Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Please sanity check this P bass clip for possible recording issues


JonnyBGood
 Share

Recommended Posts

Not entirely happy with my new Squier  Affinity PJ bass tone,  which I bought for some recordings only and intending to record direct to interface. Before I ask about  possible pickup upgrades elsewhere on the forum, I'd be grateful if you guys that record with P basses could have a listen to this recording to help me rule out any possible recording errors on my part.

The dry recording is P pickup only, tone wide open, played with pick between the P and J pickups, recorded direct to Scarlett interface @ 24/44.1 (inst. level), with zero post processing, fresh Ernie Ball Slinkys. I'm not a recording noob (though its been a long time since I recorded bass) so I'm pretty sure there's nothing amiss with the recording  - but asking here just in case I am about to have a forehead slap moment.

To my ears this sounds really  dead, muddy and muffled. Is this what I should expect from a typical P bass recorded dry, or from a Squier?

 Wet track has a shitload of EQ and is approaching something acceptable for me.

Thoughts?

Dry.mp3 Wet.mp3

Link to comment
Share on other sites

Disclaimer : I'm a drummer, and quite (no, very...) old, with duff hearing. Of those two tracks, however, I hear nothing amiss. I'd be surprised to hear the sound of the 'wet' track recorded 'dry' from a 'P' bass. If that's the sound you're after, carry on with the '*-load' of EQ; there's no problem with that. The 'dry' sound is a perfectly reasonable, dry (d'uh..!) bass, played with a pick, max tone and DI'ed with no amp. It's certainly not 'dead', 'muddy' nor 'muffled'. What are you monitoring through..?
Just my tuppence-worth, subject to completion, correction and/or contradiction from others. B|

Edited by Dad3353
  • Like 1
Link to comment
Share on other sites

43 minutes ago, Dad3353 said:

Disclaimer : I'm a drummer, and quite (no, very...) old, with duff hearing. Of those two tracks, however, I hear nothing amiss. I'd be surprised to hear the sound of the 'wet' track recorded 'dry' from a 'P' bass. If that's the sound you're after, carry on with the '*-load' of EQ; there's no problem with that. The 'dry' sound is a perfectly reasonable, dry (d'uh..!) bass, played with a pick, max tone and DI'ed with no amp. It's certainly not 'dead', 'muddy' nor 'muffled'. What are you monitoring through..?
 

Ok, thanks for that.  I should say I'm not aiming to get my wet sound straight from the pickup, but maybe more in that direction? I have this clanky Precision sound in my head and the dry recording seemed an awfully long way from it.  Perhaps I need to lower my expectations of what is normal for DI bass.

My studio monitors are Tannoy Reveal, cans are Beyer DT770.

Link to comment
Share on other sites

1 hour ago, JonnyBGood said:

Ok, thanks for that.  I should say I'm not aiming to get my wet sound straight from the pickup, but maybe more in that direction? I have this clanky Precision sound in my head and the dry recording seemed an awfully long way from it.  Perhaps I need to lower my expectations of what is normal for DI bass.

My studio monitors are Tannoy Reveal, cans are Beyer DT770.

Perhaps lowering your strings and not your expectations would help ?

It sounds OK to me, but I'm not a P-bass player. If it's clank you want then a bit more string-fret noise might be what's missing. I know if there's not some of that going on with my basses I think  they sound a bit lifeless.

YMMV

  • Like 1
Link to comment
Share on other sites

OK many thanks for listening and input guys, that's unanimous & just what I needed to rule out any recording issues.

14 hours ago, ahpook said:

Perhaps lowering your strings and not your expectations would help ?

It sounds OK to me, but I'm not a P-bass player. If it's clank you want then a bit more string-fret noise might be what's missing.

I know what you mean but my action is already about 2.5-2mm, as low as it will go without lots of buzzing (with current strings) which is not what I want.

 

46 minutes ago, Nobatron said:

Sounds like a normal P bass recorded dry to me. An amp sim would probably get you closer to where you want to be. If you haven't already you should grab the free Amplitube SVX SVT sim whilst it's still available.

 

I thought about an amp sim, saw that thread and actually tried to install this a few days ago, I had several problems with the installation and registration procedure and eventually gave up as I couldn't be bothered to raise a ticket thru their customer support process. Maybe I'll revisit this one, I think you're probably right that my ears want to hear an amp & miked up cab.

  • Like 1
Link to comment
Share on other sites

44 minutes ago, JonnyBGood said:

OK many thanks for listening and input guys, that's unanimous & just what I needed to rule out any recording issues.

I know what you mean but my action is already about 2.5-2mm, as low as it will go without lots of buzzing (with current strings) which is not what I want.

 

I thought about an amp sim, saw that thread and actually tried to install this a few days ago, I had several problems with the installation and registration procedure and eventually gave up as I couldn't be bothered to raise a ticket thru their customer support process. Maybe I'll revisit this one, I think you're probably right that my ears want to hear an amp & miked up cab.

as per another thread I started, maybe give this a go? Free to demo, costs about £8 to buy

https://www.2getheraudio.com/effects/rich/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...