Jump to content
Why become a member? ×

Capacitor identity


Recommended Posts

Can someone identify this capacitor. It's on a PS1 power board. The top looks a bit bulge so I think need replacing . The power board fuse keeps blowing everytine I plug in the power supply. I think I may try to replace the capacitor once I have the correct one. Picture of capacitor and fuse space . Thank you 

17156096818837984730280615711346.jpg

17156097019771120138255790542186.jpg

Link to comment
Share on other sites

Probably worth sending a pic to Nichicon UK - trouble is it could be a special made for the ps board manufacturer, but their tech boys should be able to identify it

  • Like 1
Link to comment
Share on other sites

Posted (edited)
1 hour ago, TimR said:

As @itu states that model has a revision using 39uF and that would tie in with the 39 on the case.

 

Not sure why there's not plastic sleeve on it though.

The plastic sleeve makes it harder to search, would a 49uf 400 volt work. Like this one.

 

 

 

Screenshot_20240514-090856.png

Edited by SH73
.
  • Like 1
Link to comment
Share on other sites

Posted (edited)
1 hour ago, TimR said:

https://uk.farnell.com/rubycon/400bxw39mefr12-5x25/cap-39-f-400v-20/dp/2480322

 

I'd stick with 39uF.

 

Ignore the long skinny photo the cap is 12.5mm dia by 25mm high. See if that's a similar size to what you have. 

 

 

Mine is 16mm by 20 mm, but looks like room to fit a 25 mm.

£9.99 handling charge ,comes to nearly 14 quid 🤣

Edited by SH73
.
Link to comment
Share on other sites

42 minutes ago, SH73 said:

Mine is 16mm by 20 mm, but looks like room to fit a 25 mm.

£9.99 handling charge ,comes to nearly 14 quid 🤣

 

Buy some other bits at the same time. Components are expensive if you buy them one at a time. 

  • Like 1
Link to comment
Share on other sites

12 minutes ago, TimR said:

 

Buy some other bits at the same time. Components are expensive if you buy them one at a time. 

That makes sense , wish we lived in 80s when these were available in some high street shops. 

Link to comment
Share on other sites

1 hour ago, SH73 said:

Mine is 16mm by 20 mm, but looks like room to fit a 25 mm.

£9.99 handling charge ,comes to nearly 14 quid 🤣

 

Check the lead spacing, that's very important.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...