Hugsonic

I second that. I was going to add that if the TH is responsive to touch (not used on) you might want it before the comp so that you can get a bit more grit when you dig in. But if you want it to be consistent put it after. As already said try it both ways.

Not really needed but it definitely needs a TRS cable. Two switches = two channels. Some things support three switches by using both channels at the same time but that needs extra diodes in the switch. Stomp is not one of those though.

You can add two more is a flash with the expression port I think someone is selling a switch and cable on here at the mo. Or you can use midi.

Two pedals in the loops. I use the C4 for envelopes mostly. I have the Stomp octave in a parallel path and switch the gain on the mix for zero to about half. So I can add a clean octave to whatever else is going on. The MC6 really helps as I can select and engage any of the patches from the two synth pedals. The silver button in the middle always sets everthing back to clean basic sound (via MC6).

Here's my advice FFIW. Use the send receive blocks for other effects. You can also add a two button switch for two more stomp switches. Assign one to tuner. Have a play with parallel paths even if it just for clean mix. I will post a pic of mine.

You are of course correct. Not sure the tone of that one will be too good.

I thought the mk1s were reverse P style. I maybe wrong.

I found a small adapter that changed the barrel size. I needed to use a current doubler as well to get upto the 1A+ the stomp needs. In the end I switched to a Ciock DC7 so had to get it all again. Great power supply though, never gonna run out of amps.

I believe older Line 6 stuff had reversed polarity and so there are L6 adaptors around that reverse the polarity. I have a Stomp and it's centre - ve. It does have a slightly bigger power jack so you still need an adaptor.

I believe that is taken as read on this thread.

This made me chuckle. Ive not had my Stomp for very long but playing with the with comps settled on the Rochester. I use it for drive eq and modulation, the other two pedals I have are C4 and FI. The former I really only use for the envelope filters. I have a great octave patch on the FI but like the Stomp one on a dual path with the FI on the other.

I think the 8 blocks is great considering im using up two blocks for my C4 and FI. Doubt the effect loop blocks use much DSP so more free for fun.

What power supply is that?

Gonna need a bigger board.

Latest itteration. Goodbye to the MS3 and Aftershock (for now at least) and hello to HX Stomp. All still on probation.

A future compact and mounting the hub underneath would free a bit of space.

I look at it like it's a separate hobby to itself.

Compact and versatile. Also runs on battery with Joyo JP-05 (for a while anyway). The C4 is mostly replacing the Manta so far. Does anyone know where you can get one of those button covers that will fit the FI. Would go with the nice purple housing its just got. Changed from the super compact and ditched the tuner. Hense button needed.

Hi there. Thinking of swapping my super conpact out so i can use the tuner. What color combos can you do? Black and gold does look rather cool though. Also shouldn't you be updating tbe 1 to 3 now