Jump to content
Why become a member? ×

Where is Thumper (aka BT68) when you need him?


JPJ
 Share

Recommended Posts

Ok, I am currently building this

[attachment=1:P_Hamm_V___Full.jpg]
[attachment=2:P_Hamm_V___Body.jpg]

a five string precision (mighty mite neck, custom body) which is going to be equipped with 2 x Bartolini 'J' pickups + 1x Bartolini 'P' pickups all going via a stock Fender five way switch to a custom East circuit (basically a BTB + MID Sweep pre-wired with vol, output socket and battery clip).
The switching options I want are;

1) Both J p'ups with a slight bias towards the bridge p'up for a jazz bass style finger style setting
2) Bass J p'up with P p'up
3) P pickup on its own
4) P p'up with Bridge J p'up
5) Both J p'ups full on

I can work out how to wire positions 2 to 5 but I am struggling with position 1. I was thinking of measuring the resistance of the pan pot in my J-Retro equipped Jazz bass at my 'stock' mix and bridging the No1 and No5 tabs on the switch with a resistor of equivalent value but then I thought that this will effect the number 5 position, as I was just going to put a jumper wire between 1 & 5 for the both pickups full on option. So now the exam questions;

a) is it possible to do what I want to do?

:) the five way switch appears to have two independent switch matrix's (ie either side). Should I wire all the signals to one side and the grounds to the other or do I just wire the signals and collect the grounds together (John E has helpfully attached two short wires to show me where the signal and grounds connect to his circuit)?

c) if its not possible to do what I want, any ideas what I can do with position 1?

All advice gratefully received!

Link to comment
Share on other sites

A kill switch?

What, you mean guaranteed opportunity to disconnect yourself from any sound at all mid-gig?

Believe me, after twenty odd years (actually make that twenty nine odd years :huh: ) of playing bass, I have found every possible way of disconnecting myself mid-song without ever needing a dedicated kill switch :)

Thanks for the input though!

Link to comment
Share on other sites

I can't see that connecting a resistor between 1 and 5 would make any difference to the sound on 5, as 1 would not be connected and so the resistor would play no part in the signal path.

Unless I've misunderstood you, it's all grand.

Link to comment
Share on other sites

I thought of the diode, but that's starting to get way beyond my electronics capabilities to specify the right parts. I guess I actually need two diodes, one for the 'both on' option and one for the both on but reduced neck p'up option?

Link to comment
Share on other sites

Regarding the diode, something as standard as a 1N4001 would probably do the job.


[attachment=16:Here_we_go_again.jpg]

Top: Probably would work
Bottom: Extra diode, which could be added if the top didn't work properly.


Oh, and regarding the testing of resistance of the JE-Retro, just stick a variable into your circuit, find out what you like it at and change that to a fixed (or preset pot, which is still variable but it won't get changed sitting inside the cavity.)


Sorry for the woeful diagrams, but it's rather early and I have a hangover again :)

Link to comment
Share on other sites

The Fender Roscoe Beck bass has the facility to reduce the neck output slightly as you want to. Roscoe says "a 27k resistor goes across the neck pickup to slightly reduce its output" when you pull up the volume knob. Does that help?

Monster looking bass btw (in a good way!)

Edited by walbassist
Link to comment
Share on other sites

[quote name='JPJ' post='350' date='May 17 2007, 02:21 PM']Thanks for the help guy's, the 27k option is probably the one I'll go for as fitting a variable is probably a bit beyond my electrical abilities![/quote]

What about a dinky lil' trim pot instead? that'd be tweakble for exactly what you want.
Install it so that you can adjust it with a screwdriver through a small hole in the control cavity cover...

Just an idea. My Hohner has one, to match the active level to the passive level so you can go from active to passive or vice-versa without huge volume gains or drops.
Works a treat. Slightly different application here, but the idea seems good.

Link to comment
Share on other sites

[quote name='Oxblood' post='3318' date='May 21 2007, 04:42 AM']I suspect that Thumper is currently unable to get to his computer, having accidentally imprisoned himself inside an enormous Bill Fitzmaurice sub-woofer. That'll teach him to use 5 minute construction adhesive![/quote]


To yourself and to the OP:

Sadly Thumper is no longer with us due to disagrements, so will be pretty much on Finnbass

[url="http://basschat.co.uk/index.php?showtopic=261&view=findpost&p=2767"]http://basschat.co.uk/index.php?showtopic=...post&p=2767[/url]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...