-
Posts
1,021 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by dodgnofski
-
-
A really nice 90's Status Energy which has been converted to Fretless by The Bass Gallery and a rather spiffing job they made of it too The fret grooves on the face of the fingerboard have been filled with a black filler which can be seen by the player, but not from off stage. This together with a lighter filler on the top edge of the fingerboard makes intonation much easier thus allowing mere mortals like me to play a Fretless in tune In good condition with just a few marks from normal use - no damage, or issues. Low action - all the way up the neck, so an absolute dream to play I think the body is Ash with a black see through finish, so the lovely grain can be seen. Maple neck -reinforced with graphite rods and a nice Rosewood fingerboard. Weight is a nice manageable 3.95Kg or 8.5lbs - ish in old money and no neck dive - it just hangs there saying - 'play me' Neck width at the nut is 1.5" or 40mm and 55mm at the twelve fret, but it's the 'skinniness' of the neck from front to back that makes it so damn blinking playable Status Active Electronics board - signed by the man himself Status J type pickups with active treble cut and boost, Master volume and pickup pan pot. Low action and a shiny fast neck. Due to the current shortage of long scale strings from Status, it is currently sporting short scale strings - Status Black Nylon Hotwires which although a bit 'short' seem to work OK, but I'm sure a new owner would want to fit the strings of their choice anyway. Original - prior to them having 'Status' printed on them - Gig bag which is also in good condition. Plays really well and sounds really nice, with plenty of that there mwoarrrrrrr we all love In North Staffs but could post at buyers expense to UK Mailand if required. **Please excuse my rubbish photography - this really does look at least a scrillion times better 'in the flesh' - honest Injun.
-
I had the pleasure to buy one of Justin's one 10 cabs and have to say that he is an absolute Gent, a pleasure to deal with and I would recommend him to anyone Deal with complete confidence Guys, you will not be disappointed Thanks again Justin, all the best Tim
-
-
Eden WTX 260 - rubber feet and screws??
dodgnofski replied to dodgnofski's topic in Repairs and Technical
Thank you, yes I remember them now Unfortunately when I contacted Eden - now Marshall, they said they hadn't got any But thank you so much for taking the time to post the photo - it is very much appreciated and now I at least know what I'm looking for Cheers, Tim -
Hi Chaps, Does anyone know where I can get four rubber feet and the correct screws to fit them from please for an Eden WTX 260 amp? Or, if memory serves - were the feet on these the 'stick on' type ? Or did they just 'plug in' - without the need for screws??
-
Just to reinforce all the good things said on here, Gary is a great Guy to deal with and I would whole heartedly recommend him to anyone. Gary went out of his way to meet up for a great deal and is a true Gent Thanks again - Fab
-
Yes, those were the days - 'Summer is a Bummer' - Aguilar?? - Phwoar !! As Bing & Bob sang - 'Thanks For The Memory'
-
Yes Rik - Tee - Hee
-
Boomshanka !! Thank you - very much appreciated - ta
-
Thanks Kev, Very much appreciated, that's exactly what I was hoping to hear as I have Boss Bass GEB7 - if I needed a bit more depth ''Fab''
-
Hi Chaps and Chapesses, Can anyone give me their opinion on their experiences of the above combo please ? Is it possible to obtain a deep, warm, rich bass tone, only at low volumes and obviously not in a gigging environment - but just for home and studio use?? Thanking you in advance for your help and opinions Cheers, Tim
-
-
John bought my amp and I can say that without fear of contraception - he was an absolute pleasure to deal with from start to finish and I would recommend him to all on here - Great Guy, great deal - thank you again John Tim
-
Alan has just collected my cabs from me - what a thoroughly decent Chap he is, an absolute pleasure to deal with and I would recommend him to anyone - Fab Thanks again Alan Cheers Tim
-
Mattie and his kind good Lady battled through a torrential storm to meet up for a deal : He is great Guy, an absolute pleasure to deal with and I would whole heartedly recommend him to anyone - deal with confidence Guys you will not be disappointed Thanks again Mattie - you are one of the very best Tim
-
