-
Posts
1,004 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by dodgnofski
-
Barefaced One10 250w 8 ohm Cab (On Hold)
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
Tom bought a Cab from me and he was an absolute pleasure to deal with from start to finish👍👍 Thanks again Tom, enjoy the Cab,
-
Barefaced One10 250w 8 ohm Cab (On Hold)
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
Barefaced One10 250w 8 ohm Cab (On Hold)
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
Barefaced One10 250w 8 ohm Cab (On Hold)
dodgnofski replied to dodgnofski's topic in Amps and Cabs For Sale
-
WITHDRAWN Roland Micro Bass Cube RX WITHDRAWN
dodgnofski replied to King Tut's topic in Amps and Cabs For Sale
-
PThis is an incredible compact Bass Guitar Amplifier designed and engineered in Denmark which measures only 6.5 inches wide x 5.2 inches deep and a mere 1.7 inches high & weighs a ridiculous 2lbs - think Trace Elliot Elf at almost half the price - I suspect that this TC BAM 200, the Trace Elliot Elf and the Warwick Gnome are the same amp in three different dresses 😳😳? Bought for me as a present to use with my BF One10, which I have errrr just sold - oops 🙈🙈 & therefore it now needs a new home. It is in mint condition complete with all the original packaging and box. It is only a week old and has only been unpacked, fully tested and put back into the original box. Ideal for either home practise - you can even use it without connecting to a speaker and so practise silently via the Headphone output. Also excellent as a back up amp, as it literally does fit into a Gig Bag, or the pocket of a Bass Guitar Gig Bag or case and even in many jacket pockets. Specs......... Solid State Number of Channels: Single channel Total Power: 200W Class D EQ: 3-band EQ Inputs: 1 x 1/4" Outputs: 1 x XLR (direct out), 1 x 1/4' (speaker) Headphones: 1 x 1/4" Cooling System: High-temperature Automatic Shutoff, Side/Top Air Vents Power Source: Standard IEC AC cable Height: 1.7" Width: 6.5" Depth: 5.2" Weight: 2 lbs. Free postage to the U.K. Mainland only
-
Barefaced One10 250w 8ohm Cab with Silver Vintage Grill & would pass for brand new except for just a tad of the usual minimal tolex lifting on the rear, which obviously does not impede on the outstanding performance of this cab. Save over £100 on the new price plus the three to six week wait according to the Barefaced website. I think we are all aware of the capabilities of these mini marvels, but just in case, here’s some details from Alex. Specs...... DIMENSIONS 15" high x 11.5" wide x 11" deep 38cm x 29cm x 28cm WEIGHT 7.5 kg / 16 lbs (steel grill) 7 kg / 15 lbs (cloth grill) BROADBAND SENSITIVITY 95dB USABLE FREQUENCY RANGE 30Hz - 6kHz RECOMMENDED AMP POWER 100-250W RMS (safe with up to 500W if you're running fairly clean sounds) MAXIMUM OUTPUT ~119dB IMPEDANCE 8 ohms Can post to the U.K. Mainland at cost which will be around £15.
-
WITHDRAWN Eden WTX 264 Amp head WITHDRAWN
dodgnofski replied to Shroombass's topic in Amps and Cabs For Sale
-
Bought some strings from Matt, they arrived quickly, well packaged and as described - therefore I would heartily recommend him to all on here, without hesitation. Thanks Matt
-
Hi, Does anyone know the best way to access the fan from my 802 Combo to remove all the dust and to give it a good clean please? Thanking you in advance if you can help 👍👍 Cheers, Tim
-
-
Bought a Cab from Mike. He is a thoroughly decent Chap and I would heartily recommend him to all BC'ers. Thanks Mike.
-
Barefaced one 10 Sold pending postage
dodgnofski replied to Black Coffee's topic in Amps and Cabs For Sale
-
Wil kindly bought my PJ from me when I was looking for a new good home for it. He is a Great Guy with second to none communication skills and was an absolute pleasure. to deal with.from start to finish. I therefore heartily recommend him to all BC'ers without reservation. Thanks again Wil, hope you enjoy the PJ 👍👍
-
Hotone Nano Legacy Series 5w Bass Amp in ‘as new’ condition. ‘5 watts' you say? - I know, that’s what I thought but with an efficient cab, it sounds very much louder than that. Ampeg SVT emulation - allegedly, never owned an SVT so can’t testify to this, but it sounds Fab and is great fun. Great for home or studio use with a really nice EQ section. Has Aux. In and Headphones / Line out, so great for silent practise. FX Loop for external effects. 128mm x 75mm x 59.5mm Complete with original box and mains lead & 18v adaptor. Postage to the UK Mainland would be £5.00.
