Twigman Posted June 24, 2013 Share Posted June 24, 2013 Making a Nano based board (tuner+chorus+compressor is all I need) for the fly away gigs - the PT Junior is just too big for my hand luggage. I have a Nano on order so have not been able to measure it. What power supplies will fit under the board of a PT Nano? Quote Link to comment Share on other sites More sharing options...
steve Posted June 24, 2013 Share Posted June 24, 2013 I used this one with a nano [url="http://www.gak.co.uk/en/diago-ps10-micropower9-pedalboard-power-supply/53929?gclid=CPbbg4LW_LcCFeTLtAodciwAYA"]http://www.gak.co.uk/en/diago-ps10-micropower9-pedalboard-power-supply/53929?gclid=CPbbg4LW_LcCFeTLtAodciwAYA[/url] Quote Link to comment Share on other sites More sharing options...
HazBeen Posted June 24, 2013 Share Posted June 24, 2013 The nano is very small and very low, not much will fit below. I went with a OneSpot + daisy chain in the end. Quote Link to comment Share on other sites More sharing options...
plunkrock Posted June 24, 2013 Share Posted June 24, 2013 I'm daisy chain-ing it as well, no issues but not using anything that needs too much juice. Quote Link to comment Share on other sites More sharing options...
Twigman Posted June 24, 2013 Author Share Posted June 24, 2013 (edited) I don't want to daisy chain it. I'd like isolated supplies. On my PT Jr I use a T-rex Chameleon but I'm certain that would be too big for the Nano. I understand the FT Junior will fit with a little modding (shaving the right angle connectors) but I don't really want to mod.... Anyone used a Gigrig generator? I think that would fit without any mods. How many 9V outputs does it have? Would I need a Gigrig distributor too? Edited June 24, 2013 by Twigman Quote Link to comment Share on other sites More sharing options...
Happy Jack Posted June 24, 2013 Share Posted June 24, 2013 [quote name='Twigman' timestamp='1372088771' post='2121408'] I don't want to daisy chain it. I'd like isolated supplies. [/quote] I suspect you're going to struggle with that. I've tried using my Nano in a variety of ways. Daisy-chaining is OK, but frankly it's so small that it's WAY more effective & neater if you use either battery-powered pedals, or something that can use phantom power from the PA. Quote Link to comment Share on other sites More sharing options...
umcoo Posted June 24, 2013 Share Posted June 24, 2013 Not isolated, but Pedaltrain are due to come out with the Volto - a rechargable power supply designed to fit under the Nano and Mini boards. It's been on the cards for ages and no release date yet. [url="http://pedaltrain.com/products/power/volto.php"]http://pedaltrain.com/products/power/volto.php[/url] Quote Link to comment Share on other sites More sharing options...
Guest FretNoMore Posted June 24, 2013 Share Posted June 24, 2013 I'm voting for 1Spot - quite small, and quite powerful. Quote Link to comment Share on other sites More sharing options...
umcoo Posted June 24, 2013 Share Posted June 24, 2013 Forgot to say, I use a Diago Micropower with mine Quote Link to comment Share on other sites More sharing options...
LiamPodmore Posted June 24, 2013 Share Posted June 24, 2013 If i stick with my Nano i'll be strapping a Diago MicroPower9 under it. I think the GigRig stuff would fit but it's excessive for such a tin board. Liam Quote Link to comment Share on other sites More sharing options...
sk8 Posted June 25, 2013 Share Posted June 25, 2013 (edited) http://www.thomann.de/gb/sanyo_eneloop_pedal_juice.htm No experience but appears to be the same idea as the volto with more Ma although it may be two big on second thoughts! Edited June 25, 2013 by sk8 Quote Link to comment Share on other sites More sharing options...
Twigman Posted June 25, 2013 Author Share Posted June 25, 2013 [quote name='sk8' timestamp='1372160051' post='2122267'] [url="http://www.thomann.de/gb/sanyo_eneloop_pedal_juice.htm"]http://www.thomann.d...pedal_juice.htm[/url] No experience but appears to be the same idea as the volto with more Ma [/quote] That is too big to fit under the nano @ 43mm thick Quote Link to comment Share on other sites More sharing options...
sk8 Posted June 25, 2013 Share Posted June 25, 2013 [quote name='Twigman' timestamp='1372160203' post='2122273'] That is too big to fit under the nano @ 43mm thick [/quote] Yeah I realised that after posting it Quote Link to comment Share on other sites More sharing options...
Guest FretNoMore Posted June 25, 2013 Share Posted June 25, 2013 I've seen some put slightly taller feet on their boards to make room underneath. Maybe an option. Quote Link to comment Share on other sites More sharing options...
Twigman Posted June 25, 2013 Author Share Posted June 25, 2013 ...just bought some 5mm Jack nuts, some M5 allen head bolts, some 25mm rubber cabinet feet and some 32mm cabinet feet Quote Link to comment Share on other sites More sharing options...
BigBeatNut Posted June 26, 2013 Share Posted June 26, 2013 These two are both called power supplies, but I'm fairly sure that they're both merely isolation units providing many 9V outs, for a single 9V in, from another power supply that's bigger than the unit pictured (and may or may not be included). If it's isolation you want, these may be part of the answer. [url="http://www.amazon.com/One-Control-Micro-Distro-Supply/dp/B00AKGQ238"]http://www.amazon.com/One-Control-Micro-Distro-Supply/dp/B00AKGQ238[/url] [url="http://www.loopersparadise.de/en/pro.php?p=712"]http://www.loopersparadise.de/en/pro.php?p=712[/url] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.