Jump to content
Why become a member? ×

9v to 36v preamps?!


Aussiephoenix
 Share

Recommended Posts

I started out as a Passive jazz player.

eventually got into the active basses, but always 9v preamps...

I'm looking at buying another active bass, and I was amazed when the guy I'm going to buy it from told me that I can use UP to 4 9v Batteries, so a total of 36v!!!

:)

Has anyone had any experience with preamps of the kind?

what is the real difference? just volume? are there any sort of guidelines for using these preamps?

Link to comment
Share on other sites

At one time, Status fitted a 36v preamp to their Jonas Hellborg models. -- the preamp was pretty much the EQ section from a channel strip. Apparently the output from these basses was simply colossal.

Link to comment
Share on other sites

Lots of 9V preamps will also run at 18V (e.g. Aguilar OB series preamps).

According to the blurb, the higher voltage will not increase the output but will allow "more headroom". I take this to mean you can use the full range of the EQ adjustment without any distortion or loss of clarity.

The biggest problem with going beyond 18V as far as I can see, would be making space for the batteries !

Link to comment
Share on other sites

You might notice distortion with a 9V if you turn the eq full up, have your pickups set very high and play really hard but most of the time its not a problem.
The main thing is to check out the flat and eq'd sound of pre-amps to see which ones you prefer, as they are all a bit different.

I personally like the sound of musicman preamps, they run off 9V and produce a tiny bit more noise than some others but the eq bands are really well chosen and suit the sound I like.

Bartolinis preamps are very quiet and have quite a hard top end which suits some, and run off 9V or 18V

Aguilar pre's are also very quiet and have a warmer tone and are very flat response with no eq but there's plenty of boost available. They can run off 9V and 18V too.

Sadowsky pre's have also got a good rep but I've not used one myself.

There are a lot of designs out there and these are the only ones I've tried, but see if you can try some out before buying.

Edited by dub
Link to comment
Share on other sites

The old Ovation Magnum 2’s (late ‘70’s) used to use 2 x 9V's. I’m certainly impressed by the way the newer systems seem to drain batteries far less – I use re-chargables and my pre-EB MM Sabre sucks one dry in no time whereas my ‘Ray with a modern Seymour Duncan replacement pre-amp/EQ goes on and on.

Link to comment
Share on other sites

My Zoot uses an SD MMHB into a Jon East E-Pro @ 18v. That gives Monstrous output. It will drive a power amp. Without a(nother) pre in the way. Sounded great through an SWR 2x10 driven by my (deceased) QSC PLX 1202.

It IS designed to give greater headroom, but the pick-up shoves out a fair bit, and when you switch it to "series", run away. [i]Very[/i] quickly, and whatever you do, don't slap it...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...