briansbrew

Found the bridge cover so the other one has to be about somewhere

Due to the scuffs I am reducing this to £120 delivered Maruszczyk bass bag These are £299 from. bass direct, price to include delivery to UK addresses From BD site MARUSZCZYK INSTRUMENTS Bass Bag ‘Red Crackle’ • Soft and crackle sheep leather • Padded with 20mm upholstered layer • Strong 10mm zip • With carrying handle and backpack straps • 2 outside pockets • For basses up to a length of 123 cm • Weight: ca. 2.50 kg • Finish: red Handmade in Europe Some little scuffs to the bottom edges, no holes or tears

I bought this off Andy Travers but I have my eye on something special so funds needed.. The specs from Andys post A very lovely and high quality/spec parts build 51 Precision Bass Guitar Build Ash Body - Nitro Finish Fender 51 Neck - Nitro Refin Gotoh Reverse Machine Heads Bakelite Pickguard (Nitro Lacquered) Bakelite Saddles Lindy Fralin Pickup Switchcraft Jack Luxe Phonebook Capacitor NOS resistor All Slot Head Screws (As Per 51 spec) 10.2lbs The original build cost was in the region of £1500…which was spent by someone else… Comes with a Modern Fender Gig Bag. Price includes shipping to the UK

I bought these off Funkle at the start of this year, put into a Jazz that I build but I have since parted it out so up for sale A little damage to bottom of the pickup housing to accomodate the screws but does not impact on the pickup, here is the original listing.. Another find from my extensive and unusual parts clear-out. This is a set of Celinder SS Humbucker Alnico Jazz Pickups. Truly a unique set of pickups. I only know of one other person who has a similar set - I think it might be @Kiwi if I recall correctly. I had these made as a custom order direct from Aaron Armstrong back in 2013. I had them made for a Celinder 60's Jazz Bass I owned at that point, and they served me well when mated to a John East J-Retro. When the bass was sold, I reverted it to the original single coils. So these are humbuckers nearly identical to those in every Celinder Update Jazz bass (70s Jazz bass tributes), except they are alnico instead of ceramic. This was to give me a sound more typical of a 60's Jazz, but without the hum. It worked. (Aaron tells me the humbucker design has two coils rotated through 90 degrees, with magnets in the middle of them pressed up against a blade of steel, which in turn runs down the whole length of the middle of the pickup.) They are very low output and low impedance. They have a sound extremely near to single coils - as with other Celinder Updates - but they must be mated to an active preamp to have typical instrument level output. It's been a minute since I used them. But when removed from my Celinder, they were fully working, and I expect them to perform normally. A new set of these would probably be around £250, I think. Ask Aaron, I guess, he would tell you. Price to include postage to the UK

A lovely Luthier made Jaz body with curly maple cap, Mahogany body Finished in clear Lacquer Neck pocket fits Fender sized necks Will come with the new bridge and strap pins on it Weight is just under 3kg's with the bridge and pins on Maple cap is 10mm thick Much better looking in the flesh Price to include shipping to the UK

Thanks pete...

Bump

Cheers John

Thanks Paul..

Thanks Tony, very nice example

Here we have a 1977 Fender precision in Olympic white This was a one owner from new which I got after he passed, been well looked after and all original right down to the screws and covers No Fender case as it had seen better days but the one pictured will come with it At some stage the pots were changed out for more modern ones but fortunately he kept the originals which are now installed Frets are very good, the body has now gone a nice yellow colour which is common for OW guitars Apart from the dinks at the bottom the body is in good shape, neck is true and no dents at the back, truss rod working as it should Weight is just shy of 4.4 Kg's Nut width is 42mm Pickups dated to 77, pots dated 76 and serial on the back of the plate matches the headstock It currently has rounds but I might see if I can get some flats for it if you prefer Lovely dark board and good action.. Any questions please get in touch and thanks for looking

And up

Looks more like a dog chewed a bit out 😂

Just checked and youur looking at about €1850 delivered

I can send it from the Irish republic and you avoid the brexit fees and any custom charges.

Yes but it was modded slightly to fit a normal jazz pickup.

Up she goes

Weekend bump

Thanks for checking Ash

I bought these for a project that never happened, used but in good condition, £90 £60 including delivery to UK addresses

dont the Vintage Fenders have a clear coat sealer on them prior to painting, I had a Mocha brown one that I took the paint off with nail polish remover...

Cant open the attachments

And up she goes