Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Short Scale Cheap Build


Jabba_the_gut
 Share

Recommended Posts

I keep hoarding bits of wood, like offcuts from previous necks, that I think will be useful one day. A while ago I glued a few strips together to see if this might be possible. The blank was shorter than a normal bass neck so I thought about making a guitar. Having left this for a while and having seen the error of my ways, I've decided to make a cheap short scale bass. Here's the build so far...

I started this with pretty much no plan as a 'we'll see what happens as it goes along', my starting point is the neck blank I've made a set of D'Arrario XL155 strings that I picked up from here a year or so back. The strings are designed for a 6 string 30" scale Jerry Jones guitar but I'm going to just use four of them for a short scale bass. I'm aiming to have this as standard tuning but that might change depending on how it goes.

I'm also aiming for this to be reasonably cheap. I'll have to buy a few things but I'd like to keep that to a minimum.

Here's the starting point - offcuts from a couple of previous necks laminated to (just) make up the required width.



I've got some bits of hardwood from the edge of an old desk, a narrow offcut of spalted beech and a bit of sycamore I'm going to use. The sycamore was made up to be the central block of another bass but it wasn't good enough for that project but will be ideal for this one.

Link to comment
Share on other sites

The StewMac website has a useful tool for calculating fret positions for a given scale length. The neck for this build is just a little short but I've settled for a scale length of 29 1/2". I'm hoping that this minor adjustment in length won't affect tuning too much. I've measured and marked up and cut the slots (using a jig I bought off here a while back).



Link to comment
Share on other sites

I've cut the spalted beech into four strips, each about 5mm thick with the aim of joining them to make a top. I'll put these either side of the sycamore block left over from a previous idea. There are a few places where the spalted beech is a little thinner (because I used a normal handsaw to cut them and it didn't go entirely to plan...) so this an the length of the central block will start to dictate the shape of the body.

Link to comment
Share on other sites

I've got some black tuners and individual saddles - they're only cheap ones from China I bought off eBay a while back. I also bought a pickup from the bargain bin of a local guitar shop. It's an EMG 45CS, a little bit scratched on the face but works fine - can't got wrong for £5!!! I like EMG pickups because they are silent, though they're not to everyone's taste.

I made neck and body templates from 6 and 8mm MDF. I'd like to have a bit of an angle on the bridge to match the neck join but will probably have to adjust this to get the saddles in the right place for intonation.

Link to comment
Share on other sites

One thing I didn't have was anything to use for a body. I bought some sapele from a local hardware store - cost £20 but has quite a straight grain and is quarter sawn. There was an offcut that will be long enough for another neck.......

I've used a piece of wenge veneer between the spalted beech and sapele just to provide a little contrast. All glued together and clamped.

Link to comment
Share on other sites

Really nice work here! Love the grain of that spalted beech too.
How do you manage to keep everything so neat & tidy? If this had been done by me, there'd be trickles & splashes of glue everywhere ;)

Will be keeping an eye on this - great work Jabba :)

Link to comment
Share on other sites

You know, I look at these builds by the members on this forum and I'm really impressed. There is sooo much talent amongst you all. This looks amazing and can't wait to see the final outcome. Love the spalted top and using offcuts too!! I would love to have the skills to do this sort of thing but the less said there the better!!!

Link to comment
Share on other sites

[quote name='Andyjr1515' timestamp='1489490602' post='3257321']
Excellent to see another one of you builds, Jez :)

Great concept and I just love that shape. In elepsed time, how long so far to the stage you've got to? It looks fast work to me :)
[/quote]

Cheers Andy. It has been pretty fast so far - I've faffed around a lot less with the design this time!! I've also had practice on previous builds making templates so that has been much quicker this time too. I'm not sure how long but I'd guess I've probably spent a day actually building so far.

I'll try to keep a track of material costs as well for this one out of interest. Won't be a true cost as such as I'm using some off cuts I already have but here's an approximation so far:

Sapele wood for body £20
Truss rod £10
Tuners £6
Bridge £7
Neck wood £0 (offcuts)
Central block on body £0 (rejected from another project)
Fretboard £0 (recycled)
Spalted beech £0 (offcut - I paid £15 for the piece this came from which also made the top in the previous post)
Wenge veneer £4 (cut from a larger piece bought for £16)
EMG pickup £5 (from bargain bin in local guitar shop)
Nut £4

Still need a few bits of hardware like pots, strap buttons and fret wire.

Haven't decided on the finish for this yet.

Edited by Jabba_the_gut
Link to comment
Share on other sites

[quote name='Jabba_the_gut' timestamp='1489533006' post='3257787']


Cheers Andy. It has been pretty fast so far - I've faffed around a lot less with the design this time!! I've also had practice on previous builds making templates so that has been much quicker this time too. I'm not sure how long but I'd guess I've probably spent a day actually building so far.

I'll try to keep a track of material costs as well for this one out of interest. Won't be a true cost as such as I'm using some off cuts I already have but here's an approximation so far:

Sapele wood for body £20
Truss rod £10
Tuners £6
Bridge £7
Neck wood £0 (offcuts)
Central block on body £0 (rejected from another project)
Fretboard £0 (recycled)
Spalted beech £0 (offcut - I paid £15 for the piece this came from which also made the top in the previous post)
Wenge veneer £4 (cut from a larger piece bought for £16)
EMG pickup £5 (from bargain bin in local guitar shop)
Nut £4

Still need a few bits of hardware like pots, strap buttons and fret wire.

Haven't decided on the finish for this yet.
[/quote]
Wow! That's quick!

...and cheap (in a very good way :) )

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...