Bridgehouse

Just under £500 I would say. Give or take a bit.

It’s had a good dry last night and so I cracked on with the final stage. Raided Mrs B’s furniture restoring drawer and stole some of her posh finishing wax. Two coats applied - sparing but not too mean. Work it in, let it dry (15 mins) - then buff with a clean lint free cloth. It’s taken on a lovely lustrous deep satin shine and it has made the grain pop a bit more. Really pleased. It’s onto the build up next.

Badum-tish

Always the way. Stable neck - easy neck adjuster. Wibbly wobbly all over the shop neck = remove 16 screws and resolder 8 wires just to get to the adjuster

Henry the hoover or Henry CEO of Gibson?

My wife would have complemented me on that

There’s been a few occasions with this type of adjuster where I’ve been weirded out by there not being a “proper size” tool and sort of hesitating and thinking “but it doesn’t feel right!” I now have a screwdriver with the right diameter shaft for this job and it’s a right pain in the proverbial when I can’t find it

Welcome to he English language. Vocalist has a Latin/old French origin, whereas Singer is Germanic. Both correct. Vocalist has some traction as a singing descriptor in French music, including plainsong. But as voca is voice rather than speech it’s often used in French and Latin for sung word rather than spoken word. You say potato and I say no ta.

Couple of last minute jobs for tonight - nothing major.. made up the bridge grounding wire and trial fitted the electrics harness.. And whilst I was at it, trialled the knobs.. Yeah, they don't look too bad...

See you could come over to me to try out the QSC, and bring this for me to have a drool over.. you could compare and contrast to my 74 Fender P, or the 64.. or even some of my partscasters which have a bit of this vibe going on!!

Stick to your guns.. most of the other notes are overrated anyway.

Gave it a good few hours to dry out - and I’ve now done a wet and dry pass (1200 grit) with water. Body and neck are both silky smooth, and so I will leave it overnight and give it another pass over tomorrow. It’s looking pretty much how I wanted it to now:

Yes, they are on the Elites

You haven’t seen my ability to ruin a project when it starts looking good though...

They are rare - mainly because the bass buying public likes the Precision/Jazz 1950’s/1960’s formula of an inaccessible nut which needs the neck removing and a stupid imperial sized cross head slot that nobody has a driver for.

My ACG has it, and Stingrays do as well of course. I suspect it’s an aesthetic thing

The Danish Oil is drying super quick in this heat!! So I decided to do a wet and dry slurry sand. For the uninitiated, you use wet and dry paper with the oil rather than water. This is after some 600 and then 1200 grit paper.. you can really see the sheen developing now..

6 hours drying and 3rd coat just gone on.. Needs a dry off and then flatting down - I will use a combination of 0000 wool, wet and dry, and a very fine sanding/finishing block I have - and then a coat of polish to give it some sheen.

When I tried the QSC it wasn’t billed as a standard PA speaker, or actually as an frfr as such - the marketing bumf suggested it was a multi-use cab for a variety of instrument, vocal, live and recorded music applications. As such, the dsp stuff is clearly there for a wider range of applications, for people who are just using one out and about or whatever. I didn’t buy mine based on that at all. I had it set to a default flat eq and a/b’d it with a DXR10 and another. It was flat out better at bass - by a significant margin. It felt better quality and was in special so the price difference was small. I use it as a monitor with DI in from a preamp, and pass through out to the desk. I have used the “bass” setting as a stand-alone - it makes a good backup if my pedal board failed 2 mins before the gig - I’d plug straight in and get on with it. It was always bought as a small footprint easy to cart about live rig when I didn’t need to provide lots of backline heft. I have an EICH t1000 and a vanderkley 2x10 1200w cab for that. In its bag, I can carry it, and a pedalboard and a bass in one trip from car to venue, and take up virtually no space on board at all. I can point it at me directly for monitoring. Sound engineers love the fact they just plug in to it and don’t have to worry about a bass monitor. The rest of the band love it as I take up little room, don’t wash out the sound, and I even angle it towards the drummer to give him a bit more. He loves it too. Our keys player bought one for monitoring such was his enamour.

You’re going to struggle... nothing that would be similar to our concept of an electric bass today.. How about a significant birthday like 18 or 21, so 1964 or 1967?

I got nothing...

No imagination, you lot..

Shurly “Jazzcision” no?

Definitely E string - had one do it on a Precision and swapped it out - issue went. It was as if the string had just deadened out in the middle. Weird, but there you go..