be a winner: Aftershock + Gemini + C4 + EQ + Collider + Ultrawave + interface like Helix Effects = take my money! It’s pretty unlikely; they are very invested in their separates idea. 2 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 12, 2021 Share Posted June 12, 2021 16 hours ago, Quatschmacher said: That’s pretty straightforward. Just send PC messages to the hub once you’ve saved some scenes to the hub. Just remember that the Hub goes 1-128 so if your controller has a display offset option, you should engage that. Unfortunately I don't understand how to do these things. I believe I understand what you mean, but I need to research the midi controller. Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 12, 2021 Share Posted June 12, 2021 25 minutes ago, stewblack said: Unfortunately I don't understand how to do these things. I believe I understand what you mean, but I need to research the midi controller. MIDI parameters go from 0-127 (including PC messages). Having a preset 0 is a bit weird so several companies lost their presets as going from 1-128 (though in the background they still are still responding to 0-127 so will be off by 1). For these reason, some controllers offer the option to offset the display by 1 to match. What controller are you using? DMC micro? Quote Link to comment Share on other sites More sharing options...
lee650 Posted June 12, 2021 Share Posted June 12, 2021 1 hour ago, SumOne said: Source Audio Multi FX would be a winner: Aftershock + Gemini + C4 + EQ + Collider + Ultrawave + interface like Helix Effects = take my money! Sounds amazing! How ridiculously expensive would that be😂 it's not their business model though, I love the seperate multi effect thing that they do. Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 12, 2021 Share Posted June 12, 2021 1 hour ago, Quatschmacher said: MIDI parameters go from 0-127 (including PC messages). Having a preset 0 is a bit weird so several companies lost their presets as going from 1-128 (though in the background they still are still responding to 0-127 so will be off by 1). For these reason, some controllers offer the option to offset the display by 1 to match. What controller are you using? DMC micro? Gecko Mkiii by One Control. The manual is brief and not easy for me and the only video tutorial I found is in German! Meon Deutsch ist nicht so gut unfortunately. I will get there, but I won't rush it. Ultimately I want to use it to control both the TCE Plethora and the neuro hub - but that's way down the line. Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 12, 2021 Share Posted June 12, 2021 (edited) 27 minutes ago, stewblack said: Gecko Mkiii by One Control. The manual is brief and not easy for me and the only video tutorial I found is in German! Meon Deutsch ist nicht so gut unfortunately. I will get there, but I won't rush it. Ultimately I want to use it to control both the TCE Plethora and the neuro hub - but that's way down the line. Send me a link to the video - I’m fluent so could see if they mention it. Also, there may be captions if you turn them on. Edited June 12, 2021 by Quatschmacher 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 12, 2021 Share Posted June 12, 2021 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 12, 2021 Share Posted June 12, 2021 (edited) 9 minutes ago, stewblack said: Already figured it was that one and watched it. Seems he hasn’t worked out if there’s an offset - at the end of the video with the looper he mentions it as a problem and asks if anyone has a solution. I’ve looked at the manual and there isn’t anything to suggest that this option is present. Could be worth emailing to ask if they can add it as a firmware update. Edited June 12, 2021 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 12, 2021 Share Posted June 12, 2021 OK thank you @Quatschmacher - I have it all up and running. I'm scrolling up and down through presets, editing and saving scenes both on the Neuro desktop and on the hub and pedals, so I am very happy with my morning's work! 1 Quote Link to comment Share on other sites More sharing options...
SumOne Posted June 12, 2021 Share Posted June 12, 2021 Is there an easy way to move around preset numbers on the Neuro Editor? The only way I seem to be able to do it is open then and save into a different number then erase the original. Quote Link to comment Share on other sites More sharing options...
moley6knipe Posted June 12, 2021 Share Posted June 12, 2021 That’s the method unfortunately 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 12, 2021 Share Posted June 12, 2021 15 minutes ago, SumOne said: Is there an easy way to move around preset numbers on the Neuro Editor? The only way I seem to be able to do it is open then and save into a different number then erase the original. This is a bit of a pain. Drag and drop would be a major step forward with the preset which is being replaced moving whence it's replacement came. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.