Boodang

You guys should start a new topic 'how good, or not, am I at learning covers' and slog it out over there! At this rate bubinga5 will be put off joining any covers band for life.

I'm sure if you have the talent there's an audience for a Rush tribute band! But as always you have to be happy, at some level, with what you're playing and the gigs you are doing.

I love the way basschat threads go off topic quite quickly! We go from 'pros/cons' of playing in a covers band where you don't like all the songs, to how to enjoy playing in said band (still relevant), to how to learn songs (not very relevant). PS as we're off topic, if you want a covers band that'll challenge you, do jazz standards, and there's an audience for it.

Due to necessity (remote part of the world) found myself in a covers band the other year where every song we played I genuinely hated. Not a problem though as the audience didn't and it was great fun. Even learnt some great bass lines I wouldn't have otherwise.

Drummers and their kick drums! Went to see my daughter's drum teacher play in his band, everytime he hit the kick it was like a grenade going off! It's quite ironic really that modern PA systems finally give us the power we need for bass frequencies but it often gets abused like it's a new toy in the box.

Mackie DLM12. I play a Jazz fretless in much the same way with lots of melodic lines. Did some gigs abroad playing folk orientated music and got given the Mackie to play through. I eq my bass through pedals so don't need amp eq and the Mackie was perfect as it's quite neutral and plenty loud enough in the folk setting. And if you need more volume you can always add the subwoofer but haven't tried that setup yet.

Yep that's synthetic cores for you. I've got Obligato's on my upright and it's the same, takes a day or two to settle in.

Check out Creamery pickups (in Manchester I think). He does various jazz and precision winds, I got a 70s P from him and it's awesome, plus a pair of jazz custom made to my specs. He's v helpful, I'm sure he'll rewind your p pickup to your specs. Can't recommend highly enough.

EQ; unless you've got big folded bins your bass cab, no matter what it's loaded with, will start to roll off significantly below 100hz. Consequently perceived bass out in the audience is more defined around eq'ing the 80/100hz area and definition of your notes eq'ing the mid range area. I had an SWR Silverado combo once, the 4 x 8 version. Dreadful sound on its own but cut through in the live situation really well and in the band context had a great sound. In contrast had a Trace Elliot 300 watt 1 x 15 combo which was plenty loud and sounded great on its own but was always fighting boominess in small venues. In terms of being heard and controlling tone, have had the best success with 4 x 10 cabs. But it's different for every player of course.

... or natural if the wood is good enough.

Sunburst with tortoiseshell. Got a tort control plate for my fretless as I like it so much.

Yeah, Billy Cobham, Chick Corea, Tribal Tech etc... how disappointing can it get!!!!!!

On the groove front: Victor Bailey - Sweet tooth Lenny White - Wolfbane Pleasure - Joyous Not forgetting anything by Medeski Martin & Wood, plus the entire Billy Cobham backlog.

On the groove side of fusion... Bennie Maupin. 'It remains to be seen' from the Slow Traffic to Right album. Very 70s but always ripe for a modern interpretation.

Has presets for bagpipes, sitar and even a Rameau temperament amongst other things.... but no harp!

Peterson strobo clip. Works on everything, double bass, eub, bass guitar, guitar and low Bs. Also has 'presets' that are optimised for different instruments, upshot of which it works perfectly.

... I don't think the ins and out of YouTube compression has ever influenced my decision on a compressor pedal for my bass!

Sorry for the shameless plug but.... there's a Source Audio Bass Envelope Filter pro in the 'effects for sale' section for £100. A sort of early and basic version of the Spectrum (only does envelope sounds) but with lots of knobs for manual twiddling rather than being computer programmable.

There's a good YouTube video from Andertons where they compare various compressors, they get to the most expensive one and can't hear much difference commenting 'is it a good thing or bad thing that it's so transparent'! Having said all that, a decent compressor is the one pedal I wouldn't be without on my board.

Thanks, I'll check out the profile of my hex screws. This could be the issue as so far any string I clamp the windings break open when I apply tension, which probably means they are are getting crushed by the screw when clamping. I'll experiment and get back.

I mostly play fretless and EUB and have been experimenting with compressor options myself recently. It depends on whether you want something that you're going to change settings on during a set or if it's a 'set it & forget it' type, but this recommendation is for the latter; a TC Electronic Spectracomp. I was surprised by how well it sounded and now it's always on. The main reason for this is the toneprint presets you can download. Tried them all and found the Nathan East settings to be spot on. The Spectracomp is a 3 band compressor and what I love about the toneprints is that someone who knows what they are doing has effectively programmed it for you and there's enough to find one to suit.... provided it's a set and forget thing you're after. And the bonus is it's not expensive.

Good point. How light, or hard, you play must be a factor, and as you say there are plenty of players out there with bent wrist technique. However, as far as what could be called 'good technique', if I'm teaching a beginner, I certainly would be showing them to play with a straight wrist.

Also to consider; the more windings on a pickup the narrower it's frequency response. Hence the idea behind active pickups is to have fewer windings but this makes for a very low voltage output. To make up for this a preamp is built in to add gain (hence the need for batteries). This has three effects, the output will be buffered (so you can't for instance put 2 active p/u's in series), it will have a low impedance output (normally 600 ohms) courtesy of the opamp used and because they need magnets that are not as strong as passive p/u's they have less pull on the strings. Passive pickups normally have an impedence of 10k ohms, will have a narrower frequency response (but this will normally be a tailored response so not necessarily a bad thing) and because it's basically just wire wrapped around magnets is not buffered. A lot of people do not like the bright, clinical response of active p/u's but in my experience they just need a lot of eq'ing, whereas passive p/u's have a more 'organic' tone mostly because of their tailored response.

So, how to make a headless bass take normal strings? I had a Sei bass made back in the 90s and it seemed a good idea at the time for it to be headless... all the rage then. But, as quick as string changes can be, it really only takes double ball end strings which rather limits choice... to such an extent that I can't put on my now favourite nylon strings. Aha you say, just use the clamping system at the nut to use any string you like. Except most strings, especially nylon, unravel if you try to put tuning tension on them before the silk windings (I have an extensive list of strings that can't be clamped and cut before the wrap). Apparently the bass can't be made headed (I've asked Sei and various luthiers), and yes I could and have bought another bass that's not headless, but I love this bass, it plays like nothing else, and I want a way to put on normal strings without clamping/cutting them, but so far haven't figured out how. What's needed is some hardware to replace the tuners at the body end that can take the entirety of a normal string... but so far can't see anything out there. Anybody have any suggestions?! PS the hardware is from the German company ABM and 5 string.

Some of the sharp angles you see! And yes, asking for RSI. To a certain extent you can understand it when you haven't been taught otherwise as resting your forearm on the body of the bass is comfortable but ultimately leads to this issue. Worse, is when someone is teaching bass (think particularly YouTube) and plays with a bent wrist. As you say, it'll be further down the line that problems occur which can be quite severe.