Bought recently from this very Parish - but way too sophisticated for my old cloth ears It is in absolutely Mint condition and comes complete with the dedicated padded Gig bag and mains lead. Here's the Blurb :- Sometimes all you need is an amp that can deliver true bass tones but without the hassle of getting out a big rig amplifier. The Bass Cub is 100 watts of pure tone in a “shoebox” size package and so light, it can be lifted even with a finger! It can sit on the floor or on top of a desk. Two independent channels can accept two instruments or one microphone. It also has a stereo input for Drum machine or I-pod/MP3 player. Practicing can be done with the 2 internal speakers or headphones. The BASS CUB comes with a padded carrying bag. With these features and great sound there is no longer an excuse you can not practice. Here's the spec :- Two independent channels can accept two instruments or one microphone. Aux in - with independent volume control 100 watts Switchable Hight / Low input Two 3-band EQ Optical Limiter Headphone Output Tuner Output Pre-amp Line Output Balanced Line Output Two Internal 5-inch Proprietary PJPS Speakers Dimensions: 12 x 10.8 x 7.8 inch (W x D x H) Weighs only 13.2 lbs / 6kg AC Voltage: 100 – 240 Volt / 50 – 60Hz The thing I really liked about this beauty is the two channels - as it doubles up very nicely as an electro acoustic guitar combo - my baby Martin sounded incredible through this and it is small enough to use in the living room, or bedroom as a high quality unit to play your iPod or CD through Just a word about the build quality of this combo - 'incredible' !! - I have seen nothing to compare to the quality of this over the last 40 + years and I've owned, or at least played through virtually everything - umpteen times over Re gigging - despite being rated at 100w - I personally don't think it is loud enough, apart from for the quietest of acoustic Gigs, but with a powered cabinet - the world is your Lobster Can post to UK Mainland at buyers expense - payment via Bank Transrer, or Paypal gift. ps - check this link out :- http://youtu.be/pRMH3a0TV44
-
TC Electronic BG250 Head - **SOLD**
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
TC Electronic BG250 Head - **SOLD**
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
TC Electronic BG250 Head - **SOLD**
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
TC Electronic BG250 watt lightweight head, which is feature packed - built in tuner, Toneprints which are free Aux in / Headphone out for silent practise & you don't even need to plug it into a cab, mute switch for silent tuning on stage, balanced line out and passive / active switch. In original box and condition Looking for £160.00 Although collection would be welcome, I can post out at cost - here are some Specs we all love thank you BH250 Tech Specs Input Input connector 1/4" jack Input impedance 500 kOhm / 100pF Gain range -96 to 36dB Tone control Bass 80Hz @ Gain: -24 to 0dB; 100Hz @ Gain 0 to +15dB Mid 500Hz @ Gain: -24 to 0dB; 800Hz @ Gain 0 to +15dB & 0 to -12 dB Treble / Tweeter Tone Center Freq.: 1800Hz @ Gain: -24 to 0dB; 5000Hz @ Gain 0 to +15dB Tone Print 0 to 10 embedded parameters for TonePrints Tuner Bass Tuner, always on Tuning range B0 (30.87Hz) to G4 (392.00Hz) Mute Mutes speaker out, Phones out and Balanced out Master Level / Headphones Output Studio quality headphone amp HP Out Impedance 40 to 600Ohm Mains supply 100 - 240V~ 50/60Hz (70W @ 1/8 of Max. Output) Power module rating 250w (500w instantaneous Peak @ min. Load) Speaker output Neutrik Speakon™ Balanced output Balanced XLR, Pre/Post Pre-amp Bal. Out Max. +2dBu Bal. Out Optimal Load Impedance 600 Ohm Rehearsal input 1/8" jack input, fits to iPod® Humidity Max. 90 % non-condensing Dimensions 220 x 63 x 231 mm / 8.7" x 2.5" x 9.1" Weight 1.8kg / 4 pounds
-
Pete sold me his PJB Cub and the service was absolute 'mustard' He was an absolute pleasure to deal with and I would recommend him to anyone Thanks again Pete
-
Peter is a great Guy, an absolute pleasure to deal with and I would heartily recommend him to anyone He bought my Warwick 'shorty' Corvette and as it was very much loved, I am cock - a - hoop that it has gone to such a good home Thanks again Peter Tim
-
Rockbass Corvette Active Bass Guitar, which is not much bigger than a regular electric guitar - in fact it actually just fits into a normal Gibson guitar Gig Bag!! In exceptional condition - can't find any scratches, or dings anywhere - albeit with my very old eyes and it's a 2014 model. Low action - all the way up the neck + low weight together with the short scale makes this Bass an absolute dream to play. In fact, it is by a country mile the easiest, most comfortable Bass I have ever played during the past 40 + years and the build quality and finish are second to none. The best on line price for these - if you can find one - is around the £600 mark - however, this is a one off 'Special' - fitted with all black genuine Warwick hardware and so would therefore cost a lot more!! Although this is a shortscale bass, it does not feel cramped when playing, but it is so comfortable to play at the low end, plus normal length strings can be used. The array of sounds available are quite incredible and having active bass and active treble 'on board' saves having to keep adjusting your amp Specs as follows:- Solid Alder Body Maple Neck - 30 / 3/4" Scale Length Rosewood fingerboard - Double Octave - 24 frets Master Volume control Pick up Pan Pot Active MEC J + J Pickups Active Treble cut or boost Active Bass cut or boost Highly acclaimed Warwick 'Just A Nut' III - Fully adjustable nut Genuine Warwick Black Strap Locks Quick release - no screws to undue - control panel cover Weight is just 3.5kg or 7.7lbs Comes complete with Truss Rod Tool and owners manual. Can post via Parcelforce48 for £30 to UK Mainland or you are welcome to pay via cash on collection. If you are close enough Very reluctant sale due to impending car expenses
