Gunsfreddy2003

Thanks for that - never heard of Minerva before but their prices look good compared to ACS and Ultimate Ears for example. Does anyone know much about them? Judging by other threads to this post it does seem as though it is worth trying the option of replacing the filter in my ER-15's with a single driver monitor and seeing how that goes. Obviously the isolation will be good as they are custom moulded plugs already so could do the job. [quote name='acidbass' post='1365998' date='Sep 8 2011, 03:51 AM']I'm a regular IEM user and would recommend to go for the best phones that you can afford. Double or triple driver phones are obviously advantageous for us bass player as you have a dedicated bass driver for the low end, although I've heard some mass-produced phones by Sennheiser and Shure that have really solid and tight bass response without the custom price tag. I'm currently using Sennheiser IE-4 phones, and while they aren't exactly blessed with a wide frequency response, they sound OK at the volumes I use them at. My guitarist uses a set of dual-driver Shure earphones, he swears by them although the first set he bought he had to get replaced as the left ear input was faulty! I'd love a set of customs eventually - you should check out a company called Minerva, based in England, very reasonable prices for custom moulds (if you want to go down that route) Hope this helps - have a listen to a few high-end phones if you have an audio shop in your town, sometimes they have the facility. Danny[/quote]

Evening all, A while back I bought an Audio Technica wireless IEM system which works fine but the supplied headphones with it are not up to much. I would like to go to for some custom moulded monitors and need some advice. I already have some ER15 plugs and I have found out that companies like ACS and Puretone make a single driver monitor which can be used instead of the deadening filters in the plugs to make it into an IEM. I wonder if anyone has tried these? Some people that I have spoken to on this subject advise that you must have monitors with 2 or 3 drivers otherwise the sound quality is really bad but I would like to sense check this as there is a huge difference in price and I really don't want to spend a fortune on these unless I have to. Equally I do want a sound that I can use and want to protect my ears too so it is important to get it right. Any advice or experiences really appreciated.

OK - so not moulded to your own ears then? Do they stay in ok and how much external sound do they block out? [quote name='andydye' post='1358183' date='Aug 31 2011, 10:23 PM']I got mine off evilbay for £100 as part of a stock clearance, £200 ish normally I think. they hav 3 drivers though and the sound is superb![/quote]

I was going to get some Ultimate Ears from a place in Enfield, interested to know where you got yours from? I presume they have more than one driver in them? [quote name='andydye' post='1357438' date='Aug 31 2011, 12:55 PM']I have a fischer wired in-ear monitor kit coupled with a pair of Ultimate Ears triple-fi-10s' and it's fab, sounds really good! The triple-fi's keep out most of the background noise and I can choose my volume comfort level, my playing has improved significantly as I can now hear subtelties I couldn't before! It is important to work closely with your sound chappie to get a good in ear mix though!!![/quote]

Anyone? [quote name='Gunsfreddy2003' post='1349587' date='Aug 23 2011, 09:59 PM']Need to learn this tune for new band - sounds like a 5 string to me and wondered if anyone has a TAB for it?[/quote]

Need to learn this tune for new band - sounds like a 5 string to me and wondered if anyone has a TAB for it?

SNAP - had this with my old board but bought a PedalTrain and not had a problem since. [quote name='cheddatom' post='1337368' date='Aug 12 2011, 10:55 AM']I used to do that. The velcro was stronger than the adhesive sticking down the velcro pads so if you wanted to move a pedal, you just ripped the velcro off the board.[/quote]

Have you tried the tape that they mention on the GigRig website - apparently it is fantastic but I have to admit that I haven't used it as the velcro tape from Halfords seems to work fine for me. [quote name='TheRockinRoadie' post='1337342' date='Aug 12 2011, 10:34 AM']Superglue wasnt any good, trust me. I even put industrial carpet glue on it, and that didn't work![/quote]

Have a Sadowsky and and Aguilar Tone Hammer and would highly recommend both of them particularly with passive basses like the Fender Jazz. [quote name='bassjamm' post='1337051' date='Aug 11 2011, 09:54 PM']Hello everyone... I'm looking at outboard pre-amps and all the different options etc. I'm interested in the East one, Sadowsky, Fodera one and ones of these ilk. Does anyone have any experience with any of them? Also, I was thinking of getting the Mike Pope on board pre-amp and mounting it into a box. Would the essentially be the same as an outboard pre-amp with a few alterations chaps? Thanks in advance... Jamie[/quote]

