kodiakblair

I'd go with them over the other type, mainly due to the female sockets dangling loose; one snag and you'll be unplugged. If you're worried they might break, buy spares. Only 97p each from Kenable 👍 https://www.kenable.co.uk/en/audio-/audio-connectors/audio-adapters/3272-635mm-mono-jack-plug-to-twin-635mm-mono-jack-socket-splitter-adapter-003272-5055383432721.html

Most of the complaints I read were folk opting to blame Overlord instead of their ham-fisted attempts at installation. Have had no problems with mine, installation was a POP compared to the ABM mono saddles 👍

The Warman split coil Ps have ceramic magnets. Now I'm by no means a magnet snob, Josi's Jazzbar and Drivetrain both use ceramic mags and I'm happy with those in a couple of basses; it's just I find ceramic a bit too bright for my taste in a P-bass. Alnico Toneriders fit my idea of a P-bass better 👍

Big fan of Warman pickups but here I'll say Tonerider 👍

Spectacular looking bass. There was a huge amount of work went into the design and manufacture yet they still remembered the little touches like magnetic battery box lids 🙂 Gut feeling is that'll be a wonderful player, you'll have one hell of a merry Christmas when it comes. Congratulations.

I pm'd Stew last week with a couple of 51 templates, completely forgot about the Dirnt one. If I get a chance over the weekend I'll compare them, see what the differences are.

It does that. Winning the battle against temptation just now but 2024 may have other ideas 😃

German lad posted this photo of his PB-50 over on bassic.de earlier. While I'm not one for mirror scratchplates or ashtrays, exceptions can be made 😄

Aye, Brian's the man for the job. Huge choice of colour options, fast turnaround and very reasonable prices.

For me, it's almost the complete reverse. Own a 90's 51 Paisley reissue; an absolutely gorgeous bass, spends it's life stored in the cupboard over the stairs. By contrast my PB-50 has never saw that cupboard, it's kept in a state of constant readiness; to be played without a moment's notice. Might seem crazy preferring a Harley Benton over a Fender but have valid reasons, the PB-50 both plays and sounds better. Not only did FGN opt for a very chunky neck profile they chose to cover it with gloss; the matt finish Benton neck is slimmer and much more comfortable. In matters of tone, the PB-50 is ahead of the reissue; well that what my ears tell me 🙂

I have one like that, came from the initial 2013 production run. Others were bought for pickup swaps/2 saddle bridges etc but that first one was spot on out of the box, no point in change for change's sake so apart from a set of TIs it remains stock 🙂

Sent to your inbox 👍 I've been saying that for years 🙂

Wasn't too bad. Bottom case in the middle of 3 piles, stacked 9 high. Of course those piles were hidden behind 20 basses in gigbags 🙁 Anyone who says you can never have too many basses has never shared a house with 70+ of the damn things 🤣 Sorry to report my efforts were in vain, the pots had no resistance markings on them and the solder monkey at Peavey chose to cover the Alpha product code for his ground points 🤬 All I could get was the factory cap was 0.1 and the pots came from the R 13 series. Looking through my records I see Peavey used 250k pots for both Vol and Tone on everything without a preamp, that 0.1 cap value was also used the the active B-90 and Foundation S models.

Peavey did a few. Along with the RSB there was the B-Ninety, came as a standard passive PJ or active pickups with normal vol/tone pots; Foundation-S active followed the same pattern. Those 2 were fairly low key efforts. If I can unearth my RSB I'll check what pot/cap values were stock from the factory.

Proof my timing is cr@p There's a fella over on TalkBS named Scott Dasson (godofthunder). Scott's nuts about old Gibsons but not too keen on the 3 point bridge so he came up with an alternative; calls it the Badbird. It's a 2 part design so no good if you don't fancy screwing a tailpiece to your bass. Here's Scott and some happy random punter with his 'improved' T-bird😄

Here's my YOB bass, 68 Wilson Sapphire. Sadly I've the Dorian Gray tale in reverse, I get more decrepit every day while the Wilson seems remarkably free from the ravages of time ☹️

As has been pointed out already you'll face no problems, most 'active' basses pair normal pickups with a 9v or 18v EQ section. Easily affordable stacked or split 5 string jazz pickups though are pretty thin on the ground 🙁 You could look at fitting dummy coils but that'll involve surgery, hidden below the scratchplate being the handiest location.

I wouldn't worry too much, depending on who you use it might not be that expensive to fix. I was looking for a hum cancelling single coil ( twice the work + custom bobbin) with a ridiculously high wire count ( 3 times the standard length required), extra long slugs were needed to accommodate all the wire. This considerable move from standard off the shelf spec cost me just £10 more 🙂 There's not a great deal can fail in pickups. Hook up wires can detach (spot of solder/ job done), slugs can lose power (recharge by passing between neodymiums), magnets can detach (glue them back on or replace). Most of the UK folks charge about £30 to repair single coils, £40 - £45 for humbuckers. It's roughly the same for rewind work 👍

Maybe go with the Entwistle humbuckers Rapier are using in their Watson/WEM/Wilson Saffires.

@neepheid My gut feeling is it's some crossover from the guitar world, like this sudden need for infinite sustain we are all meant to have these days😄

I'm never saw the point, my wee stubby fingers never come into contact with the fretboard edges. TBT, I can't think of a situation where they would.

@uk_lefty I remember reading this bold statement on BC several years back, think it was from Camden Rob. "TBH my Harley Benton JB-75 is more than capable for 99.9% of what I do, I have 3 Wal 6 strings for the other 0.1%." 😄

Lower register is muffled, as I move up the neck things get clearer but also louder. I really need to play with pickup heights, there's a lot of clipping.

It's very loud.

Good pickup , I used one in my last 'knock together' https://www.basschat.co.uk/topic/484769-shorty-thrown-together-yesterday/