Jump to content
Why become a member? ×

Custom Shecter 004. WITHDRAWN
£245


hamfist
 Share

Recommended Posts


SORRY WITHDRAWN.

OK, I'll admit it, to start with. I'm addicted to buying basses, pimping them and then selling them on. I can't for the life of me understand why I'm selling this, but I just want to move on to new basses to tweak/alter/pimp etc etc.

It's a Schecter 004, about 10 years old. It was the pre-cursor model to the Stargazer, except with slight tweaks to the build quality. Things like a different bridge and a brass nut. Pretty minimal differences really.

The 004 has ....

5-bolt-on construction
34" scale
Ash body
Maple neck
maple fingerboard
Brass nut
24 Jumbo frets
Block Inlays
Creme binding
Schecter tuners
Chrome hardware w/ brass nut

I have removed the Schecter electronics and replaced with An EMG 35P4 (neck) and an EMG 35DC (bridge). It will also come with a spare EMG 35P4 which gives a different flavour in the bridge position. Connections are all EMG quick connect so no soldering to do.

Other additions are the rather snazzy Union Jack pickguard. The bass will also come with an identical white pickuguard, to give you a different look.

The Schecter bridge has been replaced with a Matsumoku high mass cast bridge, which gave a significant increase in "punch" and attack compared to the (rather average) Schecter bridge.

The neck is Jazz style , slim with a 38mm nut, and plays beautifully. Straight and with no issues. The brass nut has been set up, with the slots filed to perfection. The tuners are Schecter's own, but are decent.

Also comes with a set of four hand-made ebony knobs. The controls are simply Vol,Vol,Tone at the moment. The 4th knob and pot are just a dummy lot to fill the hole. The control cavity is a good size though and one could easily fit even quite a large pre-amp in there if you fancy. I had an EMG BQC control preamp in there with plenty of room to spare at one point.

My impression of the bass was that Schecter used high quality woods and general construction but saved some money on a lot of the hardware (which has of course been mainly replaced on this one).
I have played a Stargazer and was severely underwhelmed. This 004, however, is a MONSTER. Great even tone, all over the neck. Clean, modern, punchy. It's a pleasure to play. I can't imagine anyone being disappointed with this one.

The gloss black finish is still in really good nick. There are some light scratches around (as it is a 10 year old bass which has been played) but these are mostly on the rear and cannot be seen unless you look closely. Please be aware that it was spitting very gently during the photoshoot and any spots you see on the paintwork will actually be raindrops.
Fretwork is very good, with minimal wear.

Price is £235 if you collect from me in the Southampton area. Or £255 couriered within mainland UK including a good padded case.

Right, pics .....

[url="http://www.ephotobay.com/share/004-front-body-a.html"][/url]
[url="http://www.ephotobay.com/share/004-main.html"][/url]
[url="http://www.ephotobay.com/share/004-front-body-b.html"][/url]
[url="http://www.ephotobay.com/share/004-hstock-front.html"][/url]
[url="http://www.ephotobay.com/share/004-hstock-rear.html"][/url]
[url="http://www.ephotobay.com/share/004-neck-front.html"][/url]
[url="http://www.ephotobay.com/share/004-neck-rear.html"][/url]
[url="http://www.ephotobay.com/share/004-rear.html"][/url] Edited by hamfist
Link to comment
Share on other sites

[quote name='hoiho' timestamp='1391101699' post='2353302']
Do you have a picture with the white pickguard on? And I presume the dark/light shanve on the back of the neck is a scarf joint, not scraped back to bare wood neck, like on a double bass?
[/quote]

Pic with white pickguard below.

And, yes that bit on the back of the neck is how it came out of the factory. Is that called a scarf joint ?

[url=http://www.ephotobay.com/share/004-white-pg.html][/url]

[quote name='silentbob' timestamp='1391091485' post='2353141']
Are you after any trades or just a straight sale?
[/quote]

Not looking for trades really, but might possibly be interested in a cheap interesting bass I could do up, in part exchange.

Link to comment
Share on other sites

[quote name='hoiho' timestamp='1391109957' post='2353449']
Another question! Is the new bridge still through-the-body strung, or it is end-loaded?
[/quote]

Yes, you can still string-through with the replacement bridge if you want. I have to say that, with this bass, I think it feels much nicer not strung-through though.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...