Horizontalste Posted January 10, 2012 Share Posted January 10, 2012 My Bb300 volume knob is stiff to turn. I was wondering what the best remedy is? Its just a standard passive pot. Cheers Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted January 10, 2012 Share Posted January 10, 2012 Switch/contact cleaner then as for most stiff knobs vigorous friction. Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted January 10, 2012 Share Posted January 10, 2012 Just checking, you've removed the knob and the ... ahem... shaft is still stiff? Sometimes the bottom of the knob can rub up against the body and become stiff... ... I'm off for a cold shower. Quote Link to comment Share on other sites More sharing options...
Hobbayne Posted January 10, 2012 Share Posted January 10, 2012 Fnarr! Fnarr! Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 [quote name='Ou7shined' timestamp='1326194950' post='1493492'] Just checking, you've removed the knob and the ... ahem... shaft is still stiff? Sometimes the bottom of the knob can rub up against the body and become stiff... ... I'm off for a cold shower. [/quote] Lol, I haven't removed it yet, should probably have investigated before posting. Is the a particular contact cleaner or are they all the same? Thanks for the advice on the Farcela polish too,its great. Quote Link to comment Share on other sites More sharing options...
Ou7shined Posted January 10, 2012 Share Posted January 10, 2012 Maplin (for example) have various types of cleaner which claim to be for various specific purposes but as far I can tell they are all pretty much the same thing. I think if anything contact cleaner leaves no residue but switch cleaner maybe lubricates slightly. I've used both with equal results though. Np. Quote Link to comment Share on other sites More sharing options...
neepheid Posted January 10, 2012 Share Posted January 10, 2012 (edited) [quote name='Horizontalste' timestamp='1326195212' post='1493495'] Is the a particular contact cleaner or are they all the same? [/quote] Servisol Super 10. Other switch/contact cleaners are available, but this is the one I use and trust. I cleaned up an entire mixing desk with this stuff, including some pots which were totally stuck and had to be started moving again with pliers Edited January 10, 2012 by neepheid Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 Nice one, Off to Maplins. Quote Link to comment Share on other sites More sharing options...
StraightSix Posted January 10, 2012 Share Posted January 10, 2012 As previously stated - make sure your knob is not rubbing on your body Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 [quote name='StraightSix' timestamp='1326196884' post='1493530'] As previously stated - make sure your knob is not rubbing on your body [/quote] Yup, definitely no knob rubbing going on, Quote Link to comment Share on other sites More sharing options...
BILL POSTERS Posted January 10, 2012 Share Posted January 10, 2012 The lubricant had dried out thats all, quick squirt with switch cleaner, or even a little drop of light oil into the hole will sort it out. If the knob is rubbing on the facia you can usually feel it scratching, rather than just stiff. Heres a tip, bend the last half an inch of your switch cleaner tube at 90 degrees. Makes it much easier to get it in the hole. Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 [quote name='BRANCINI' timestamp='1326197714' post='1493549'] Heres a tip, bend the last half an inch of your switch cleaner tube at 90 degrees. Makes it much easier to get it in the hole. [/quote] Lol.... Welcome aboard Brancini, its not always like this around here. Quote Link to comment Share on other sites More sharing options...
icastle Posted January 10, 2012 Share Posted January 10, 2012 [quote name='Horizontalste' timestamp='1326197923' post='1493556'] Lol.... Welcome aboard Brancini, its not always like this around here. [/quote] No. Sometimes we practice innuendo... Quote Link to comment Share on other sites More sharing options...
mrdreadful Posted January 10, 2012 Share Posted January 10, 2012 In[i] your[/i] end-o! Quote Link to comment Share on other sites More sharing options...
ezbass Posted January 10, 2012 Share Posted January 10, 2012 Funniest thread for ages Quote Link to comment Share on other sites More sharing options...
icastle Posted January 10, 2012 Share Posted January 10, 2012 [quote name='mrdreadful' timestamp='1326210401' post='1493844'] In[i] your[/i] end-o! [/quote] Shut yer face Matron Quote Link to comment Share on other sites More sharing options...
mrdreadful Posted January 10, 2012 Share Posted January 10, 2012 [quote name='icastle' timestamp='1326212538' post='1493884'] Shut yer face Matron [/quote] Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 Now sorted. I applied said lube/cleaner in a vigorous action and whilst doing this my knob got stiffer and then there was a sudden release and now my knob is slack. I am so satisfied. Thanks for all your contributions and keep on truckin. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 10, 2012 Share Posted January 10, 2012 [quote name='Horizontalste' timestamp='1326221969' post='1494071'] Now sorted. I applied said lube/cleaner in a vigorous action and whilst doing this my knob got stiffer and then there was a sudden release and now my knob is slack. I am so satisfied. Thanks for all your contributions and keep on truckin. [/quote] Fine, but how's the bass..? Quote Link to comment Share on other sites More sharing options...
Horizontalste Posted January 10, 2012 Author Share Posted January 10, 2012 [quote name='Dad3353' timestamp='1326222201' post='1494076'] Fine, but how's the bass..? [/quote] Bass............. what bass? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.