bagsieblue

Yep - its a 1990 neck on an older body. Body signed off as 1990 too, I assume to match the neck date when assembled (as the bass now is) in 1990.

Still looking......

Now £900 plus £35 to ship mainland UK.

Ernie Ball Round Wound Power Slinky Bass Guitar Strings 55-75-90-110. £15 posted Mainland UK. Cut for 2+2 with 3 or 4 winds around the post. Couple of hours use - not to my taste so taken off. Can send a photo of the actual strings if needed, but they are in excellent condition.

Gauge are 45-100

Ooosshh - gotta stop looking at this bass!!

Genz Benz NEOX-210T. £350 collected Chorley, Lancs or can ship at cost. Good condition - all works as it should. Cab has had a matching replacement speaker in its life - still sounds fantastic. Some minor signs of wear on the carpeting and some scuffs on the corner protectors, so please do not expect pristine. The Genz Benz NEOX-210T bass enclosure is designed around 2 ultralight, cast-frame 10" neodymium loudspeakers. These drivers deliver exceptional power-to-weight performance, enhanced tone, and frequency response. The bass speaker's lightweight design, Edge-Lift handles, and tiltback casters make traveling a breeze. GNX 10250 Neodymium Loudspeaker The NEOX-210T's redesigned 10" neodymium cast-frame speaker uses a 2" voice coil. The motor structure is designed around a 7 oz. neodymium magnet with exceptional heat management characteristics. Through Finite Element Analysis the weight of the driver has been significantly reduced and the optimized magnetic circuit delivers a more efficient high-output response. The paper cone, spider, and dust cap have been calibrated to deliver the low-frequency support and midrange articulation that today's bassists demand. Features 450W RMS 2 x 10" neodymium loudspeakers Dual Edge porting system for increased low-frequency projection Edge-Lift handles Tiltback casters Specifications 450W RMS handling Frequency response: 60Hz-18kHz Sensitivity 1W/1M: 101db Impedance: 4 ohms Crossover point: 4kHz 21-1/4"W x 25"H x 16-1/2"D 50 lbs.

I have another one I could be persuaded to sell.

Wal Mk 1 / Custom / Pro. Now £5500 collected (Lancashire), not keen on shipping given the value but PM me if its a deal breaker. Open to part trades....... Its made from a solid ash body, (not mahogany) and a face wood!. Very unusual on a custom Wal (aka MK1). Basically its a Pro neck on a standard Custom series. It is actually reasonably common for Wal to service basses in this configuration. So, I believe, a Pro 1 neck put onto a Mark 1 body at Wal in 1990. Probably, likely have been a customer request. Set up and plays beautifully. Lots of wear on this bass - cracking and crazing of the finish and cracking and crazing on the headstock. Very common for Wal Basses to have these crack lines in the poly finish on the rear of headstock “volute” area. If there’s a solid colour that suits a Wal it’s definitely black.. Signed off as 1990, and shows signs of use commensurate with this, please do not expect an as new pristine bass. Weight is 4.437 Kg on my digital kitchen scales, so fairly lightweight for a Wal bass of this period. The wait on a new Wal bass is circa 5 years at present! I've tried to capture all this as best I can in the photos added - happy to send more photos and details as required.

Thank you - now fixed.

Gallien Krueger GK Fusion 550. £500 shipped Mainland UK. I have the original box so can ship safely. A few marks, dings and scrapes on the casing from normal use but all works as it should. The Gallien-Krueger Fusion 550 is GK's first bass amp head featuring an all-tube preamp. The Fusion 550 bass head incorporates a uniquely designed 6-stage tube preamp paired with a 500W version of the high-current solid-state power amp used in the GK 1001RB-II. The rich warmth of tubes, combined with the quick, punchy power that G-K bass amps are known for, is an aural experience you must hear to believe. As if that wasn't enough, GK has inventively incorporated motorized knobs into the Fusion 550 head that allow you to store two different settings. This gives you the ability to dial in a separate overdrive or slap tone and footswitch between them--a first for a fully analog bass amplifier. The Fusion 550 amp also features a simplified version of GK's exclusive 50-W Horn Bi-Amp System. Dial in the horn where you like it, and as you adjust your volume with the master control, the ratio between the woofer and tweeter is preserved. Other features include a tube driven 4-band active EQ and voicing filters with a frequency select for the contour control. The rear panel features include Neutrik Speakon and 1/4" speaker output jacks, effects loop, tuner out, and a footswitch input jack. It also has a DI output which uses an isolated transformer for ultra-quiet operation. FEATURES Power Amp 500-watt Class G high-current solidstate power amp 50-watt Horn Bi-Amp System 3Toroidal transformer Pre Amp 1Six-stage all tube preamp (three 12AX7's) 2Motorized pots allow 2 presets 3Footswitchable two-channel motorized gain, master, and horn level controls 4Tube driven four-band active EQ 5Contour control with 500Hz-800Hz mid-frequency select 6Deep and bright switch 7Mute switch 81/4" input jack with active/passive switch (-14dB) Rear Panel 1Effects loop & tuner output 2Active DI with level control, pre/post, and ground switch 3Two Horn Bi-Amp compatible Speakon outputs 4Two 1/4" speaker outputs (fullrange only) 5Rear-vented temperature controlled fan Bring your bass sound to the forefront with this exceptional bass amp from G-K. Order today. SPECIFICATIONS Dimensions: 119"W x 5.25"H x 9.75"D 2Three rack spaces 3Weight: 24.5 lbs.

Now £1750 - can ship mainland UK for £35.

Screenshot for output. Dimensions (W x D x H) 19" x 14" x 3U (48cm x 36cm x 13cm)