Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

(Sold) Shuker Fretless
£2000


MOXYBASS
 Share

Recommended Posts

My Shuker fretless

I have not used this bass much and is like new 

Any trial - It is with Jon Shuker (in his workshop) 

 

Used but in excellent condition

Collection Only   -   Cash on collection

4 string Uberhorn   (serial number 0001)

34″ scale

double octave

Laminated Mahogany / maple set neck

Phenolic resin thru f/board

two way truss rod

carbon fibre reinforcement

composite nut

fret position edge markers, 2mm side dots

2mm Mother of pearl face dots between G and D string

African Blackwood Headstock veneer

Gotoh GB707 tuners

mahogany body

African Blackwood top

polyester basecoat

gloss lacquer

ABM piezo bridge units (recessed into fretboard)

thru stringing

Graphtech Ghost piezo preamp

3 band Shuker eq

Rear mounted magnetic pickup

Black Hardware

 

Includes - Fitted Shuker case

CASH or Bank Transfer  only

http://shukerguitars.co.uk/stock-4-string-uberhorn-fretless-bass/

 

Screen Shot 2018-06-17 at 21.13.32.png

Screen Shot 2018-06-08 at 17.05.21.png

Screen Shot 2018-06-08 at 17.05.04.png

Screen Shot 2018-06-17 at 21.14.40.png

Screen Shot 2018-06-17 at 21.14.01.png

Edited by MOXYBASS
  • Like 4
Link to comment
Share on other sites

On 15/08/2018 at 21:02, 825463 said:

What is a ‘rear mounted’ magnetic pick up?  

It’s a magnetic pickup that is installed via the rear of the body and is just underneath the neck section through the centre of the body. Think of it in the same way as a pickup installed inside a ramp. I think this is such an elegant way of having pickups on the bass without big black plastic soap bars on show. 

  • Like 1
Link to comment
Share on other sites

19 hours ago, dood said:

It’s a magnetic pickup that is installed via the rear of the body and is just underneath the neck section through the centre of the body. Think of it in the same way as a pickup installed inside a ramp. I think this is such an elegant way of having pickups on the bass without big black plastic soap bars on show. 

Thanks. I’m trying to work out if an ebow would work with this pick up design? Bizarre, I know. 

Link to comment
Share on other sites

An Ebow will work without any problem as it's like having a wood cover for your pickup. All you have to do is locate the pickup to use your effect properly. And it will even be easier to have great sustain effects as the fretboard runs up to the bridge, so the sliding will be effortless. 😉

Link to comment
Share on other sites

13 hours ago, 825463 said:

Thanks. I’m trying to work out if an ebow would work with this pick up design? Bizarre, I know. 

There's no reason why it shouldn't as an elbow doesn't rely on the pickup to operate. :) 

Link to comment
Share on other sites

29 minutes ago, Hellzero said:

An Ebow will work without any problem as it's like having a wood cover for your pickup. All you have to do is locate the pickup to use your effect properly. And it will even be easier to have great sustain effects as the fretboard runs up to the bridge, so the sliding will be effortless. 😉

Oops! I somehow didn't spot your post lol! Beat me to it :) ...should have gone to Spec Sav.. oh wait, don't get me started on that lol.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...