-
Chris very kindly called in to collect my bass cab on a long journey home from work. He is a thoroughly decent Chap, a great player and I heartily recommend him to all BC- ers without reservation. Thanks again Chris, it was a pleasure to deal with you 👍👍 All the best, Tim
-
MarkBass 400w RMS 8ohm 2 x 10 Lightweight Neodymium Speakers + adjustable Piezo Horn Bass Cab in excellent, used condition and fully operational - Made in Italy. Comes with 'Viktory' dust cover. Excellent lightweight, powerful, articulate Cab that never ceases to amaze my old cloth ears. May be interested in an exchange involving a small MarkBass Combo, as Gigging days are long gone☹️ I don't have a box for this, so it will have to be collection only at present - sorry. Specs...... IMPEDENCE 8ohms SPEAKER SIZE 2x10 in. BASS PORT rear TWEETER piezo POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 45 Hz to 18 kHz SENSITIVITY 101 dB SPL WEIGHT RANGE 27.78 lbs / 12.6 Kg to 31.97 lbs / 14.5 Kg WIDTH 23.23 in. / 59 cm HEIGHT 12.60 in. / 32 cm DEPTH 17.13 in. / 43.5 cm
-
MarkBass 250w Blackline Bass Guitar Amplifier 2020 model - less than 12 months old - in incredible minty fresh condition and has had very little home use only due to the Pandemic. Comes complete with a genuine MarkBass padded Gigbag which cost £50 alone & is in full working order. These Amps have a fantastic array of tonal variation, providing anything from Old School 'thump' to modern Hi - Fi sounds.Very powerful, especially at 4ohms - one 4ohm cab, or two 8ohm cabs and as Marco himself of MarkBass says, 'The 250w amp is almost as loud at 4ohms as the 500w amp is at 8ohms' A great feature of the Gig Bag is that apart from protecting the amp in transit, the front and rear panels unzip so the amp can stay protected in the Gig Bag while in operation. The build quality and components used by MarkBass are second to none, I have used them for years and they are incredibly reliable and robust.I am also selling my 400w 2 x 10 with tweeter Bass Cab, which is a match made in heaven for this amp - please see my other listings. Here are the Specifications we all love so much..... INPUT: impedance 500 Kohm, max. voltage 15 VppBALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 VppEFFECT RETURN: impedance 33 Kohm, max. voltage 10 VppGAIN: -60 dB to +23 dB rangeMASTER VOLUME LINE OUT LEVEL GROUND LIFT (switch on rear panel)PRE/POST EQ (switch on rear panel)LOW: center frequency: 40 Hz; level: ±16 dBLOW MID: center frequency: 360 Hz, level: ±16 dBHIGH MID: center frequency: 800 Hz, level: ±16 dBHIGH: center frequency: 10 kHz, level: ±16 dBVPF (Variable Pre-shape Filter) center frequency 380 Hz VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz LINE OUT: balanced XLR, max. voltage 20 VppEFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)TUNER OUT: unbalanced, max. voltage 2 VppSPEAKER OUT: speakon/1/4" combo, 1/4" WEIGHT: 5.07 lbs / 2.3 KgWIDTH: 10.87 in. / 27.6 cmDEPTH: 9.84 in. / 25 cmHEIGHT: 3.27 in. / 8.3 cmOUTPUT POWER: 250W RMS @ 4 ohms / 150W RMS @ 8 ohmPOWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale) The Amp can be posted to UK Mainland via Parcelforce 24 for £15.00 The buyer will not be be disappointed with this superb piece of Kit. Thank you for your time and interest.
