Jump to content
Why become a member? ×

stingray 5 intonation trouble


Damonjames
 Share

Recommended Posts

Hey guys n gals,

Just had a rather embarrassing experience while trying to record a bass track for a friend.
The intonation seems fine on the 12th harmonic, but seems out on the 3-5 fretted positions, despite adjustments on the bridge saddle we couldn't get it to play in tune.
I have thought I noticed this in the past, and checked tuning/intonation and just put it down to my ears hearing something that isn't there - apparently it is very much there!!!

I am assuming that this is one of two things, either there is something fundamentally wrong with the neck, or it is a strong issue. For reasons I won't go into here, my lead in to today wasn't the best, so I'm prepared for the lack of preparation comments, but could it just be old strings causing this? Has anyone else with a stingray 5 had this issue?

Any advice greatly appreciated.

Link to comment
Share on other sites

It'd take some serious issue for the neck to be affecting intonation that much - well, enough that you'd notice the bass was unplayable.

Do you not use the SR5 much? Are the strings old?

It'd be my first port of call to swap the strings out.

Are the frets pitted/worn?

All just possibilities.

Link to comment
Share on other sites

Check the intonation by playing/fretting the twelfth (with a tuner) rather than the harmonic if you haven't already.

Nut slots as mentioned above is a possibility also, these can definitely throw things way out. Get the tuner out and observe where it's off and by how much and where it's ok etc and report back :).

Link to comment
Share on other sites

[quote name='RhysP' timestamp='1454790511' post='2973083']
Were you playing along to things that were already recorded?
If so are you sure they were in tune?
[/quote]

Fair point, I struggled tracking against a piano and drum track, the indignity of the keys player "it's a DIGITAL PIANO, durrr"

Had hit a setting on the clavinova he didn't know how to use where you could select something other than 440hz

Link to comment
Share on other sites

If the nut is cut oddly or worn, the string may not be vibrating from the front of the nut, but further back (in the direction of the tuners)
This would have the effect of making the lower frets sharp, becoming less noticeable higher up and, of course bang on at 12th, as that's where you checked the intonation. I wouldn't have thought this effect would be [i]very[/i] noticeable though.

Link to comment
Share on other sites

  • 2 weeks later...

Hey all, sorry for the delay, it's been a crazy couple of weeks!
So I finally got the new stings on the 'Ray, and as expected, had to adjust the truss rod a bit to get rid of the excessive relief (I don't know what strings were on there but they were stainless). I have replaced them with standard sliky's.
The Intonation was being VERY temperamental, but I think I have it close, but will report back again in a day or two once the new strong fa have settled a bit. The nut didn't look unusual by the way.
The interesting thing is that if I set the open string and harmonic to the correct pitch, (mostly e and a string) the problem area around 3-5 was still there. I had to set it up for the right pitch on the lost frets and just accept the compromise up higher.
Will keep you posted!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...