Ampeg venture V7 into Ampeg Svt212 - no sound

[Scott 999]

Ok, so having settled on the above pairing, I've finally put them together and... nothing, no sound. I don't have another cab or head to test them individually at the moment

 

Am no wondering if I'm doing so thing daft. Has anyone else had this issue

 

P.s. it's not the mute switch

Pps I'm using an nl2 speakon to jack cable

[BassmanPaul]

Thy a different speaker cable would be the first step.  A speaker cabinet can be easily checked for operation by using a jack cable into the cabinet and touching the terminals of a 9V battery across the other end. Should produce a hearty thump from the speakers.

[BassmanPaul]

Just as a thought: does the amp have an Effects Loop?  If it does then try linking the Send and Return jacks with a signal cable. The normalizing contacts on these jacks are notorious for corrosion because they are not used that often. When this happens they fail to pass a signal through the loop.

 

[BassmanPaul]

OK You've had more than a day - what news?

 

Edited July 2 by BassmanPaul

[BassmanPaul]

Hello @Scott 999 - is anybody out there?

 

Edited July 2 by BassmanPaul

[BassAdder60]

Just a guess but does the V7 have a headphone switch ? I recall Ashdown did this as well and it mutes the main speaker out ! Just a thought 

[Lozz196]

49 minutes ago, BassAdder60 said:

Just a guess but does the V7 have a headphone switch ? I recall Ashdown did this as well and it mutes the main speaker out ! Just a thought 

That’s a good call, the amount of times I’ve panicked at a gig when my RM500 didn’t work only for it to be this. 

[BassmanPaul]

@Scot 999 The OP hasn't been back since the day he joined up so I guess nothing we say is of interest to him. Sad that!

 

Edited Friday at 17:01 by BassmanPaul

[Russ]

On 04/07/2025 at 04:19, Lozz196 said:

That’s a good call, the amount of times I’ve panicked at a gig when my RM500 didn’t work only for it to be this. 

If you put the RM heads into their little woolly gig bag, that switch inevitably gets pressed. I love my RM800, but that's a definite design flaw! 

[Lozz196]

Yeah I’ve actually printed out on Dymo tape an instruction to check that if no output, and stuck it on the amp panel near the controls.