Jump to content
Why become a member? ×

Lightweight and simple bass heads


TheIrishOx
 Share

Recommended Posts

I dont know if its just me but lately I been dissappointed latley, i think i spelled dissappointed wrong :rolleyes: , cause I have been searching for a simple lightweight powerful bass head that has that no tweaking plug in play style to it. I don't know if I'm being too picky or too general, but can some one recommend me a bass head. Thanks :)

Edited by TheIrishOx
Link to comment
Share on other sites

It's not particularly lightweight – but you can't get much simpler than the new Hartke LH500/LH1000:

[url="http://www.samsontech.com/products/productpage.cfm?prodID=1942&brandID=3"]http://www.samsontech.com/products/product...2&brandID=3[/url]

Link to comment
Share on other sites

Shuttle 6.0? 600W @ 4ohms and 3.75lbs - just plug it in with everything set flat and it sounds great IME. No tweaking required :) The LMII is also worth looking at. Neither requires extensive tweaking.

[url="http://www.genzbenz.com/?fa=detail&mid=2259&sid=610&cid=95"]http://www.genzbenz.com/?fa=detail&mid...=610&cid=95[/url]
[url="http://www.markbass.it/products.php?lingua=en&cat=1&vedi=69"]http://www.markbass.it/products.php?lingua...t=1&vedi=69[/url]

Link to comment
Share on other sites

There are other options like this - [url="http://basschat.co.uk/index.php?showtopic=20284&hl="]http://basschat.co.uk/index.php?showtopic=20284&hl=[/url] - Alien did an amazing job with this, but of course you would need a pre amp of some sort.

Link to comment
Share on other sites

I'll probably get flamed for suggesting this, but I'm using an Ashdown ABM for my simple tone machine. It's lighter weight than some of the other suggestions here.

Valve drive on 12 o'clock, pre-shape on, eq off. Only gain and volume to worry about then. As far as I'm concerned Ashdown would do well to release an amp with gain, valve/clean blend and volume AND NOTHING ELSE. There are thousands of guys looking for a simple bass amp - that could be just the tool and surely more useful to them than these mythical 'little giants' we keep hearing about...

Edited by Bigwan
Link to comment
Share on other sites

[quote name='Bigwan' post='346137' date='Dec 5 2008, 09:24 AM']I'll probably get flamed for suggesting this, but I'm using an Ashdown ABM for my simple tone machine. It's lighter weight than some of the other suggestions here.

Valve drive on 12 o'clock, pre-shape on, eq off. Only gain and volume to worry about then. As far as I'm concerned Ashdown would do well to release an amp with gain, valve/clean blend and volume AND NOTHING ELSE. There are thousands of guys looking for a simple bass amp - that could be just the tool and surely more useful to them than these mythical 'little giants' we keep hearing about...[/quote]

A great sounding head to be sure, but definitely no lightweight.

Link to comment
Share on other sites

[quote name='~tl' post='345929' date='Dec 4 2008, 09:59 PM']It's not particularly lightweight – but you can't get much simpler than the new Hartke LH500/LH1000:

[url="http://www.samsontech.com/products/productpage.cfm?prodID=1942&brandID=3"]http://www.samsontech.com/products/product...2&brandID=3[/url][/quote]
And [url="http://basschat.co.uk/index.php?showtopic=26831&hl=valve"]this thread[/url] discussing it isn't particularly lightweight, but a good read nonetheless.

EDIT: Ben, what the f*** was all that about last night mush? f***ing useless calamity c***.

Edited by johnnylager
Link to comment
Share on other sites

[quote name='johnnylager' post='346200' date='Dec 5 2008, 10:20 AM']EDIT: Ben, what the f*** was all that about last night mush? f***ing useless calamity c***.[/quote]

A comedy of errors, what a load of sh*t. The most f***ing annoying thing is if that c*** Inzaghi didn’t get his last minute equaliser at FP then we’d be through. f***ing c***. Calamity James, unlucky, use your hands you twat. sh*t happens, but realistically we’ve just had our most successful 12 months within the last 50 years; not bad.

Link to comment
Share on other sites

[quote name='benwhiteuk' post='346218' date='Dec 5 2008, 10:32 AM']A comedy of errors, what a load of sh*t. The most f***ing annoying thing is if that c*** Inzaghi didn’t get his last minute equaliser at FP then we’d be through. f***ing c***. Calamity James, unlucky, use your hands you twat. sh*t happens, but realistically we’ve just had our most successful 12 months within the last 50 years; not bad.[/quote]
Fair play. Unlike [quote]that c*** Inzaghi[/quote]

3 off the baggies sunday anyway.

Edited by johnnylager
Link to comment
Share on other sites

[quote name='ezbass' post='346196' date='Dec 5 2008, 10:15 AM']A great sounding head to be sure, but definitely no lightweight.[/quote]

I stand corrected. I thought it would have been out-weighed by the hartke LH500 - but the LH500 is 10.5 kilos, the abm is 14... the wooden case probably adds about half of the difference. Strip out all the useless tosh and it's be even lighter! I feel a wee project coming on... Anyone got a spare ABM going cheap?

Edited by Bigwan
Link to comment
Share on other sites

[quote name='Bigwan' post='346137' date='Dec 5 2008, 09:24 AM']I'll probably get flamed for suggesting this, but I'm using an Ashdown ABM for my simple tone machine. It's lighter weight than some of the other suggestions here.

Valve drive on 12 o'clock, pre-shape on, eq off. Only gain and volume to worry about then. As far as I'm concerned Ashdown would do well to release an amp with gain, valve/clean blend and volume AND NOTHING ELSE. There are thousands of guys looking for a simple bass amp - that could be just the tool and surely more useful to them than these mythical 'little giants' we keep hearing about...[/quote]

I agree. I rarely use anything on my ABM but a bit of valve drive and it sounds great flat. Companies often don't seem to cotton on to what punters want without a hefty kick up the arse.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...