Raslee Posted July 22, 2022 Share Posted July 22, 2022 Just wondering if anyone would know which model Hipshot extender detuner would be used with my Maruszczyk Elwood jazz - seems to have the standard tuners from them. I’m think BT7 but not sure. Quote Link to comment Share on other sites More sharing options...
Supernaut Posted July 22, 2022 Share Posted July 22, 2022 Looks like the BT10 would fit. 1 Quote Link to comment Share on other sites More sharing options...
Jean-Luc Pickguard Posted July 23, 2022 Share Posted July 23, 2022 The BT10 will have a smaller capstan diameter than standard tuners. I think the BT7 might be a better fit, but will most likely require new holes for the retaining screws. 1 Quote Link to comment Share on other sites More sharing options...
Dov65 Posted July 24, 2022 Share Posted July 24, 2022 BT7 dimensions 1 Quote Link to comment Share on other sites More sharing options...
Dov65 Posted July 24, 2022 Share Posted July 24, 2022 Sure I had the same type of tuners on a CIJ Geddy that's on your Elwood...I used BT2. Quote Link to comment Share on other sites More sharing options...
ezbass Posted July 24, 2022 Share Posted July 24, 2022 I used to have a BT1 fitted to my ‘off the peg’ Jake. 1 Quote Link to comment Share on other sites More sharing options...
Raslee Posted July 24, 2022 Author Share Posted July 24, 2022 6 hours ago, Dov65 said: BT7 dimensions Purely coincidence but I’d printed this earlier today and it seems to fit the bill apart from the wider end screws are about 2mm further apart. I should of taken a shot of the front which shows the peg being the ball end type, not a straight shaft of the BT2. I’ve got a BT1 on my stingray and the tuning peg is much shorter on that than the Elwood - thanks for your input guys, hugely appreciated 😊 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.