Chienmortbb

On the grub screw length problem, you can buy shorter ones.

I would buy 10 of the Sound City heads I had in the late 60s plus.............

You are quite right but for me the preference for a lightweight Class D head comes from necessity, I can no longer hump two large lumps of iron around at close to 69. So yes that puts valve amps out of the question. I love my old HH amps but they were designed to sit on top of a 4x12 and my cabinets are smaller than that. Even the best Class A/B amps (ABM) overhang my current cabs. I think of it like this. If I were a mechanic, I would use Facom or Snap-On tools, but for me my Lidl spanner set works, has never let me down. The same goes for my amps, The Bugera Veyron has never let me down and is manageable and does not look silly on top of my cabinet. Another point, modern cabinets are smaller. It made sense for big wide amps when sat atop a cabinet 2ft6 wide (750mm approx). Newer cabinets tend to be designed single or vertically aligned speakers as speaker design and drivers have evolved.

The patches on tho seem a lot less gimmicky than the standard patches on the B1 ON. Have you kept any of them?

Thanks for that. I have just got one so those are going on tomorrow.

Some info on laminated and whole wood necks. https://youtu.be/C3ZECDPBmRk

@Passinwindhas a design and I have some PCBs for it but I don’t know how close it is to the Alembic/Wal. You can get three PCBs from OSHPark or I have a spare one. You can find details over on the other place https://www.talkbass.com/wiki/pw3b-lpf-open-source-onboard-preamp/

Thanks that is nice and easy.

Yes. I could just put some epoxy under it but that is a bit permanant.

The Perspex panel on the bass is vibrating with low notes on the E and B string. Has anyone else had this and how did you fix it?

Probably a re-imagining of the MAG series but I will say one thing. The headphone socket is 3.5mm someone has actually USED the headphone output and realise that headphones usually come with a 3.5mm not a 1/4" plug.

I believe that is the same amp/preamp combo that was in my BLX130 and I can only agree with you.

As far as I know that is class A/B with Mosfet output stages like the old Trace amps.

Yes I thing the OP meant class A/B.

You have built a P/J version of a Westone Thunder. Looks great by the way.

What the feck has need got to do with it? On another note, I asked someone at Ashdown what the best amp they have ever made was tghe answer was ABM series, No question!

Mutual coupling is what you call proximtty effect and the height that it is broken depends on the cabinet design, especially the baffle. Mechanical coupling is a real no no.

Of course by lifting the cab you will lose the mutual coupling with the floor.

TH That is why I recommended the Sontronics, it has switchable polar pattern but room acoustics are just as important.

Your patch cables seem to be bent a little too much.

Sorry, too heavy for me

In defence of Mesa and the dealers, first shipment of any electronic product is always a movable feast. As a manufacturer, you plan for a specific first shipment date but that is based on each step from design, to full production running smoothly. At Panasonic we would always do a pre-production run to test the production process, one month before full production. Any problems found on pre-production could lead to one or two month's delay in first shipment depeding on the severity of the problem. The products made made on the pre production run were used as demo samples. So there could be demonstration units around some 8-10 weeks before sale stock was available. Of course each company is different but that is how it was at Panasonic when I was there.

Hands Up, I was wavering for a while. I will continue as long as someone wants to play with me!

69 in December and will stop whne no one wants me anymore.

They left the Z Organ off but it’s no dealbreaker. I have just ordered one,