Jump to content
Why become a member? ×

2 pedals 1 power supply


KennysFord
 Share

Recommended Posts

[quote name='kennyrodg' post='451566' date='Apr 1 2009, 03:04 PM']Hey all.
I use a modded Boss CS-3 and B....nger limiter.Is it possible to power them both from 1 power supply ??
I dont have a pedal board btw.
Thanks in advance. :ph34r:[/quote]

You can get daisy chain connectors from loads of places that will split the signal up to 8-9 ways for multiple pedals. Just make sure they are the same input rating (some pedals are 18V most are 9 I think) and also that the power supply has a suitable output rating. Most would be more than fine for just the 2 pedals though.

Link to comment
Share on other sites

[quote name='cheddatom' post='451624' date='Apr 1 2009, 03:53 PM']2 pedals 1 power supply....

I was expecting some sort of sick joke![/quote]
If you mean what I think you mean then we both spend too long on the Internet. If you don't then it's just me : )

Link to comment
Share on other sites

[quote name='Tracer' post='452209' date='Apr 2 2009, 10:37 AM']If you mean what I think you mean then we both spend too long on the Internet. If you don't then it's just me : )[/quote]

Hmm I must spend too much time on the internet too as I unfortunately know what you refer to :)

Link to comment
Share on other sites

does anyone know of any 2 chain daisy chains for just powering 2 pedals? i find that with my 5-6 pedal chain when i only want to power 2 pedals it's a pain to keep the unused links apart so they don't touch each other and short out.

Link to comment
Share on other sites

[quote name='oddjob' post='452237' date='Apr 2 2009, 10:02 AM']does anyone know of any 2 chain daisy chains for just powering 2 pedals? i find that with my 5-6 pedal chain when i only want to power 2 pedals it's a pain to keep the unused links apart so they don't touch each other and short out.[/quote]

You could just cut the extra bit off that you don't need - it'll still work, although you'll kick yourself when you buy your third pedal. I put rubber tubing over the tips that I don't use as I'm always messing about with the amount of pedals in my chain; take the lead to a hardware store and try to find the right diameter, then just chop off little pieces that you need.

Edited by dannybuoy
Link to comment
Share on other sites

[quote name='cheddatom' post='452246' date='Apr 2 2009, 11:13 AM']blue tack or insulation tape would stop your problem.

I think there's the product you're after though, just google "two girls one cup".[/quote]
if that fails try out goat.cx

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...