-
Posts
255 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by mrn1989
-
EBS Microbass 3 - Spares or Repair £100 - *SOLD*
mrn1989 replied to attackbass's topic in Effects For Sale
-
I purchased and built one of these, works great for me and simple enough https://www.musikding.de/MINI-HP-VONG-filter-kit
-
x2 Alto TS215 Speakers - £450 the pair, no postage, may delivery locally 550W continuous, 1100W peak Class D power 15-inch LF driver, 2.5-inch high-temperature voice coil 1-inch neodymium HF driver with precision waveguide Bi-amplified design with precision active crossover and EQ Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls XLR Link output Ground-Lift switch Contour switch for increased EQ control Electronic clip, thermal and transducer overdrive protection Compact, lightweight, trapezoidal cabinet design for easy transport and installation Can be used as main PA speaker or in floor monitor application Stand and pole-mountable with integral M10 suspension points Designed and tuned in the USA Output Power 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF) Low Frequency 15” (381 mm) woofer, 2” (51 mm) voice coil High Frequency 1” (25 mm) neodymium driver Crossover 2 kHz Maximum SPL 129 dB peak, 126 dB continuous (dB-SPL @ 1 m) Frequency Response 50 Hz – 20 kHz (+ 3 dB) Frequency Range 43 Hz – 22 kHz (-10 dB) Coverage 80°/100° H x 60° V nominal Connectors (2) 1/4” (6.35 mm) TRS or XLR inputs (1) XLR link output Cabinet Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Controls Volume, power on/off with LED, clip limiter with LED, ground lift Protection Electronic clip, thermal and transducer overdrive protection Power AC Input: 100–120/220–240 V, 50/60 Hz Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V Dimensions (width x depth x height) 15.60” x 14.04” x 25.68” 396 x 357 x 652 mm Weight 32.72 lbs. 14.84 kg
-
-
- 1
-
-
https://richtonemusic.co.uk/gr-bass-at208-8-aero-tech-2x8-bass-cabinet-2nd-hand/
-
Great tweaker pedal for shifting the mid range on passive or active basses The Bass Mid Control is the active mid-controller for bass players. A small but powerful pedal that provides frequency control adjustments between 120Hz ~ 3kHz. When using 2-band EQ or passive bass, the Frequency control provides excellent manipulation of the mid frequencies, while the Boost/Cut gives you boosting or cutting capabilities of up to + / - 12dB. This compact pedal can also be powered by a 9V battery or for additional headroom use an 18V power adapter. This pedal will provide you the flexibility to play any musical style. Size(W/D/H) - 90mmx50mmx70mm Weight - 320g True Bypass Switching Power Consumption - 9VDC/3.3mA (*18VDC- only with DC adapter jack. 18VDC/6.6mA) Battery Type - 9VDC (006P) ×1 £50 posted. No original box but will be sufficiently packed
-
+1 sold me a Barefaced BB2, delivered next day cant fault the process, super swift thanks!
-
I don't play but the singer in my band plays and runs a online weekly Harmonica Club for all everyone drop him a message, may be useful for someone looking for likeminded people or help/advice https://www.facebook.com/profile.php?id=100089237623632
-
They announced a stand at NAMM.....so maybe something is on the horizon?
-
This is my ampless and mains power free rig, works a treat
- 183 replies
-
- 6
-
-
Greg purchased a pickup from me, paid quick, delivered quick. Great guy to deal with enjoy mate!
-
£80 ovno Special Delivery Included in price. May be interested in a trade for a guitar wireless system. I had this in a 1991 Stingray that I've just put back to tock and sold so I have no use for it currently. Really balanced pickup and it has the flat pole pieces, which personally I prefer over the staggered ones on the stick MM pickups. Obvious play wear but functions as should 18cm of clean cable left no fixings or box. Spec: Wire: 42-gauge Formvar wire Magnets: Alnico V Leads: Single conductor, heat resistant Teflon® coated Works as a direct replacement but if unsure the dimensions can be found here http://www.aguilaramp.com/wp-content/uploads/aguilar-pickup-4mjhc.pdf
- 1 reply
-
- 2
-
-
FS/FT: EBS Classicline 1x12 cabs x2 - £175 for the pair - *SOLD*
mrn1989 replied to mrn1989's topic in Amps and Cabs For Sale
- 6 replies
-
- ebs
- classicline
- (and 6 more)
-
FS/FT: EBS Classicline 1x12 cabs x2 - £175 for the pair - *SOLD*
mrn1989 replied to mrn1989's topic in Amps and Cabs For Sale
- 6 replies
-
- ebs
- classicline
- (and 6 more)
-
FS/FT: EBS Classicline 1x12 cabs x2 - £175 for the pair - *SOLD*
mrn1989 replied to mrn1989's topic in Amps and Cabs For Sale
- 6 replies
-
- 1
-
-
- ebs
- classicline
- (and 6 more)
-
Owned from new, purchased in 2015 from Bass Direct alongside the Reidmar 250 Head, served me greatly over the years, played many gigs and never let me down. I switch the bottom cabs stock speaker out for a 450W Eminence Kappa 12A driver fairly early on, my idea was to go for a speaker with a little more mid push and to my ears it works great, that was also purchased new from Lean maybe in 2016. Reason for sale is switching to a BB2. They have plenty more life in them, look tatty but function perfectly, I added extra feet so it cable be vertically stacked and stable, I found I ran them this way for pretty much every gig. Stock cab 250W 8ohm, Kappa cab 450W 8ohm. £195.00 £175.00 Collection ideally from High Wycombe but I may be willing to drive to deliver for a fee but no postage. Ok, try me with trades for pedals guitar or bass
- 6 replies
-
- 2
-
-
- ebs
- classicline
- (and 6 more)
-
Darkglass MicroTubes X 120 Shipped to UK - *SOLD*
mrn1989 replied to biro's topic in Effects For Sale
- 1 reply
-
- 1
-
-
Darkglass Microtubes B3K Mk.1 - £100 - *SOLD*
mrn1989 replied to mrn1989's topic in Effects For Sale
-
Darkglass Microtubes B3K CMOS Overdrive Mk.1 Great overdrive, but I fancy a microtubes X so gonna let it go, I had issues with the original footswitch engaging, so I got a new one from Darkglass and it was just as bad so I replaced for a Lehle switch which is much much better, will include a new spare if you fancy changing back for some odd reason. Pedal works great has all original 'case candy' £100.00 Payment via PPG, Buyer pays fees or Transfer. FREE Special Delivery 1pm
- 1 reply
-
- 1
-
-
Brought a pedal from @berserker, super fast next day delivery no complaints thanks!
-
MarkBass UK maintenance - help needed please!!
mrn1989 replied to kolossusuk's topic in Amps and Cabs
Real Electronics did work on a couple MB amps for me in the past, couldn't fault them