Jump to content
Why become a member? ×

MOXYBASS

Member
  • Posts

    17
  • Joined

  • Last visited

Everything posted by MOXYBASS

  1. I chicken out and I got keyboard player to do on his Nord haha ....... Apparently it was a DX7. Im still messing around but still not near think i need to lock myself in a room for a few days with the editor. Just need to find something similar as a starting point. Loving new manager.
  2. done that and found true faith .... not found anything similar to aha ........ yet - still looking
  3. Hi all Just got my pedal and love it ..... I been asked to do 80/90s gig in 6 days time needing aha - take on me and True Faith (New Order) patches .... i dont think i will have time to create my own without sounding naff ........ any help appreciated
  4. no trades sorry - trying to reduce my collection to single figures 😁
  5. My Shuker fretless I have not used this bass much and is like new Any trial - It is with Jon Shuker (in his workshop) Used but in excellent condition Collection Only - Cash on collection 4 string Uberhorn (serial number 0001) 34″ scale double octave Laminated Mahogany / maple set neck Phenolic resin thru f/board two way truss rod carbon fibre reinforcement composite nut fret position edge markers, 2mm side dots 2mm Mother of pearl face dots between G and D string African Blackwood Headstock veneer Gotoh GB707 tuners mahogany body African Blackwood top polyester basecoat gloss lacquer ABM piezo bridge units (recessed into fretboard) thru stringing Graphtech Ghost piezo preamp 3 band Shuker eq Rear mounted magnetic pickup Black Hardware Includes - Fitted Shuker case CASH or Bank Transfer only http://shukerguitars.co.uk/stock-4-string-uberhorn-fretless-bass/
  6. Tacoma Thunderchief CB10C FRETLESS made in USA. These are rare and made between 2002 and 2005 It has been only been used on 2 studio albums and sat in its case since 2014. Never gigged. Fitted hardcase Also comes with custom fit soundhole cover to reduce feedback if required. 2003 Tacoma Thunderchief acoustic electric bass, USA-made and professionally setup. Thunderchief delivers warm, thick low end without the hollow sound or lack of power often found in an acoustic bass. One of the loudest Acoustic basses I have played. It's a powerful instrument that plays effortlessly with a solid Sitka-spruce top, mahogany back and sides, upper-bass bout “paisley” soundhole, a bolt-on mahogany neck, rosewood fretboard and bridge and Fishman Prefix Plus electronics. The bass is light for size 6lbs. The body measures 17 3/4" wide at the lower bout, with a 4 5/8" body depth, delivering a tone. The rosewood bridge sits flush with the top with ample saddle height, and the satin finish Back and Sides: Solid Mahogany: Neck Bolt-On One-Piece Mahogany Fingerboard: Fretless Rosewood Bridge: Rosewood Fishman Prefix Plus electronic Case: Standard Hardshell Case Collection only Wirral / St Helens / Liverpool
  7. Hi Ordered MB500 fusion which arrives next week. I go away on holiday day after it arrives when I get back I have 2 gigs so wont have time to fiddle with settings. Any settings people use to get me started Switches on the top of unit - anyone use or leave alone for now. Gig 1 :- Rock Covers band (kings Leon - Led Zep) Gig 2 :- Originals - Like Fleetwood Mac / Texas PBass GK MB500 Fusion Barefaced BB2 and Barefaced Midget Ta
  8. [size=3][size=4][color=#000000][font=Arial]£700 for both cabs[/font][/color] [color=#000000][font=Arial]Markbass 1 x15 HR bass cabinet and 102p (2x10) traveller[/font][/color] [color=#000000][font=Times][font=Arial]Gigged but well looked after. The 102p Traveller used more than the 15.[/font][/font][/color] [font=Arial]Powerful but lightweight. Fantastic sound.[/font] [font=Arial]Italian made (better quality than newer Asian versions)[/font][/size] [font=Arial]Specifications from website.........[/font][/size][list] [*][size=3]Rated power: 400 W @ 8 Ω[/size] [*][size=3]Equipped with: 1x 15" neodymium custom woofer (made by B&C) + lateral adjustable 1" compression driver tweeter[/size] [*][size=3]Speaker twist and jack[/size] [*][size=3]Solid metal grid[/size] [*][size=3]Tuned bass reflex port on the back[/size] [*][size=3]Durable felt cover[/size] [*][size=3]Frequency range: 40 Hz - 20 kHz[/size] [*][size=3]Efficiency: 100 dB[/size] [*][size=3]Weight: approx. 24 kg[/size] [*][size=3]Dimensions (W x H x D): 59.5 x 60.5 x 48[/size] [/list] [size=3][font=Arial]102p Traveller [/font][/size][list] [*][size=3]SPEAKER SIZE 2x10 in.[/size] [*][size=3]BASS PORT rear[/size] [*][size=3]TWEETER piezo[/size] [*][size=3]POWER HANDLING 400W RMS (AES Standard)[/size] [*][size=3]CROSSOVER FREQUENCY 3.5 kHz[/size] [*][size=3]FREQUENCY RESPONSE 45 Hz to 18 kHz[/size] [*][size=3]SENSITIVITY 101 dB SPL[/size] [*][size=3]WEIGHT 33 lbs / 15 kg[/size] [*][size=3]Size 23.4 in. / 59.4 cm X 13 in. / 33 cm X 17 in. / 43.3 cm[/size] [/list] [size=4][font=Arial][font=arial,helvetica,sans-serif][color=#000000]Only selling as I do not required such power these days and moved to a small combo for my electric[/color][/font][font=Times][color=#000000][font=arial,helvetica,sans-serif] upright [/font].[/color][/font][/font] [color=#000000][font=Times][font=Arial]Collection only due to size (Wirral/Liverpool)[/font][/font][/color] [color=#000000][font=Times][font=Arial]Can deliver within reason (Preston - Manchester - Wrexham area) please contact before bid.[/font][/font][/color][/size]