-
Fender Squier Vintage Modified Precision P/J Bass from 2014 in good used condition, there 'maybe' just a few, marks consistent with age and normal use, but I can't see any with my old eyes. Very rare, especially in this condition and offering the best of both Worlds having both a Precision pickup in the usual place and a Jazz pickup in the bridge position, which are ‘Duncan Designed’ and very powerful. It took me over two years to find this, as they don't come up for sale very often and were only produced for a very short period of time. Nice low action that is so very easy to play and incredibly lightweight at just 3.4kg or 7.5lbs in ‘old money’ Plus there are a vast array of tones available by combining the separate volume controls and master tone control, which have been upgraded to a super high quality KIOgen wiring loom, potentiometers and vintage Cap. I was going to upgrade the Pickups and tuners too, but couldn't see the point as the bass holds tune really well & the Pickups have plenty of 'whumph' Has had a really good set up and a new set of Flatwound strings fitted. Original High Mass Bridge. Plays as well as most of the P Basses I've been lucky enough to own, or play during the past half Century and even better than many. May be interested in a trade, p/x for a P or PJ with a 44mm nut and a nice low action - Japan 62P or Bitsa etc The last pic is for illustration purposes only to show how good the Bass looks fitted with a Tort pick guard - (which is not included in the sale, as it was a gift) - It is a standard 13 hole guard that just fits perfectly with no need for extra holes and they are readily available on the T'inter. The main pics show the Bass with the original black original pick guard fitted as Standard. The finish on this Bass is superb and the build quality is excellent.Comes with an unpadded JHS Gigbag and can be well packaged & posted via Parcelforce 24 for £24.95 - Thanks for looking 👍 Some Specs from the T'inter ......... The Squier Vintage Modified Precision Bass PJ has the form factor of a Fender P-Bass but is armed with a hybrid of a P-bass style split neck pickup and a Jazz Bass style bridge pickup for a powerful and versatile tone! Great for bassists that play lots of different styles from Pop to Rock and everything in-between!Here's what Squier say about the Vintage Modified Precision Bass PJSquier gives you the best of both bass worlds-Precision and Jazz-with the Vintage Modified Precision Bass PJ. Its sleek Precision Bass form features the sonically powerful and tonally versatile combination of a punchy Fender-designed split single-coil Precision Bass middle pickup and a growling single-coil Jazz Bass bridge pickup with ceramic magnets.Other features include a maple neck with "modern C" profile, 9.5"-radius slab rosewood fingerboard with 20 medium jumbo frets, three-ply black pickguard, three "dome"-style control knobs (bridge pickup volume, middle pickup volume, master tone), vintage-style bridge with four single-groove saddles, and vintage-style tuners. Available in Candy Apple Red, Lake Placid Blue and Three-color Sunburst.SpecificationModel Name: Vintage Modified Precision Bass® PJ, Rosewood Slab Fingerboard, 3-Color SunburstModel Number: 0306800500Series: Vintage ModifiedColor: 3-Color SunburstBodyBody Material:Soft MapleBody Finish: PolyurethaneBody Shape: Precision Bass®NeckNeck Material: MapleNeck Finish: PolyurethaneNeck Shape: Modern "C"Scale Length: 34" (864 mm)Fingerboard - Slab Rosewood Radius: 9.5" (241 mm)Number of Frets: 20Fret Size: Medium JumboString Nut: PPSNut Width: 1.625" (41.3 mm)Position Inlays: DotNeck Plate: 4-Bolt Squier®ElectronicsBridge Pickup: Fender-Designed Single-Coil Jazz BassMiddle Pickup: Fender-Designed Split Single-Coil Precision BassControls: Volume 1. (Middle Pickup), Volume 2. (Bridge Pickup), Master TonePickup Configuration: PJHardwareBridge: 4-Saddle Standard Vintage-Style with Single Groove SaddlesHardware Finish: ChromeTuning Machines: Standard Open-GearPickguard: 3-Ply BlackControl Knobs: Dome StyleMiscellaneousStrings: Fender® USA Bass 7250ML, NPS, (.045-.100 Gauges)Unique Features: Fender-designed Split-Coil Precision Bass® and Single-Coil Jazz Bass® Pickups, Vintage Tint Gloss Neck
-
- 1
-
-
Mick bought a KiOgon Jazz wiring loom from me and he was a pleasure to deal with 👍 He is a throughly splendid Chap and I would recommend him to all Basschatters 👍👍 Thanks again Mick.
-
KiOgon Jazz Bass or P/J wiring loom & knobs, bought for a new project, but not used. It you are planning to use for a P/J Bass with the looms existing Switchcraft Jack socket please ensure your existing Jack socket is the type that is on a plate fitted to the side of the Bass & not the Barrel type, but if it is and you are handy with a soldering iron you could just swap the Jack socket on the loom for your existing barrel Jack, just two wires. It would also be ideal for a two pickup custom build. The quality of the parts and John’s workmanship are second to none, it also has the solderless connections that make fitting so easy. Volume / Volume / Master Tone CTS pots with 1/4” solid shafts, Switchcraft Jack and high quality ‘Old School’ Capacitor. Comes complete with Johns excellent fitting instructions and even a mini screwdriver to fit the connector screws. Please note that the diameters of the CTS potentiometer bodies are 7/8ths of an inch, or 22.225mm - so please check that your control cavity is wide enough to accommodate them, or you would need to widen the cavity before fitting. Included are three new black knurled knobs with grub screws to fit the solid shafts. Any questions, please give me a shout 👍
- 1 reply
-
- 1
-
-
Gerry sold me a wiring loom and very kindly threw in some control knobs. He is a great Guy, an absolute pleasure to deal with and is highly recommended. Thank you again Gerry 👍👍