0175westwood29

i can help you with the tk421 thats basically a rat on steroids!

Tarkin will do light to full on fuzz! And stacks well with other pedals

ive got a soft spot for the redwitch moon phaser really nice, but also the dod phasor is cool as is the mxr phase 99 Andy

Demo' d my moth this week can do heavy overdrive to fuzz And the tremolo circuit is crazy! Video goes up at 9 am https://youtu.be/A0e8RHtNhIY

[quote name='highwayone' timestamp='1480849189' post='3187471'] Using a Marshall mb4410 and an epi eb0 and the belcat distortion pedal. Trying to get a full on fuzz for a couple of songs rather than grit.cheers [/quote] cool for me from listening to a few demos, that pedals gonna struggle for me to get you some really big fuzz tones, also im thinking theres gonna be some low end loss (I can hear it on a guitar demo i found so will be worse on bass) its the standard answer really but maybe look at grabbing a dedicated fuzz, ive got a few faves but everyone will have something different but i use a Fuzzrocious Heliotropic, Moth or Cicada for my fuzz tones but also have a Grey Stache (green muff based fuzz) that i use from time to time. all sound big and will cut thru in a mix......but all are obviously rig dependant!

what sort of sound are you looking for? and what sort of gear are you using. ie do you want all out distortion or just some grit? also if you are stood in front of your amp and with any hi gain pedal unless there is some sort of gating involved you'll get feedback when not playing unless you roll of your volume. you will get lots of suggestions for dirt and drive here but what did you buy?

so after having alot of issues with photobucket thanks to flickr heres my lastest board set up! https://flic.kr/p/PLyyGq

As the title says ....... https://youtu.be/bqWNJNOaxuQ

[quote name='Sibob' timestamp='1479997015' post='3180882'] Don't think TRAPCo is going any more, or rather Shep sold his share to Mark ages ago. I know Dan @ Gig-Rig does this for quite big acts (presumably because it's pretty expensive). It's not something I'd invest in, simply because I'm constantly tinkering and changing stuff, ripping it off and starting again. Unfortunately this means that it's never tidy haha. Sure there's plenty of people who'd be interested, but yeah, needing to be on Facebook in order to view details of the page might be a little restricting perhaps, maybe a Tumblr type holding page would also help. Si [/quote] Yeh I'm looking at ways of expanding ATM

[quote name='SubsonicSimpleton' timestamp='1479733804' post='3178795'] You can probably rewire it internally without any issues, but you'll need to check the impedance of the individual drivers to calculate what your options will be for the impedance that will be shown to the amp. Old ampeg 8x10s use 32ohm drivers that are parallel wired to achieve the final impedance IIRC, but your ashdown cab might be using a different wiring scheme and lower impedance drivers to reach the final 4 ohm impedance for the cab. Once you know the impedance for a single driver in your cab, the maths for what options you will have is pretty easy. [/quote] At least someone got what I meant! Might try pulling a driver at practice in that case and see

[quote name='EBS_freak' timestamp='1479811176' post='3179396'] go for 4 2x10s. At least you will be able to carry them then... and take the appropriate number for the gig. [/quote] Appropriate number is 810's ;-)

[quote name='6v6' timestamp='1479712835' post='3178566'] I tried this once with an old traynor 4x10, it pretty much fell to bits after I ran the saw through it (cheap osb board and stapled together without much glue). Whole thing ended up in the bin! I'm sure this is possible but I'd say you're better off selling unless you're sure it's solid ply construction where you can get some good strong joints with battens, screws etc on the new wood. Then there's the finishing to consider, which will be hard to do neatly unless you re cover both boxes completely. [/quote] Not looking to cut it man, looking to split the wiring internally like the ampeg 810

So this is the current board will change again tho next week when a few more Fuzzrocious pedals arrive! And squeeze there way on! https://youtu.be/UwMA8KELtOE

https://youtu.be/UwMA8KELtOE

hi guys wondering if its possible to mod my current Ashdown Mag 810t to be like the ampeg 810 where it can split into 2x410? obviously the cab is 4 ohms atm, anyone done anything like this or am i better looking for the ampeg Andy

[quote name='danbowskill' timestamp='1479581331' post='3177656'] [attachment=232338:20161119_161200.jpg] [/quote] nice little board that! Andy

A big fuzz, something like a Fuzzrocious cicada or Zuul and a the Moog clusterflux

[quote name='bazztard' timestamp='1479439114' post='3176574'] me or FB ? I wished him luck, why was that rude? Because I refuse to join FB just to look at a pic? My beef is with FB not the OP. sorry if it read wrong [/quote] Joking mate rude of facebook

[quote name='hiram.k.hackenbacker' timestamp='1479425826' post='3176539'] Don't take this personally, but I'm assuming you've done your research and believe there to be a market for this? I just can't quite see it myself as effect chains can be a very personalised thing and can take quite a while to get right through trial and error i.e. playing them live through the rig you use. [/quote] NO offence taken It's something I enjoy, but for a lot of people have a board but dntwant the hassle of making it tidy etc. Trying to attract more touring guys etc who just want something solid. Looking to make a few quid and make some cool boards not looking for a monthly wage I have a day job