Active Barefaced

[Jack]

Although it wouldn't be appropriate/necessary with full range cabs like these, we've been successfully using the aux-fed subs method for some time now. The main advantage of aux fed is that it keeps 99.99% of LF content out of the tops.

You don't need that by all accounts with these barefaced cabs, but all those of you wondering why or how you'd only use sub, the answer is you'd use an aux output.

With regards to sub placemnt, we always have one top on a stand and then the other one stacked on top of both subs. Less power alley that way, and it keeps cabling neater. Granted, the LF output is unnoticeably higher on the sub side, but we just make sure to put them furthest from the bar!

[Happy Jack]

[quote name='Jack' timestamp='1427131477' post='2726195']
With regards to sub placemnt, we always have one top on a stand and then the other one stacked on top of both subs.
[/quote]

Is this a zen thing? Sounds like a Moebius sub to me.

[jazzyvee]

Zombie thread revival.

I bought an LF800 sub from a member here, ( not attributing any criticism at him). This summer I took it on a few gigs with a bbii to deal with the highs and the LF800 From the low frequency output of my preamp.  Then on one gig it was fine at soundcheck but come showtime, nothing out of it at all. Brought it home the audio and mains cables are fine. however when plugged into the mains no light comes on. I hace contacted Bareface by email, got one response to confirm it was the 12" sub not the 18." but nothing else. Emailed today again with no response and the phone number is not working. I'm hoping someone from BF reads this and gets in touch. Basically if the plate amp is shot, i would like to be able to get hold of another, failing that, remove it, seal the hole and convert it to a 12" non powered sub that i can drive from my power amp. Anyone have the ear of Alex?