Allen & Heath CQ desks

[LawrenceH]

I didn't mention but I have also tried v1.1 as I did spot the firmware version might be a potential issue. No luck.

 

Network is not set to connect automatically

[warwickhunt]

1 hour ago, Chienmortbb said:

You need to change the network settings so that networks are NOT connected to automatically. On IOS you need to disable Auto Join for all your networks. I have never found this setting on Android but both IoS and Android assume that you must be connected to the Internet and try to force it by default. In fact Windows does something similar. 

 

I generally don't connect wireless (tend to just use the CQ as is) hence I tend to forget that my android devices need fettling when I do go to use them.  It's even more relevant when infrequent users in various bands that I'm in want to connect and set IEM; I generally have to go round and get folk hooked up after disabling networks.  

[Chienmortbb]

3 hours ago, LawrenceH said:

I didn't mention but I have also tried v1.1 as I did spot the firmware version might be a potential issue. No luck.

 

Network is not set to connect automatically

Did you use a V 1.1 Mixpad?

 

Try running from a computer.

Edited 19 hours ago by Chienmortbb

[LawrenceH]

1 hour ago, Chienmortbb said:

Did you use a V 1.1 Mixpad?

 

Try running from a computer.

Yes, I've installed first v1.2.2 and then uninstalled and installed 1.1.3 on my Windows 11 laptop. However just heard back from the seller that it had the latest firmware so that becomes less likely as an issue. Have put a query on the A&H forum, when I get the chance to be next to it during office hours I'll call their support line, I've read they're generally helpful

Edited 18 hours ago by LawrenceH