mrn1989

RCF Mixer added

bump

Bump

Pm’d

RCF - F10XR £150 10-Channel Mixing Console with Multi-FX & Recording, PRO DSP FX 2/3-Band EQ, Stereo Recording & Playback. Fully working, inc box and power supply. Postage £10. PPG or Buyer Pays Fees. *****SOLD***** Citronic PL1080 Power Amp - £130

x2 Alto TS215 Speakers - £450 the pair, no postage, may delivery locally 550W continuous, 1100W peak Class D power 15-inch LF driver, 2.5-inch high-temperature voice coil 1-inch neodymium HF driver with precision waveguide Bi-amplified design with precision active crossover and EQ Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls XLR Link output Ground-Lift switch Contour switch for increased EQ control Electronic clip, thermal and transducer overdrive protection Compact, lightweight, trapezoidal cabinet design for easy transport and installation Can be used as main PA speaker or in floor monitor application Stand and pole-mountable with integral M10 suspension points Designed and tuned in the USA Output Power 1100 W peak (700 LF + 400 HF) 550 W continuous RMS (350 LF + 200 HF) Low Frequency 15” (381 mm) woofer, 2” (51 mm) voice coil High Frequency 1” (25 mm) neodymium driver Crossover 2 kHz Maximum SPL 129 dB peak, 126 dB continuous (dB-SPL @ 1 m) Frequency Response 50 Hz – 20 kHz (+ 3 dB) Frequency Range 43 Hz – 22 kHz (-10 dB) Coverage 80°/100° H x 60° V nominal Connectors (2) 1/4” (6.35 mm) TRS or XLR inputs (1) XLR link output Cabinet Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille Controls Volume, power on/off with LED, clip limiter with LED, ground lift Protection Electronic clip, thermal and transducer overdrive protection Power AC Input: 100–120/220–240 V, 50/60 Hz Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V Dimensions (width x depth x height) 15.60” x 14.04” x 25.68” 396 x 357 x 652 mm Weight 32.72 lbs. 14.84 kg

Both straps are used but in good condition, were used with straplocks, non smoker, no pets... They are both the XL which are 42"-54" (106 - 137cm) £20 each or £32 together. £5 posted. PPG or buyer pays fees

Cheap copy of a Darkglass B7K, the build quality is ok, all works and it sounds decent but I much prefer the MicrotubesX and my MicroBass2 so no need to keep this. £40 £35+postage. PPG or Buyer pays fees

Great tweaker pedal for shifting the mid range on passive or active basses The Bass Mid Control is the active mid-controller for bass players. A small but powerful pedal that provides frequency control adjustments between 120Hz ~ 3kHz. When using 2-band EQ or passive bass, the Frequency control provides excellent manipulation of the mid frequencies, while the Boost/Cut gives you boosting or cutting capabilities of up to + / - 12dB. This compact pedal can also be powered by a 9V battery or for additional headroom use an 18V power adapter. This pedal will provide you the flexibility to play any musical style. Size(W/D/H) - 90mmx50mmx70mm Weight - 320g True Bypass Switching Power Consumption - 9VDC/3.3mA (*18VDC- only with DC adapter jack. 18VDC/6.6mA) Battery Type - 9VDC (006P) ×1 £50 posted. No original box but will be sufficiently packed

pm'd

£80 ovno Special Delivery Included in price. May be interested in a trade for a guitar wireless system. I had this in a 1991 Stingray that I've just put back to tock and sold so I have no use for it currently. Really balanced pickup and it has the flat pole pieces, which personally I prefer over the staggered ones on the stick MM pickups. Obvious play wear but functions as should 18cm of clean cable left no fixings or box. Spec: Wire: 42-gauge Formvar wire Magnets: Alnico V Leads: Single conductor, heat resistant Teflon® coated Works as a direct replacement but if unsure the dimensions can be found here http://www.aguilaramp.com/wp-content/uploads/aguilar-pickup-4mjhc.pdf

try me with trades

£190?