Hipshot 1/2 “ USA Ultralite bushing adapters

[Silky999]

Folks,

 

Just a heads up that the 18mm adapters for USA 1/2” ultralites are getting harder and more expensive to source. I have just bought some tuners from Lozz on here and thought I would get some adapters in as I have before for previous builds. Whether it is Trump’s Tariffs or just supply issues but they are impossible to source in the UK and I was left with two options; direct from USA costing $70 to ship alone or order from Germany at €36 including shipping. Bear in mind that these are normally £5 each from Bassdirect so max of £20-plus shipping. 
 

I think I will have to rethink my tuner choices on builds going forward. 

[MichaelDean]

Guyker told me that they will be coming out with some ½" lightweight tuners at some point this year. I've heard their hardware is pretty good. 

[neepheid]

An alternative solution...

 

https://www.basschat.co.uk/topic/514065-it-came-from-the-black-lagoon/#findComment-5523942

 

[Silky999]

13 hours ago, MichaelDean said:

Guyker told me that they will be coming out with some ½" lightweight tuners at some point this year. I've heard their hardware is pretty good. 

I have used Guyker tuners a few times before and I really rate their stuff. If they bring out a 1/2 lightweight tuner that would be amazing. It’s difficult to get a wide selection of tuners that fit an 18mm hole without some sort of bushing or them being jazz bass type. I have also heard people have used nylon bearings to good effect. 

Edited yesterday at 19:57 by Silky999

[MartinB]

The price of those adapters was already something of a joke. I use strips of veneer to reduce the hole size, same as @neepheid and Gerry Hayes.

 

These are worth considering as a Hipshot alternative:

 

[Silky999]

1 minute ago, MartinB said:

The price of those adapters was already something of a joke. I use strips of veneer to reduce the hole size, same as @neepheid and Gerry Hayes.

 

These are worth considering as a Hipshot alternative:

 

I am going to go nylon bearings to line the holes. Thanks for the heads up about the retro vibe tuners