Jump to content
Why become a member? ×

Recommended Posts

Posted (edited)

@JPJ interesting about putting out too much light - was the iColor adjustable on brightness? I guess another would be an extension plug with built in dimmer switch. (Although dunno if that is going to set off any safety issue alarm bells?)

Edited by Al Krow
Posted
4 hours ago, JPJ said:

So at our last gig one of my old iColor 3’s took a stage dive and is no longer with us 😪 Having hummed and haa’d about upgrading for some time, I have finally bit the bullet and gone for a pair of LEDJ 211’s. They put out quite a bit less lumens but we never ran the iColor’s at full power anyway so I am hoping these will serve well as stage wash lights. I will report back once I’ve tried them out in anger. 

We are using the two original LEDJ Q Colour filters for stage wash. Those new LEDJ fixtures you've just purchased are more powerful so I suspect they will do the job nicely. 

Posted

Another band I know well have been using a Stairville CLB5 for their gigs. What seems particularly neat about this unit (although my mate's band are not using it this way) is the ability to set one or two of the units to light up the stage area in white with a steady beam, but have the the remaining two or three units in colour to light up the dance floor with sound to light, and manage to do that all without DMX.

 

I think I'm going to give it a spin as a relatively budget one-stop solution to enhance both the stage and audience lighting for the band. It's also a lot more compact than my Chauvet GigBar2 and therefore will be a lot easier to take to gigs and consequently likely to get more use!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...