I would agree with the term muddy here. I A/B'd my LMIII with the RH450 at Bass Direct through Bergantino and TC Electronic cabs and the RH450 was certainly a less defined tone and more of the old school motown or reggae type tone. To be fair Mark at BD was pretty sweet on the tone that I was looking for and did state that he thought that the LMIII was more on the money for me than the RH450 just because of the more open tone. [quote name='Smash' post='1307673' date='Jul 18 2011, 12:10 PM']Hi when comparing them side by side, they are very different, the Markbass is clearer, plays better with an outboard distortion pedal and is very good with the RS cabs but I found the RH450 a bit muddy, very good if you were playing Reggae or Dub but if I wanted that high glassier sound I couldn't achieve it. Not saying the RH450 is bad far from it just a totally different tone.[/quote]

Can I be forgiven Pete as I have only had my 'Ray in the house for just over a week?!!! [quote name='stingrayPete1977' post='1306451' date='Jul 17 2011, 10:13 AM']I have just read through from the start and actually I think we all did quite well the first wrong post is #38 Gunsfreddy. To try and clarify my earlier posts to me both clip 2's sounded nearest to what [i]I would[/i] call a Ray sound so even if they had of come from something else to me those clips would still of been the most Ray to me, The fact they did come from a Ray may hold some weight or it may not Just to prove you dont need the fret clank to have the Ray sound I give you [url="http://www.youtube.com/watch?v=jWHQtGIF658"]http://www.youtube.com/watch?v=jWHQtGIF658[/url] [/quote]

Hey Pete, could you send me over that wall paper? [quote name='stingrayPete1977' post='1305340' date='Jul 15 2011, 11:29 PM']Ha! All mine are in there somewhere, I got a free old style MM logo wall paper off the guy who runs it the other day.[/quote]

Agree that neither sounds very 'Ray'ish but my vote is for 1!

I have Grade V theory but still cant sight read and never have been able to which like the OP I find very frustrating. My problem has always been with the rythmn, if you add a dot then it makes that note half as long again but how the hell do you measure that when looking at a quaver for example!! [quote name='stingrayPete1977' post='1304035' date='Jul 14 2011, 09:46 PM']This was me and I agree it's frustrating when you can just play a flurry of notes when you cock up that is more involved than the simple notes your meant to be playing off the sheet! The bass clef game in the YTS thread is good for getting the notes nailed and if you already know where the basic root notes are on the neck that's part of the trick sorted, the only problem is that the rhythm for most is the hardest part anyway. Which bit are you having most trouble with jazzneck? Try and solve one thing at a time I'd say.[/quote]

Yep interested to hear anything more ref the 3 Leaf Proton as it is supposed to be very Mu-Tron'ish. [quote name='Higgie' post='1295838' date='Jul 7 2011, 12:17 PM']Shep, There's the "Whammy Wheel" which has been sold on eBay for yonks - Same kind of idea as the Kickdisk, but looks a lot sturdier? Dunno if that would help? And as for envelope filters, of the "small" lot, I'd recommend either the Maxon AF-9, or the Subdecay Prometheus. Prometheus is a lot more versatile, but Maxon has it's charm. Also the MXR Bass Envelope Filter is awesome, and although I haven't tried them, I'm itching to get my hands on a 3Leaf Proton (to test against my Mutron) and an Aguilar Filter Twin. Really don't think you can go wrong with any of those units. Prometheus gives you the most bang for your buck, but might be a little bit too big. Just my 2p worth [/quote]

I might be able to make that one. [quote name='pete.young' post='1295210' date='Jul 6 2011, 09:19 PM']Unhfortunately I'm not going to be able to make it tomorrow. Maybe next week?[/quote]

MXR M82 then!!! [quote name='pantherairsoft' post='1295196' date='Jul 6 2011, 09:11 PM']For once I'll keep it on a budget and keep my eye on the or sale forums. I own a Groove Regulator which is on my main setup and I do love it! It's a bit too large to fit on this little board though, and maybe a little deep and sunny for what I do. Needs to be sensibly priced and no larger than a Boss/EBS unit. Shep[/quote]

I think that came up as I was typing! I'd go for the Aguilar Twin or Mu-Tron if you are feeling flushed. [quote name='pantherairsoft' post='1295186' date='Jul 6 2011, 09:03 PM']Read the post above! I'm on the lookout for one [/quote]

What no envelope filter in a funk project? [quote name='pantherairsoft' post='1295107' date='Jul 6 2011, 07:57 PM']My mini board - for my acoustic funk trio - Slight change from my usual set up TC Ploytune -> EBS Unichorus -> Subdecay Echobox -> EBS MultiComp Shep[/quote]