  9. just got back from audio repair = the pots and switches are broke hence the distortion - not worth repairing
  10. [color=#141414][font=verdana, geneva, lucida,]I have set the Rane as below[/font][/color] [color=#141414][font=verdana, geneva, lucida,]REAR[/font][/color] [color=#141414][font=verdana, geneva, lucida,]CH2[/font][/color] [color=#141414][font=verdana, geneva, lucida,]combine selected[/font][/color] [color=#141414][font=verdana, geneva, lucida,]4db[/font][/color] [color=#141414][font=verdana, geneva, lucida,]high combine out connect to return effect in amp[/font][/color] [color=#141414][font=verdana, geneva, lucida,]CH1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]4db[/font][/color] [color=#141414][font=verdana, geneva, lucida,]CH1/crossover in - connected to send effect in amp[/font][/color] [color=#141414][font=verdana, geneva, lucida,]-----------------------------------[/font][/color] [color=#141414][font=verdana, geneva, lucida,]FRONT[/font][/color] [color=#141414][font=verdana, geneva, lucida,]CH1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Gate Threshold = full clockwise[/font][/color] [color=#141414][font=verdana, geneva, lucida,]ratio =1:1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Compressor = 0[/font][/color] [color=#141414][font=verdana, geneva, lucida,]ratio = 1:1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Limiter = full clockwise[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Output = 0 [/font][/color] [color=#141414][font=verdana, geneva, lucida,]Bypass button = out[/font][/color] [color=#141414][font=verdana, geneva, lucida,]crossover = 100[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Mode = dual[/font][/color] [color=#141414][font=verdana, geneva, lucida,]CH2[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Gate Threshold = full clockwise[/font][/color] [color=#141414][font=verdana, geneva, lucida,]ratio =1:1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Compressor = 0[/font][/color] [color=#141414][font=verdana, geneva, lucida,]ratio = 1:1[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Limiter = full clockwise[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Output = 0 [/font][/color] [color=#141414][font=verdana, geneva, lucida,]Bypass button = out[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Set above = distorted sound (like fuzz effect) - if bypass CH2 distortion goes away[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Comression threshold light does not come on at all even when moving it to diff levels[/font][/color]
  11. compressor - no compression is occuring
  12. [color=#141414][font=verdana, geneva, lucida,]I'm doing something wrong ................... getting no effect from my Rane DC24 [/font][/color] The manual is not the easiest to follow [color=#141414][font=verdana, geneva, lucida,]Power light = on[/font][/color] [color=#141414][font=verdana, geneva, lucida,]Crossover Engage switch = [/font][/color][i]in[/i] [i]Separate/Combine Outputs switch = [i]combine[/i][/i] [color=#141414][font=verdana, geneva, lucida,]bypass button = [/font][/color][i]out[/i] [color=#141414][font=verdana, geneva, lucida,]All I am getting is amp sound with no effect[/font][/color][color=#141414][font=verdana, geneva, lucida,] [/font][/color] [color=#141414][font=verdana, geneva, lucida,]Using Markbass little amp - on rear of the amp there is [/font][/color][i]effect send[/i][color=#141414][font=verdana, geneva, lucida,] and [/font][/color][i]effect return[/i][color=#141414][font=verdana, geneva, lucida,] what do these plug into on the rane - I have tried several combinations.[/font][/color]
  13. My three Shuker bass The 5-string bolt on and EUB are over 11 year old now (when he was located in Clay Cross !!!) The 5 string bolt on is still my studio bass [attachment=151638:37468_460466365870_1783653_n.jpg][attachment=151639:37468_460466360870_2421214_n.jpg][attachment=151635:40986_466179110870_833725_n.jpg][attachment=151637:38838_460459900870_5835745_n.jpg][attachment=151636:37468_460466355870_2606274_n.jpg]
  14. Two of my collection Shuker EUB [attachment=151632:37468_460466355870_2606274_n.jpg] Shuker Uberhorn (s/n 001) [attachment=151633:38838_460459900870_5835745_n.jpg]
  15. I have been trying to find out what strings on this second hand cheap DB I have just bought and came across this webite [url="http://www.quinnviolins.com/qv_stringidsearch.shtml"]http://www.quinnviolins.com/qv_stringidsearch.shtml[/url]
  16. Hi Anyone seen / tried / heard a [b]Shadow SH RB Pro Rockabilly pickup[/b] ? see link below http://www.thomann.de/gb/shadow_sh_rb_pro_rockabilly_system.htm Thanks
×
×
  • Create New...