Trace Elliot - Rescue & Restore (and bargain finds)

[Hypo199]

1 hour ago, Rosie C said:

I've a couple of questions - did the 15" cabinets not have Trace Elliot badges? There's no sign it ever had one. 

This appears to have one but it may have been added by the owner.
 

https://www.ebay.co.uk/itm/306528129319

TBH I can't remember many cabs having them back in the day, or if they did they didn't retain them for long. I guess many badges were rattled loose by the monster tones and left lying on a stage floor somewhere, probably out of reach of the now crippled owner who'd had to get the cab out of the venue into the van. 

[Rosie C]

32 minutes ago, Hypo199 said:

TBH I can't remember many cabs having them back in the day, or if they did they didn't retain them for long. I guess many badges were rattled loose by the monster tones and left lying on a stage floor somewhere, probably out of reach of the now crippled owner who'd had to get the cab out of the venue into the van. 

The badge on my 2x10" is riveted on but there are no holes on the 15". But then in that ebay listing the badge looks stuck on. Hmm...

An unexpected bonus is the valve pre-amp. I wasn't expecting that and haven't had any kind of valve amp before 😊

 

[Stub Mandrel]

I think some were jyst held on by hot melt.

 

@Rosie C I can 3d print one for you if you dont mind painting it yourself.

 

This is my design:

 

https://www.thingiverse.com/thing:6675528

 

[Sparky Mark]

2 hours ago, Rosie C said:

Well I did it! We went to view an AH300 tonight. I took my fretless jazz to try it and it sounded fantastic! Lovely condition, and it came with original manuals, sales receipt and the pedal board. Flippin' heavy though. Sadly my partner bought it for me for Christmas so no playing with it for a few weeks. ☹️

 

I have a couple of questions - did the 15" cabinets not have Trace Elliot badges? There's no sign it ever had one. 
 

Also the electro fluorescent front panel doesn't work, the seller said he thought it was deliberately disconnected, so that's something to look at. Any suggestions where to start with that?

Anyway thanks for all the advice and opinions, I'm very happy with it!  😊

Have you looked through this thread yet? There's a lot of brochures showing the badges used over time.

 

[SimonK]

oops duplicated post...

Edited 2 hours ago by SimonK

[SimonK]

10 hours ago, Rosie C said:

Well I did it! We went to view an AH300 tonight. I took my fretless jazz to try it and it sounded fantastic! Lovely condition, and it came with original manuals, sales receipt and the pedal board. Flippin' heavy though. Sadly my partner bought it for me for Christmas so no playing with it for a few weeks. ☹️

 

I have a couple of questions - did the 15" cabinets not have Trace Elliot badges? There's no sign it ever had one. 
 

Also the electro fluorescent front panel doesn't work, the seller said he thought it was deliberately disconnected, so that's something to look at. Any suggestions where to start with that?

Anyway thanks for all the advice and opinions, I'm very happy with it!  😊

 

Good job - life is always better with a bigger Trace Elliot stack!

 

Re the badge on the 15, lots of people who like this orientation took them off because they didn't like the badge on sideways (I do, and then hook them back on). I suspect if you look closely at the grill on what would be the top right in the picture above you may see some signs of it being removed. If the logo on the 2x10 is riveted on this will be a very late example of these cabs, possibly left over stock from when they went to Peavey.

 

Although I haven't got this specific head I'm pretty certain there wasn't a black light. Instead everything green will fluoresce under black light. I bought some very cheap black light strips from ebay when I did my cab project and they make the amps look awesome:

 

Edited 2 hours ago by SimonK

[Rosie C]

9 hours ago, Sparky Mark said:

Have you looked through this thread yet? There's a lot of brochures showing the badges used over time.

 

 

Thanks! 

 

10 hours ago, Stub Mandrel said:

I think some were jyst held on by hot melt.

 

@Rosie C I can 3d print one for you if you dont mind painting it yourself.

 

This is my design:

 

https://www.thingiverse.com/thing:6675528

 

 

Ooh, thank you.    

 

I did a bit of internet searching late last night and found this 15" cabinet on ebay which looks to be the same model as mine and the badge looks the same as your 3D printed one:

 

 

Close up of the ebay cabinet badge:

 

 

But this is the badge on my 2x10 and it is different. In fact it looks very like the badges on the new Elf cabinets so maybe it is a late model?

 

 

 

 

1 hour ago, SimonK said:

 

Re the badge on the 15, lots of people who like this orientation took them off because they didn't like the badge on sideways (I do, and then hook them back on). I suspect if you look closely at the grill on what would be the top right in the picture above you may see some signs of it being removed. If the logo on the 2x10 is riveted on this will be a very late example of these cabs, possibly left over stock from when they went to Peavey.

 

Although I haven't got this specific head I'm pretty certain there wasn't a black light. Instead everything green will fluoresce under black light. I bought some very cheap black light strips from ebay when I did my cab project and they make the amps look awesome:

 

Thanks for that, very useful and sounds right - I downloaded the service manual last night (which is when I discovered the 'valve drive' knob is connected to an actual valve) and couldn't find anything on the circuits powering a panel. I see some photos on the 'net of them lit up (see below) but there are so many different models it's hard to be sure which is which.

 

Someone else's amp - of course there could be a blacklight behind the camera...

 

Edited 20 minutes ago by Rosie C