dodgnofski

Great little amp with a very varied tone pallet, not a great deal of ‘umph’ - but the Bass boost its really good, enabling a full warm sound at low volume & still loud enough for small Gigs or rehearsals etc. In excellent condition & works really well apart from a slight issue with the mid knob which tends to stick around the two o’clock point, but if it’s pulled out to the second position - it can be turned fully. Specs…… The Eden WTX264 is a lightweight (4.3 lbs), portable bass amp head delivering around 260-300W at 4 Ohms, known for its compact size and professional tone, featuring a 3-band EQ with Mid Shift, Bass Boost, "Enhance" control, built-in compressor, effects loop, DI output with level control, aux in, headphone out, and Speakon/1/4" speaker outputs, making it great for practice, recording, and smaller gigs. Key Specifications: Power Output: ~260-300 Watts @ 4 Ohms Weight: 4.3 lbs (1.95 kg) Dimensions: 8" W x 2.5" H x 9" D (approx.) Frequency Response: 10Hz - 20KHz Distortion (THD): <0.5% (or as low as 0.006%) Damping Factor: 4000 Features: EQ: 3-Band EQ with Bass Boost & Mid Shift (selectable 550 Hz / 2.2 kHz) Tone Shaping: Enhance control (pre-shape), Bass Boost, Mute switch Compression: Auto compressor/limiter Connectivity: Speaker Out: Speakon & 1/4" combo jack DI Out: Balanced with level control Effects Loop: Send & Return Aux In: Stereo (L/R) Tuner Out Headphone Out Footswitchable: Mute & Enhance functions Postage to the U.K. Mainland included.

Small, articulate Bass Cab in excellent condition complete with a Roqsolid cover which is also in excellent condition and worth over £90 alone. Dual Speakon / 1/4” Jack input & link. The OR-110 is a front-ported lightweight 1 x 10” cab with a custom designed Ashdown speaker – making the perfect companion for the OriginAL Head or extension for the OR-C112 combo to achieve the maximum output from the 300-watt power section. The cabinet is constructed using premium grade far eastern ply and is wadded to retain specific frequencies. The fine-tuned reflex port allows for more air to be moved, giving the little cab a surprising volume. Rated at 150 watts at 8 ohms, the OR-110 is one of the most portable cabs on the market. Adding further convenience, there is a top mounted grab handle positioned to offset the weight of the speaker magnet for ease of transport. For those pub gigs, pairing two of the OR-110 cabs provides enough volume to keep up with most drummers without having to DI through the PA. Otherwise – one OR-110 cab alone sits very well as a personal stage monitor, when using the OriginAL Head’s on-board DI to feed the front of house PA. Ashdown have focused their product offering over the past few years, delivering some really inspiring products focused towards the needs of the modern bass player. The OR-110 is no exception to the rule, building on the success of the OriginAL Range and adding something of real value to bass players delivering everything you need from a compact rig solution. The OR-110 Specifications are as follows: H:360mm 14.1” W: 390mm 15.3” 😧 360mm 14.1” Weight: 10.7KG (23.5lbs) Power: 150w Impedance: 8Ohms .Collection from North Staffordshire preferred as l do not have a suitable box at present.

The SWR Workingman's 10" Bass Speaker refers to the popular line of SWR bass combo amps and speaker cabinets featuring a single 10-inch driver, known for their tight, punchy sound, built-in features like Aural Enhancer and Limiter, and portability, making them great for practice and small gigs. These setups often include a 10" woofer and a switchable tweeter, delivering 200 watts of power, offering great SWR tone. Design: Compact, lightweight, front-ported for enhanced bass, often with a tilt-back design. Sound: Known for clear, punchy, and articulate bass, ideal for many genres. Great Small Bass Cab suitable for rehearsal, Studio, home practice and even small Gigs, thanks to the upgraded Celestion BL10-200X 10" 8 Ohm Bass Guitar Speaker 200W & in excellent, fully working condition. Switchable Tweeter for added highs when required. Key Specifications (Workingman's 1x10T Cabinet): Power Handling: 200Watts RMS. Impedance: 8 Ohms. Speaker: (1) Celestion BL10-200X 10" 8 Ohm Bass Guitar Speaker 200W Tweeter: (1) Custom Le-Son Piezo Tweeter with control. Porting: Front Slot Port. Frequency Response: Around 96 dB SPL (or 70Hz-18kHz range). Dimensions (W x H x D): Approx. 16.25" x 14.5" x 14". Weight: Approx. 26-32 lbs. Features: Tilt-back design, so great to use as a monitor 1/4" speaker jacks + internal crossover. Comes with Roqsolid cover worth £50 alone and is also in excellent condition. Collection from North Staffordshire preferred as l do not have a suitable box at present.

Only used for five minutes. Thought I ‘d try these on my Mini P Bass, they sound really good - but I prefer the feel of my nylon coated jobbies under my old fingers. These are apparently specifically made by La Bella to fit the Fender Squier Mini P Bass & are 31 inches from the ball end to where the silks start, so should also fit other short scale Basses with the same dimensional requirements. £25 including postage to the U.K. Mainland. Since the 50s and 60s, La Bella’s DEEP TALKIN’ BASS Stainless Steel Flat Wounds have been the choice of professional bass players and continue to be the standard for the best sounding Flat Wounds on the market. Stainless Steel Flat Wound; hand-polished for incredibly smooth finish 31″ Wound Length (distance from the ball-end to where the silk begins is 31″; the silk must start after the nut and only the silk can wrap around the tuner) Medium Tension String Gauges: .049, .069, .089, .109 Top Load Only (do not string through the body of the bass or they will break) Made in the USA with American Wire Packaged using MAP Technology (Modified Atmosphere Packaging) to prevent tarnishing and ensure freshness This particular set is NOT suitable for basses with bridges that require strings to pass through the body of the instrument. Hopefully, here’s a link to a Chap demonstrating them. https://youtu.be/Da54YGS7ygQ

PM’d

Less than an hours use, so in excellent condition. Light Gauge - .050 / .065 / .085 / .105 Only the E string has been very lightly trimmed, so should fit four in line or two a side. £35.00 posted to the U.K.

Fender ‘stylee’ Jazz & Custom Shop water slide Decals bought recently for a project that never happened. Apparently they are quite easy to fit & there are some spares, just in case you have a mishap, but no use to me now as I no longer have the Jazz😟 £12.50 posted to the U.K.

Thomastik - Infeld Flats - initially a five string set, but can be used on a four string without the C string. Only light use, so may need to be ‘run in’ a bit more. Gauges are - 33 / 43 / 56 / 70 / 100 £35 posted to the U.K. Would trade for La Bella Deep Talkin' Bass 750T White Nylon Tape - 50 to 105 gauge four string.

Doug (Wilkes) is our local Luthier & his Craftsmanship is superb👍

Wow😳😳 What a lovely P + sensible mods❤️❤️👍👍

Oops, sorry🙈 they have been slightly trimmed with plenty of silk left for a good few turns to fit a single sided Fender J or P Bass Cheers, Tim

Bought from this very Parish, but not using them. Had around 20 hours use, so plenty of life left. Slightly Trimmed to fit a P or J with plenty of silk left for a good few winds. Thanks for the heads up. Also fitted my long scale 2 + 2 Yamaha. Quite expensive when new - see last photo of the price on Amazon. Postage included - U.K. Mainland only

This is the very jobbie - very well made & fits like the proverbial glove👍👍 https://ebay.us/m/Qb5nNN