Shylock Posted October 16 Posted October 16 I have just bought a rather nice G&L CLF Research L1000 2018 and the truss rod nut appears to be missing. The person I bought it from was the original owner and, having just messaged him, he thinks it has always been missing and he has never adjusted the truss rod. I attach a picture and all appears there is the thread. It is a dual action truss rod and there is comment on the internet that there should be an integrated bullet that is welded on? Can any one help or point me in the right direction- thanks Quote
Mudpup Posted October 16 Posted October 16 A few years ago i had a USA L2000 that had a rounded off truss rod nut. I think it was a 4mm allen key one. The Bass Gallery repaired it easily without removing the rod and i seem to remember they welded a new one on 1 Quote
3below Posted October 16 Posted October 16 Dual action rod should have the bullet welded on, earlier G&L basses have a removable truss rod nut and mixed reviews. I would take it to a luthier who knows what they are doing. I have two USA G&L basses - one since 1990, totally solid, the other (circa 2006) decided that the trussrod needed to make a break for freedom. You have the bonus of a rosewood fretboard, if a trussrod replacement is needed it is do-able. 2 Quote
neepheid Posted October 17 Posted October 17 Yeah, sorry mate, that doesn't look right - this is my 2020 CLF L-1000... 4mm hex iirc. Quote
Shylock Posted October 17 Author Posted October 17 Thanks and after further investigation it appears the nut has sheared off the rod which explains it. 1 Quote
LeftyJ Posted October 17 Posted October 17 1 hour ago, neepheid said: Yeah, sorry mate, that doesn't look right - this is my 2020 CLF L-1000... 4mm hex iirc. Metric on a US-made bass? I guess pigs can fly! Quote
neepheid Posted October 17 Posted October 17 9 minutes ago, LeftyJ said: Metric on a US-made bass? I guess pigs can fly! According to https://bassesbyleo.com/allen_wrenches.html - G&L (USA) went fully metric in 2006. Quote
LeftyJ Posted October 17 Posted October 17 Just now, neepheid said: According to https://bassesbyleo.com/allen_wrenches.html - G&L (USA) went fully metric in 2006. Ha, TIL! All G&L's I've owned were older (my current ASAT Special is from 2001, it's already got a 4-bolt neckplate but still has the Bi-cut neck with compression style truss rod and bullet nut). Quote
3below Posted October 17 Posted October 17 4 hours ago, Shylock said: Thanks and after further investigation it appears the nut has sheared off the rod which explains it. I had mine sorted by Jon Shuker, now better than when it was new. @Andyjr1515 has documented truss rod replacements, I can also personally recommend @Manton Customs, however I am sure there are similarly skilled luthiers near to you. 1 Quote
Shylock Posted October 17 Author Posted October 17 5 hours ago, 3below said: I had mine sorted by Jon Shuker, now better than when it was new. @Andyjr1515 has documented truss rod replacements, I can also personally recommend @Manton Customs, however I am sure there are similarly skilled luthiers near to you. Thanks and I have since been in fruitful contact with the seller who has agreed to reimburse me. He has already contacted the G&L distributor as in theory he has a 10 year guarantee but unfortunately they have recently gone into administration and getting a fix from them is doubtful. He plans to get it fixed and contact local luthiers but I will pass on the contacts you mention so thanks for those. Once fixed he will give me first refusal which is good because apart from the truss rod it ticks a lot of boxes for me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.