fryer
-
Posts
505 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by fryer
-
In what way is it not suitable ? Sorry, I don't understand these things. And what driver should I go for ? I am pairing it with an ATS S 310x2, which has a 10" driver plus a passive speaker, rated at 500w at 8 ohm.
-
thanks. If I'm using 20 mm ply, I guess I won't need to brace it ?
-
So I may not get the 400 w out of it, but I am going to proceed anyway. I have decided the size, and how to make it. I have asked Mr Fleabag to add some comments, as I have just read his 15" speaker cab build. I tried Bill F, but no reply. I will need help with sourcing 'tuff cab' & edge protection later. Where can I get the ports ? I can do a diary if that's normal ?
-
Dear Mr Bag. I have just read this post with much interest, and congratulate you on your build. I started a post recently - 'cabinet build - from scratch'. Could you please look at that, and maybe help me with some answers ? Richard
-
thanks for finding that. I found the spec sheet, but couldn't find anything about a cab for it. But it's a 400 w speaker ?
-
Thank you. I'll try him.
-
How ?
-
So a few years ago I bought an Eminence Delta 12A, 400 w at 8 ohm, and made a box for it, as shown. Never used it, so thought I would now build a proper cab for it. I have some 20 mm ply, and the size I need it to be. It's gonna be vented, and I've asked Eminence for their recommendations on this. I am seeking suggestions for covering, and grille material.
-
Or I could deliver, or arrange delivery, depending on location. -
SA 141 bass multiwave pro - £95. SA 121 - tri mod wah - £45. Both unused and unmarked -
is this still for sale ? How old is it ? Why are you selling it ? 4 or 8 ohm ? -
It's good so far. Still trying different settings
-
How important is the band name for you?
fryer replied to Barking Spiders's topic in General Discussion
I still like 'XTC' -
1st is a Gretsh ( for sale ) 2nd is a Hagstrom HB 8 - sounds lovely, easy to play, but heavy 3rd is my 1963 Framus Star Bass - 30 1/2" - played it for years as a teenager 4th is a Hagstrom HB 4 - not quite as heavy as it was 5th is a Steinberger - now 31" scale - cut 2 frets off the top
-
Just ordered one - should arrive today. Anyone got one ? What's it like ?
-
it just kept clipping when feeding one 500 w cab. Have returned it.
-
looks lovely out in the sunshine -
what a lovely day for getting the 410 out in the garden and serenading the neighbours.
-
Not sure if I'm allowed to advertise, but my Glock 410 is in the for sale section
-
For Sale - EBS Reidmar 750 with RM 4 footswitch. Current new cost is around £580 plus £75 for the RM4. In as new condition with no marks. Approx. 18 months old and used for maybe 10 gigs plus practising at home. Selling for £460, as I no longer use it. FEATURES Type: Analog Preamp, D-Class Power Amp Built-in adjustable Compressor/Limiter Extremely Powerful 4-band EQ Drive Control Effects loop Character filter. Balanced XLR-Out with Pre/Post EQ switch and Ground Lift. Line and Headphones Out Remote Output for connecting EBS RM-4 footswitch to control Character Filter, Drive, EQ bypass and Mute funtction Output Power: 750 W @ 4 Ohms 120/230 V Switchable EBS Reidmar 750 Input Impedance 1 Mohms / 100 pF Gain Range -00 - +30 dB Character Filter Shelving, High/Low Pass, +7 dB @ 40 Hz, -2 dB @ 800 Hz,+3 dB @ 10 kHz Tone Controls, Bass Shelving +/-18 dB @ 60 Hz Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB Treble Shelving +/-18 dB @ 6 kHz Bright Shelving +15/-0 dB @ 10 kHz Drive min/max 0/34 dB Balanced Output -10 dBv, Pre/Post EQ, GND Lift Remotes Output Remote Jack RING = Mute / TIP = Drive Filter Jack RING = Filter Mode / TIP = Character Output Power 700 W RMS @ 4 ohms load (350 W RMS @ 8 ohms) Dimensions (WxDxH) 15.2 x 10.4 x 3.0” (38.5 x 26.5 x 7.5 cm) Weight 3.7 kg (8.2 lbs.)
-
With one 8 ohm cab you only get 130 w. To get the 200 w out of it, you need two 8 ohm cabs. Doesn't that defeat the object of going small ?
-
Never heard of them before, but the reviews are good. Could I have a look / listen ? I could call in on my way home from work. -
that's good to know, thanks. Which cabs are you using ?
-
I've got it and tried it, and it seams as though it will be ok. Obviously can't tell till next rehearsal. It's so small I was worried about it flying around on the end of the lead, but luckily it is heavier than it looks.
-
Just ordered one - should arrive tomorrow. I want something small to take to rehearsals. Will be using with a Purple Chilli 1 x 12 cab. Cab is 8 ohm, so should get 130 w from the amp. Will this be loud enough ? I normally use a Reidmar 750 with 4 x 10 cab for gigs.