tonyf

[quote name='EBS_freak' timestamp='1320144316' post='1422758'] I think that the advantages of vertically stacked drivers was established long before Alex Claber... [/quote] Bill Fitzmaurice?

[quote name='Delberthot' timestamp='1319984102' post='1420799'] CH guitars and Twin-cam on Ebay seem to have some decent stuff [/quote] I built my Funker Derision bitsa PJ from CH Guitars bits ([url="http://basschat.co.uk/topic/96658-non-sparkle-precision-project/page__st__20__p__1307348#entry1307348"]http://basschat.co.uk/topic/96658-non-sparkle-precision-project/page__st__20__p__1307348#entry1307348[/url]) IMHO, they're REALLY good quality for not a huge cost. T

"If the sh*t fits, wear it"....

+1 for High Voltage. I adore "It's a long way to the top (if you wanna rock'n'roll)". It takes a lot of b*llocks to successfully pull off a bag-pipe/guitar solo in a rock'n'roll tune

Do they do custom colour rickys? If you were in a Clash tribute, you could have a "ShouldIStayOrShouldIGlo"... <PICKS UP COAT AND EXITS>

Great tune / great band. Sometimes, less is more

Like watching a car crash. Awful....

[quote name='Andyjr1515' timestamp='1319119004' post='1410157'] Looks pretty good to me One tip someone from this site gave me which worked well (forgotten who...but thanks anyway) was to pop a chrome pick-up ring around the pickup - hides all the scratches and dints and looks very professional! Other than that, I agree with Liam - it's the sound that'll be the winner Andy [/quote] Cheers guys. Guess you're right about people noticing onstage. It'll sure enough look good enough once I've touched up the paintwork. T

Did a Funker Derision "bitsa" project a couple of months ago and was very pleased with the results. However, I've come to realise that I really miss the back pickup so decided to convert it into a PJ. [attachment=91585:funker derision.JPG] I needed the routing done for the Jazz pickup so whilst my head was saying "get it done properly", my heart said "bah, don't listen to him up there, you can do it yourself and save the money". Therefore, out came the tools and the kitchen table was cleared.... As I'd not got access to a router (and even if i had, i'd probably not be comfortable enough in my own skills to work it properly), I decided to use a combination of drilling, chiselling and dremelling to route out the hole. The first step was to pattern the hole and then start to outline the shape. [attachment=91588:pattern.JPG] I then started the process of drilling round the shape of the pickup recess. Used a big mo-fo drill to do the ears of the Jazz pickup. [attachment=91586:outlined.JPG] Then, with the red mist down, decided it'd be WAY quicker to rough out the innards of the hole with the big mo-fo drill rather than chisel it. [attachment=91587:roughing.JPG] After all this was done, and I'd managed to clear up the kitchen, it was down to the labourous process of tidying up the hole with the chisel and my dremel. TBH, I made a couple of mistakes which I thought I could easily have avoided if I'd have taken a bit more care. For instance, in the process of dremelling the bottom of one of the slots for the ears, the chuck of the dremel touched the paintwork on the edge of the hole and took the paint off. Still, I can always tidy that up with a touchup pen at a later date. What do I think? Well, as it's a project bass, I'm kinda glad I at least had a go. It's not ULTRA tidy but hey, there's bits of the bass which ain't as well. It's good enough for me and it's saved me a bit of cash. [attachment=91589:fitted.JPG] The next step is fit the EMG (the above fitting is using a spare Lindy Frailin as a test) and modify the electronics. This may not be as straight forward as I've got the newer style solderless connection EMG P and controls fitted whereas the Jazz I've plundered from another bass is an Old Skool soldered one. I'll also need to move the jack socket to be side mounted so that's gonna be another hole to drill. T Watch this space.....

I've seen NBZ loads of times over the years. Great player. Fabulous tone. A fantastic show man. T

[quote name='hillbilly deluxe' timestamp='1318805566' post='1406462'] Im sure someone else will give a more precise answer,but there is a website with full scale patterns with all screw hole dimensions out there somewhere.Forget the rest Bass Doc is the best for scratch plates to pattern. [/quote] Brilliant idea. Why didn't I think of that? The drugs, sex and rock'n'roll, that's why Just found a site here [url="http://terrapinguitars.com/pdfFiles.html"]http://terrapinguitars.com/pdfFiles.html[/url] Will speak to Bass Doc. I've made scratchplates in the past but as it's such a phaff, it's probably easier to get one made properly. T

Has anyone got both a Lakland Jo Osborn and a Fender Jazz? Are the scratchplates the same size? Or thereabouts? Want to change the scratchplate on my JO but they're not exactly commonly available items, save ordering from someone like Jeannies Pickguards, paying a lot of money and having to wait weeks for delivery. Failing that, any Jazz owners in Solihull? Can I check my plate against yours? Cheers T

Good work Nige ;-)

We supported her in Bromsgrove a few months ago. Had a great time. We really liked Toyah. She's a really nice person, a great performer and has seriously good musicians playing with her. Enjoy! T

one string still too many. and you can remove all but the first three frets. no need to go beyond them.....that's the bad place..... ;-)