MartinB

Those are some hairstyles 😆

Single band parametric EQ? Sine Effect Electronics do a very space-efficient one

Nice! 80% of the sound, 20% of the price.

Yep, looks the same to me. The switch itself takes very little pressure to activate - I'm guessing they just went a bit too far in trying to making it hard to accidentally switch off while sweeping the pedal.

My G1Xon and B1Xon have the same notch in the rubber pad - you have to really lean on the expression pedal to switch it on/off

There just aren't that many "standard" sized pedals with a DI - pretty much every pre-amp+DI on the market is a big box. The best M81 alternative I can think of is a Broughton Audio Messenger Jr, but good luck finding one A couple of things to consider: - Have you got room for a micro DI box tucked under the board? Or could you sit the pre-amp pedal on top of a fairly flat DI box? The extra height might not be an issue if you're not switching it on and off all the time - Do you definitely need a pre-amp, i.e. something that boosts your signal from instrument level to line level so that it can drive a power amp? If you're just after clean EQ and you can squeeze in a separate DI box, there are all kinds of great options available to you.

-- https://guitar.com/features/interviews/sunn-ceo-james-lebihan-relaunch-brand-model-t-irs-modelling-amplifiers/

Yep - the nickels are listed as fairly normal tension, but the stainless steels are much higher (except for the G)

Not cool for an originals band

Still enjoying this pedal a lot! I've got it dialled in nicely now, and I'm using it weekly with IEMs for ampless rehearsals. Here's me attempting to remember a bassline that I learned about 25 years ago: Laney DB-PRE.mp3 PJ bass - P pickup only - tone rolled off a bit - plectrum Little bit of 4:1 compression in front from a Keeley Bassist DB-PRE settings: bass 7 - lo-mid 2 (switch down, so ~700Hz) - hi-mid 7 - tube channel - drive 6 And the bypassed signal, for comparison: DI.mp3

I see these are the stock strings for Solar guitars & basses, so it's safe to assume they're good for metal 🤘 I'm curious about the Blacksmith stainless steel strings, as the listed tension for the E and B is unusually high for roundwounds at 55lbs - could be good for drop tuning. Not willing to risk the money on what's probably a misprint though!

Nice! My Rumble has the same problem - I'm guessing that if surgical spirit worked, then meths will also do the trick Update: Works a treat! They don't need to soak for long

There's a build-it-yourself always-on -12dB/oct (equivalent to the Broughton) if you're handy with a soldering iron: https://www.musikding.de/MINI-HP-VONG-filter-kit

That Boss looks absolutely minuscule in comparison! 🔍

I think this is what they're getting at with the name: Standard guitar E A D G B E 7-string guitar B E A D G B E Baritone guitar B E A D G B Standard bass E A D G 5-string bass B E A D G "Baritone" bass B E A D i.e. it comes with 65-130 strings, it's designed to be played a 5th lower than your usual 4-string. In the absence of a standard term for this, they've come up with something that sort-of makes sense... if you try not to think about the normal meaning of "baritone" 😆

Haven't tried them, but IIRC I've seen good reports on here about Maida Vale: https://reverb.com/uk/item/44712241-maydevale-b-1p-low-rider-alnico-4-p-bass-pickup 4-conductor wiring, in case you want to get fancy with series/parallel etc.

Resistors can go either way round. Only eletrolytic capacitors have a direction, but at 0.02uF you won't be using one of those. One end of the 4.7k resistor is connected to ground, so it's no big deal if that end touches the shielding (since that should also be grounded). Heatshrink or insulating tape should do the trick if you're worried about bare wires elsewhere.

It says in the FAQs: So far it's all just reissues of the heritage stuff, but I'm guessing they'll be releasing a pedal-format amp sim at some point - along the lines of the Ampeg SGT-DI. They'd be daft not to!

"You don't clap me when I come out t'pit, so I'm not gonna clap you" 🤣

I had a Mini-HP-Vong from them in February, and delivery was €4.90 - nothing extra to pay

Not all effects are pedals Not all pedals are effects Not all effects make spaceship noises

You can stick the electronics in a pedal, a rack unit, a head, or a combo and they'll still do the same thing. So nothing happened to "bass - lead - amp" - it's just one of many ways to achieve the same thing. We each get to choose the one that suits ourselves best.

The Digbeth pre-amp sounds great and is really versatile, so if the heads are the same but louder then I bet they're superb!

Yeah, probably best to get in touch with Ironstone. I had the same thing happen with a brand new bass, and the manufacturer sent me a replacement pickup (which fixed it).